Brick Making Machinery

RTQT9 automatic concrete block production line RT9A is fully automatic concrete block production line, universally used for producing block, brick, pave, curbstone and so on. REIT has started to produce concrete blocks making machine since 2001, via rich experience, RTQT9 has became a relatively mature equipment provides high quality block/pave. The concrete block press was developed by introducing German technology and combined with the domestic market. Its control system is at the domestic advanced level, and its performance and technical level are comparable to foreign equivalent equipment. 1.Composition of RTQT9 automatic production line. Rt9a automatic production line consists of five parts: batching and mixing system, forming system, conveying system, stacking system and control system. 1) Batching and mixing system: Bottom and fabric batching station, bottom and fabric mixer, batching weighing and conveying system, cement weighing and conveying system; 2) Molding system: Fixed molding host (including fabric device) system and plate feeding machine; 3) Conveying system: Wet product conveyor, product brush, plate lifting machine, plate lowering machine, sub parent car, pitch machine, turnover machine, pallet bin, etc; 4) Palletizing system: Full automatic palletizer, finished product conveyor and pallet bin; 5) Control system: Molding control system, product conveying program control system, batching and mixing program control system, full-automatic sub mother kiln car program control system and full-automatic stacking control system. 2.Introduction to the technical characteristics of the production line equipment of the production line: ● equipped with automatic batching system, accurate batching and convenient proportioning adjustment; ● equipped with microwave humidity measurement system, which can ensure accurate water cement ratio and product quality; ● the whole line adopts the international brand Siemens PLC program control, and has the function of computer central monitoring; ● Fuji frequency converter, an international brand, is adopted in many parts of the whole line to realize stepless speed change. Electrical components are provided by world-famous companies and operate reliably. ● the main molding machine adopts integrated vibration excitation table and fully synchronous vibration mode, which is the best vibration effect of the machine; ● adopt fast cloth technology and low-speed cruise technology to greatly shorten the forming cycle; ● the unique insulation board insertion technology realizes the fully automatic production of insulation blocks; ● it has a special mechanism for the production of large curb stones, which can produce large curb stones with a length of 800-1000mm. ● the hydraulic system adopts hydraulic components of well-known brands such as Taiwan, Japan and Italy; ● it is equipped with automatic fault diagnosis system, and the production program can be monitored on the screen; ● it has the function of remote diagnosis and repair; ● adopt international advanced welding technology and use super strong section steel raw materials to make the body firm and durable; ● wide range of products. Replace the mold and produce floor blocks, curb stones, porous bricks, blocks and other products; ● thick walled rectangular steel frame, four column guide, extended guide sleeve, solid and durable structure.

The block making machine can be universally used for the manufacturing of pavers with and without face mix, kerbstones, hollow blocks and similar elements. 1、Body. The cement block making machine is built of strong section steel with 4 guiding columns with which the mould moves up and down. The seat of mould is equipped with synchronized connecting rod so that both sides of two end of mould is up and down synchronously. The mould and mould head linked with their seat through the special rubber bush. 2、Filler System The filler system is integrated one which can be moved out or into body when need. The filler box and hopper is fixed on the support frame. Their height is adjustable according to the product height. The capacity of base concrete hopper is approx 680L and outlet is driven by hydraulic cylinder. The filler box is driven by hydraulic cylinder and the guiding rollers are inside of U rail. In the filler box there are rotating bars with sticks driven by a hydraulic motor, which with concrete compulsory movements can make the filling process fast and wet concrete in the mould well-distributed. As the final result the products are high quality. 3、Compacting system The system consists of two twin-shaft heavy-duty special synchronous vibrators fixed on vibrating table, the vibrator having 2 synchronized unbalances and generating vertical oscillations. Due to this force the vibrating table, the pallet and the mould filled with concrete, move up and down. The concrete in the mould is compacted. The vibrator is Patent product which equipped the electronic brake system (also Patent). The vibrating frequency and amplitude is adjusted according to the products and material. There are many shock absorbing pads between vibrating table and body. 4、Hydraulic station The hydraulic station consisting of a large-sized oil tank, oil pump, electric motor and cooling system is integrated together with the valve station beside of the block machine, which is separated with block machine and linked with soft heavy duty hydraulic pipes. The oil pump, valves, cylinders and element are Japanese products such as Yuken.

Product Description: The Brick Plant Machine is an automatic brick making plant designed to produce solid or hollow bricks with a capacity of up to 600,000 bricks per day. While all machine choose should follow the capacity requirements of customers. If one day 100000 bricks is required, then smaller machine, and hoffman kiln or the smaller tunnel kiln is advised. For the kiln, we have Hoffman kiln, drying chamber, masonry tunnel kiln, prefabricated tunnel kiln and rotary kiln for differnet investment condition. Normally, we advise customers to prepare the land at the area of around 30000M2. Of course, the biger land can provide more space for the storage of the finished bricks and raw materails. Auto brick making machines can be divided into the material feeding machine, crushing machine, mixing machine, extruding machine, cutting machine, and stacking machine etc.Kiln can be Hoffman, tunnel kiln, rotary kiln, while we recommand the rotary kiln which is most widly used in China at presnet. Finished bricks can be solid clay bricks, hollow clay bricks, thermal blocks, etc. Halstec, give you the best design for the Brick Plant Machine with a complete brick production solution. It is designed to provide high efficiency, low energy consumption, and cost-effectiveness. With its advanced technology and reliable performance, this automatic brick manufacturing plant can be used for a wide variety of applications.