Building Materials

This Insulation Board Bonding Adhesive system made by YouXing Shark is specially designed for bonding external wall insulation composite panels and prefabricated energy-efficient building components. It works well with a variety of finishing materials, including calcium silicate board, ceramic tiles, aluminum, galvanized steel, cement board, gypsum board, marble, and fiber cement board. It also bonds insulation materials like rock wool, EPS, XPS, polyurethane foam, phenolic boards, and vacuum insulation panels effectively, ensuring the stable integration of multi-layer insulation structures. Created specifically for external wall insulation boards, sunroom structures, and prefabricated building systems.

Truck Panel Adhesive is a high-efficiency adhesive developed specifically for structural bonding of composite panels in refrigerated truck bodies and special vehicles. It is compatible with a variety of exterior materials, including fiberglass, pre-coated steel, aluminum alloy, and stainless steel, and effectively bonds insulation cores such as EPS, XPS, and polyurethane panels to wood-based substrates, forming a high-strength, lightweight composite structure. The bonded components maintain stable strength after 50 thermal aging cycles between -40°C and 70°C, demonstrating excellent weather resistance and making it suitable for cold chain transportation and outdoor vehicle applications. With high bond strength and batch stability (99.99% production consistency), the system ensures long-term reliable performance and uniform panel quality in continuous production environments.

This Clean New Material Adhesive is specifically developed for cleanroom panel and door manufacturing, where structural strength, environmental safety, and long-term stability are critical. It is compatible with a wide range of substrates including Galvanized steel sheet, rock wool, magnesium oxide board and magnesium sulfate board, aluminum sheet, aluminum honeycomb core material, paper honeycomb core material — making it ideal for multi-layer composite cleanroom structures. The formulation is solvent-free and formaldehyde-free, supporting green building and controlled-environment standards. It has been verified under -40°C to 70°C thermal cycling (50 cycles) with no strength reduction, ensuring reliable performance under temperature variation. With a load-bearing capacity up to 1100 kg without panel deformation, and bonding strength 80% higher than conventional single-component systems, the adhesive achieves 100% substrate failure under testing — indicating true structural bonding capability.

Aluminum Industry Specific Adhesive Bonding Materials: Aluminum panels, Galvanized steel sheets, Aluminum honeycomb cores, Color- coated steel sheets (Color steel sheets), Aluminum corrugated sheets Applications: All-aluminum furniture, Ceilings, Wall panels, Cabinetry, Automotive crash panels, Toilet partitions, Exterior wall panels, Petroleum floating roofs Zero-formaldehyde additive is the technical trend of adhesives, we are centered around user needs, extracted from natural plants in the core components, leading research and development of formaldehyde-free plant adhesive. Excellent bonding toughness, excellent roller peel strength, no aldehydes green protection, so that your board in the market more competitive advantage, more market favor, strong toughness of the product, open the board does not burst mouth, to help you save money on materials, so that you do not have after-sales worries.

We produce high-strength aluminum extrusion profiles for solar panel frames, widely used to frame solar photovoltaic panels. Raw material adopts 6063-T5 aluminum alloy, featuring high structural strength, strong corrosion resistance, oxidation resistance and good flatness, which can effectively protect solar panels and extend service life. Available surface treatment: silver anodizing, black anodizing, customized colors. Precise extrusion size ensures seamless assembly of solar modules. We support customized section sizes, lengths and machining services such as cutting, punching, tapping, corner code assembly according to customers’ drawings. OEM & ODM customization is supported. Located in Foshan, China, our aluminum factory owns full automatic production lines, strict quality inspection system, factory direct selling price and stable delivery cycle. We export solar aluminum frames to many global photovoltaic manufacturers. Solar factories, photovoltaic component manufacturers and solar engineering suppliers are welcome to contact us for favorable quotations. Detailed dimension drawings and specifications are available on our official page: https://www.aluleader.com/product/industr , ial-aluminium- profiles/aluminium-solar-panel-f , rame-profiles/

Minimum Order: 10 long tons

We supply high-quality exposed frame curtain wall aluminium profiles for architectural exterior facade engineering. Our curtain wall aluminum profiles adopt 6063-T5 aluminum alloy material, with stable structure, strong load-bearing performance and excellent weather resistance, widely used in commercial buildings, office buildings, shopping malls and high-rise building exterior curtain wall systems. Available surface treatments: anodizing, powder coating, electrophoretic painting, wood grain transfer, fluorocarbon coating, anti-corrosion and long service life. We support customized size, section structure and color according to project drawings, provide mold customization, cutting, CNC deep processing service. Factory direct supply, stable quality, reasonable price, strict quality inspection before shipment, timely delivery. Architectural engineering companies, curtain wall manufacturers and global building material distributors are welcome to send drawings for quotation and cooperation. More detailed cross-section parameters, sizes and installation details can be viewed on our official product page: https://www.aluleader.com/product/archite , ctural-aluminium- profiles/exposed-frame-archit , ectural-curtain-wall-aluminium-profile/

Minimum Order: 10 long tons

We supply special Fasha aluminium window profiles of L, T, Z series, specially developed to match Ethiopia local window market demand. Made of standard 6063-T5 aluminium alloy, high hardness, good toughness, stable structure, perfectly fit traditional Fasha window installation habits in Ethiopia. Multiple surface treatments are optional: matte & bright anodizing, powder coating, electrophoresis, wood grain finish, anti-rust and weather-proof for long-term use in outdoor environment. We support customized extrusion mould, cutting length, color and processing service. OEM & ODM orders are acceptable according to local drawings and requirements. Our factory is located in Foshan, China, with complete production lines, strict quality control and factory direct price. We have rich export experience to Ethiopia and East Africa countries, stable lead time and flexible MOQ. Window factories, building material wholesalers and local construction merchants from Ethiopia & East Africa are welcome to send drawings for quotation. More detailed cross-section parameters, sizes and installation details can be viewed on our official product page: https://www.aluleader.com/product/archite , ctural-aluminium-profiles/l- t-z-zekolo-fasha-a , luminium-window-profiles/

Minimum Order: 10 long tons

GFS (Glue Fused to Steel) tank is a storage tank assembled from enamel steel plates, stirrups, self-locking bolts, sealant and other accessories on site. It combines the strength of steel and the corrosion resistance of porcelain glaze, and it is been widely used for drinking water engineering, aquaculture sewage engineering, landfill leachate treatment engineering, municipal sewage treatment plant, industrial sewage treatment engineering, kitchen waste treatment engineering, biogas engineering and biomass natural gas engineering. Enamel assembled tank has the advantages of short construction period, strong corrosion resistance, arbitrary expansion and relocation, and its service life is up to 30 years. The surface of the tank is smooth and moist, bright and bright, and the color of the tank can be customized according to the needs of users, especially suitable for the requirements of modern factory construction. GFS Drinking Water Storage Tanks Advantages Excellent anti-corrosion performance. Smooth, cohesionless, anti-bacteria. Wear and scratch resistance High-inertia, high acidity and high alkalinity tolerance.. Fast installation with better quality: design, production and quality control in factory. Less influenced by local weather. Safe, skill-free: less working aloft, no need for long timeworker training. Low maintenance cost and easy to repair.

GFS bolted tank is made of glass fused to steel plate, special sealing material, self-locking screw and other materials. The thickness of enamel steel plate can reach to 20 mm, the most used steel plate thickness is 3~10 mm, steel plate has surface oil, contain rust, contain oxide skin, after shot blasting, sand and other pretreatment process, the steel plate surface will be clean. After 900 ºChigh temperature second enamelingl in electric furnace ,0.3 mm enamel coating is applied on both sides of steel plate. strong binding force between enamel coating and steel plate. Enamel coating can not only prevent tank corrosion, but also has the function of strong acid and alkali resistance. And has extremely strong wear resistance. Advantages of Glass Fused to Steel Sewage Collection Tank Compared with concrete or carbon steel welded tanks, the advantages of GFS Steel bolted tanks are listed below: Low Cost The installation, disassembly, migration, and resettlement of GFS bolted Tanks are convenient and fast, and do not require a large amount of labor and large installation equipment. The quality is stable and the corrosion resistance is excellent, so the maintenance cost is very low. Carbon steel welded tanks and concrete tanks are installed on-site and usually involve sealing and waterproofing, long installation intervals, and the installation process are easily delayed due to bad weather (such as rain or wind), resulting in high installation costs. In some cities, there may be restrictions on the use of sealants, resulting in delays or high installation costs. GFS tanks are more convenient and environmentally friendly without on-site finishing.

Glass-fused-to-steel Tank refer to glass-lined storage tanks, also known as some GFS storage tanks. Glass is melted with steel to enhance its performance. Fusion is important because it is single steel, and it is the same for the environment. When the fusion of steel and glass is completed, the strength increases and the wear resistance decreases, as does the suitable pH value scaffold for alkaline solution. Such ponds are generally considered to be one of the important components of environmental technologies, such as anaerobic digestion tanks, wastewater treatment and fireproof storage. They are industrial water storage tanks. The glass fused on the stainless steel tank panel is coated with glass enamel inside and outside. The enamel has a strong, bright, smooth silicate coating. Advantages of our Sludge Storage Tank 1. Short construction period and low cost. 2. Excellent corrosion resistance, service life> 30 years. 3. Easy to install, no need for large-scale installation equipment or very skilled worker. 4. The tank volume can be expanded according to your requirements. 5. Removable, relocated and reinstalled. 6. Exquisite appearance, the color of the tank can be customized. 7. Modular operation, on-site assembly.

GFS bolted tank is made of glass fused to steel plate, special sealing material, self-locking screw and other materials. The thickness of enamel steel plate can reach to 20 mm, the most used steel plate thickness is 3~10 mm, steel plate has surface oil, contain rust, contain oxide skin, after shot blasting, sand and other pretreatment process, the steel plate surface will be clean. After 900 ºChigh temperature second enamelingl in electric furnace, 0.3 mm enamel coating is applied on both sides of steel plate. strong binding force between enamel coating and steel plate. Enamel coating can not only prevent tank corrosion, but also has the function of strong acid and alkali resistance. And has extremely strong wear resistance

GLASS LINED TO STEEL TANK is assembled on-site from special enamel steel plates, stirrups, self-locking bolts, sealants and other accessories. The raw material of the steel plate is a titanium-containing enamel hot-rolled plate developed in cooperation with domestic first-tier steel companies, which is formed using fast and low-cost on-site assembly technology. After the enameled steel plate is fired at a high temperature of 820°-930°, the enamel will fuse with the surface of the steel plate to form a strong and chemically inert inorganic coating with excellent corrosion resistance. The enamel process is currently the most advanced coating anti-corrosion technology in the steel storage tank market. Glass Lined Steel Tank Advantages Short construction period, cost-effective tank solution Superior corrosion resistance, service life is more than 30 years Easy to install, no need for big installation equipment and/or very skilled labor, the quality is highly guaranteed. Tank volume can be easily expanded or can be dismantled, removed, and relocated Elegant appearance, tank color can be customized

Marble Finish SPC Floor Tiles Luxury Marble Look Without the Stone Maintenance ZORUNHOT's marble finish SPC floor tiles deliver the visual impact of natural marble — veining detail, high-gloss or satin surface options, and consistent large-format tile sizing — for hotel lobbies, retail flagship stores, and feature areas where design impact matters, without the cost, weight, and ongoing maintenance burden of natural stone. Each tile is digitally printed with marble veining patterns before the wear layer is applied, giving designers a way to specify a high-end look across large floor areas without the seam and color-matching constraints of natural stone slabs.   Why Specify Marble-Look SPC Over Natural Stone No acid etching or resealing: natural marble requires periodic sealing and is vulnerable to etching from acidic spills (wine, citrus, cleaning products); the SPC surface coating resists staining without this maintenance cycle Consistent veining across large areas: natural marble slabs vary batch to batch, making large-area color matching difficult and expensive; printed veining patterns stay consistent across the full order quantity Lighter weight, simpler installation: SPC tiles install via floating click-lock without the structural load considerations or specialist installation crews that natural stone slabs require Lower landed cost for large-format projects: for hotel and retail projects covering large floor areas, marble-look SPC significantly reduces material and installation cost versus natural stone while preserving the intended design aesthetic  Designed to Hold Up Under Hospitality and Retail Traffic Because the core contains no organic material, the tile is 100% waterproof and resists warping in lobby entryways exposed to weather-related moisture and frequent cleaning. The double-layer UV coating resists staining and scuffing from rolling luggage carts and high foot traffic, while preserving the printed veining detail's appearance over time better than a polished natural stone surface, which can show wear patterns and lose its sheen in high-traffic zones. The same coating resists surface burns from contact with lit cigarettes without scorching the wear layer.

Vinyl Enhanced SPC Floor Tiles Vinyl Enhanced SPC Floor Tiles Commercial-Grade Durability for High-Traffic Spaces ZORUNHOT's vinyl enhanced SPC floor tiles are built for spaces that see constant footfall and equipment movement — airport terminals, shopping malls, schools, and retail corridors where standard residential-grade flooring wears out fast. The enhanced vinyl wear layer adds an extra level of scratch and abrasion resistance on top of the standard SPC structure, extending service life in environments where flooring gets replaced on a tight maintenance budget cycle. For distributors and contractors supplying commercial fit-outs, this product line is positioned for bulk specification on projects where durability under heavy use is the deciding factor.   Built for Where Standard Flooring Wears Out Fast High-footfall durability: the enhanced wear layer resists scuffing and surface dulling from rolling luggage carts, foot traffic, and equipment wheels — relevant for airport terminals and shopping mall corridors Heat exposure tolerance: the surface coating resists localized heat exposure from sources like dropped cigarettes without scorching, useful in transit hubs and outdoor-adjacent commercial entries Consistent batch quality for large projects: produced on automated lines for tile-to-tile color and texture consistency, which matters when ordering enough volume to cover an airport concourse or multi-floor retail space Click-lock floating installation: faster turnaround for large commercial floor areas compared to glue-down alternatives, reducing project downtime Engineered for Volume Procurement The enhanced vinyl surface uses a double-layer UV coating that resists staining from commercial cleaning chemicals and high-frequency mopping, common in transit hubs and retail environments with strict cleaning schedules. Since the core contains no organic material, the tile remains 100% waterproof and resists warping from spills, weather-related entry moisture, or cleaning crew washdowns — a relevant factor for entryway and corridor specifications.   Applications Commercia , l: Airport terminals, shopping malls, retail corridors, schools and education facilities, offices, and other high-footfall public spaces where flooring needs to withstand continuous traffic between renovation cycles. Residential: Entryways, living areas, and other rooms where households want commercial-grade wear resistance in a residential setting.