Building Materials

Transparent and bright, adding a unique decoration to your space. Not only beautiful but also practical. Blue-violet ripple crystal hot melt tile is a kind of decorative building material, mainly made of crystal tiles with wave-like texture, the color is mainly blue-violet, fixed by hot melt technology. It features an obvious wavy texture on the surface and is colorful. It can be used in indoor or outdoor walls, floors and ceilings to create a unique artistic effect, and is a very fashionable building decoration material.

UNIAXIAL-GEOGRID PRDOUCTS-TENSILE STRENGTH 100-200 MPA,GOOD QUALITY AND GOOD PRICE. Uniaxial geogrid is a type of geogrid made from a single, linear network of polyester or polymers. It is designed to reinforce soil when stretched lengthwise along the sheet. This geogrid is commonly used in civil engineering applications such as reinforcing roads, walls, and embankments. Uniaxial-geogrid has a high tensile strength and modulus( the ratio of stress to strain in a material under stress). Its tensile strength is 100-200 MPa, providing soil with an interlocking system for force bearing and diffusion. Structure and functions: Uniaxial geogrids are popularly made of high-density polyethylene (HDPE) with oblong hole meshes that are stretched and pressed into thin sheets. When laid in the soil, their interlocking effect creates an efficient stress transfer mechanism, allowing local loads to spread quickly and effectively over a larger area, reducing local damage stress and prolonging the project's service life.

Steel plastic geogrids are composite geogrid materials with a steel wire wrapped within the HDPE (high-density polyethylene) mesh strips. Steel plastic geogrids feature high strength, low elongation, excellent corrosion resistance and anti-aging. Process: The steel-plastic composite geogrid is composed of high-tensile steel wires with polyethylene (PE) or other components, extruded to form high-strength, anti-pull strips with embossed surfaces and coating. Steel Plastic Geogrid Size: 3.95*5 Color: Black Width: 1-6m Length: 50-100m Tensile strength:20kn,30kn,50kn,80kn-200kN/m Material: HDPE,carbon steel wire Application: Expressway, railway, soft soil subgrade, retaining wall

POLYESTER GEOGRID-BIAXIAL POLYESTER(PET) GEO-GRIDS, UNIAXIAL PET GEOGRID, WARP KNITTED PVC COATED PET GEOTEXTILE Polyester geogrid, simplified as PET Geogrid, is manufactured from high molecular polyester multifilament yarns by warp knitting / weaving and coated with PVC. Polyester biaxial geogrid is mainly used for civil engineering such as highway, railway, hill side slope treatment, structural layers for construction and products for water conservancy projects. Using Method: 1. The paving surface for geogrids should be relatively flat. After the paving layer is accepted, longitudinal skewing should be prevented by first drawing a white line or hanging line according to the width of the geogrids in the paving layer, then beginning with paving. U-shaped nails should then be used to fix the end of the grating (4 nails per meter wide, with uniform distance). 2. After fixing the end of the geogrids, a laying machine or manual method should be used to slowly pull the grille forward to lay. Every 10 meters should be manually inspected and straightened once until a full section of the grille is finished before laying the next section; this process should be repeated. 3. Successive paving: Geogrid roll length should be used as a unit for paving section length. After paving a section of geogrids or river bank section, an overall inspection of the quality of paving should be conducted before proceeding to paving the next section. Uniaxial PET Geogrid with HDPE Coating We provide polyester geo-grid as primary reinforcement with HDPE coating for a design life of 120 years at 30°C. Geogrid Uniaxial PET with low density polyethylene sheath and ultimate tensile strength of 200kN/m. It offers ultimate tensile strength for reinforcement in flexible retaining wall etc. Polyester Biaxial Geogrids Polyester biaxial geogrids are characterized by high tensile strength, small fracture elongation, and a low creep coefficient. The temperature resistance range is -70 degrees Celsius to 180 degrees Celsius, and the geogrid is also resistant to UV radiation and microbial corrosion. The width can reach up to 6m, resulting in high tensile strength at low strain capacity. Longitudinal and transverse ribs work together to fully utilize the geogrid's embedded locking effect on the soil body. During production, the polyester geogrid is pressed with a rough pattern to enhance the roughness of the surface and improve the friction coefficient between the geogrid and the synthetic soil body. Polyester geogrids are not eroded by acid, alkali, salt solutions, and oil at room temperature, do not dissolve in water or succumb to microbial attack, and can withstand UV light and oxygen erosion. Furthermore, the junction will not crack or break due to the synergistic force of the longitudinal and transverse ribs. In actual engineering, after compaction of the filler, it meets permanent engineering construction needs.

Fiberglass geogrid is an excellent geosynthetic material for asphalt pavement reinforcement and road base strengthening. This type of goegrid is a semi-rigid mesh product with high tensile strength and low elongation in both warp and weft directions, and it has excellent properties such as high temperature resistance and aging resistance. It is widely used for asphalt pavement, cement pavement and road base reinforcement, railroad road base, dam slope protection, airport runway, sand control, and other engineering projects. This allows it to be used, and rutting, which ultimately solves the issue of asphalt pavement being difficult to strengthen. Fiberglass geogrid to use in paving overlay to strengthen road surfaces, resist cracks Specification: Fiber glass geogrid,100 kN/m,300 C fusion point Fiberglass grogrid is laid over concrete roadway crack, then over lay with 2 to 3 inches of asphalt. Fiberglass geogrid-4x4mm or 5x5mm geogrid fiberglass fabric without adhesive to put into an epoxy matrix. Fiberglass Geogrid Mattress for construction project in a bituminous concrete parking area Customized specifications 1) Fiberglass Geogrid with asphalt coated 40kn x 40kn 2)Fiberglass Biaxial Geogrid of min. 80 KN.m tensile strength, used as a reinforcement layer in asphalt road pavement. 3)Fibra de vidrio Geogrid/tela del geotextil, geogrid fiber glass mat with asphalt. 4)Fiber glass geogrid with tensile strength ≥ 50 kn for use in Panama.

Polypropylene geogrid is a high-strength reinforced geosynthetic material made of polypropylene (PP), extruded, stretched in one or two directions, or ultrasonically welded. It has a tensile strength of up to 50kN/m. It's usually 3m-6m wide and 50m long. Mainly two types according to construction: polypropylene PP biaxial-geogrids, PP uniaxial-geogrid. Polypropylene geogrids have many advantages, including high strength, a stable structure, anti-aging, and corrosion resistance. It is mainly used in highways, railroads, slope protection, large landfills, and other soft soil engineering reinforcement, enhancing the bearing capacity of the soft soil foundation, preventing surface cracking, collapse, and providing easy construction and reduced maintenance costs. It can also be commonly used as double-tensioned plastic mesh mine roof for underground coal mines and polypropylene PP geogrid as fire retardant safety nets for protection. PP geogrid Color:Black or Customer's Request Tensile strength: 15KN-50KN Raw Material: Polypropylene Plastic Mesh Size: 33*33mm 39*39mm 65*65mm Usage: Soil Reinforcement Length:50-100m/roll Width-Unia , xial:1-2.5-3m Width-Biaxial:3-6m PP Biaxial Geogrid: Roll size: 3.95m by 50m or 5.90m by 50m or customized. PP-biaxial warp-knitted geogrid reinforcement for railroad and soft ground Polypropylene (PP) Geogrid specifications for Railways: Material Polypropylene (PP): Ultimate tensile Strength:20Kn/m (min) Material Polypropylene (PP): Ultimate tensile Strength:30Kn/m (min) Square hole pp mesh geogrids 30mm square hole PP Geogrid, mesh thickness app. 3 mm Packaging 4mtr x 200mtr on roll Colour: Black Bi-Axial Geogrid material for our project in Oman. Material: Bi-axial oriented PP geo-grid Tensile Strength: 20 kN/m Mesh size: 40x40 mm Width: 2 m Thickness: 1 mm Multi axial PP Geogrid Rolls Tensile strength: 15-50kN/m Width: 2/3.95/5.9m Length:50/100m Package: Rolls

Improved MgO Board 1. Introduction With new materials and technologies, Improved Kam Chung magnesium oxide board has better performance and avoids the defects of traditional MgO board. We use an alkali-resisting glass fiber net to increase product strength, and new technologies to prevent the “crying” phenomenon. In that case, our products can be used in humid area and no need to worry about quality problem. 2. Application Kam Chung Magnesia board is light in weight, resistant to fire, high in strength, good against moisture, thus suitable for a wide range of general building uses, such as ceiling, wall board and flooring for residential complex, hospital, school, workshop, warehouse, stadium or even furniture and billboard. 3. Specifications Size (mm) 2440*1220 Thickness (mm) 3 – 20 Moisture content (%) ≤8 Density (g/cm3) 0.6-1.4 Wet Expansion Rate(%) 0.6 Thermal Conductivity (W/m•K) ≤0.30 Bending Strength(MPa) ≥10 Shock Resistance (Kj/㎡) 2 Dry Shrinkage Rate (%) 0.3 Nail-holding Ability (N/mm) ≥25 Content of Chloridion (%) ≤10 Non- combustibility GB 8624-2006 Class A Impermeability No water drops on the other side 4. Advantages (1). Durable (2). Fire rated (3). Insect-free (4). Waterproof (5). Light weight (6). Energy efficient (7). Impact resistant (8). Easy installation (9). Environment -friendly 5. Installation Processes for Suspended Floor (1).Draw lines on walls and paint anti-rust paint on channels. (2).Make channels on walls and fasten steel channels by following procedures. A. Make a 2cm deep channel at horizontal line of walls and get rid of the putty until you see the steels inside. B. Clean up putty and dust, and weld keels directly to the steels inside walls so as to make the whole floor system strong. C. The width of channels should be same as that of channel steels. Sink the channel steels into the channels and fasten them by screws and then weld them together. The whole system would be integrated with walls by that. D. It is better to apply more screws to fasten channel steels with wall steels. (3). installation of I-beam Because that we use both size 12 I-beams and channel steels, we need to cut both ends of I-beams so as to fix them into channel steels and weld them together. Distance between each I-channel is about 60cm. (4). Weld angle steels and sub channels and paint the whole system with waterproof paint. Distance between sub channels is 60cm. (5). Welding slags must be cleaned up and welding joints be polished before installation of MgO boards. Boards should be vertically parallel to main beam. Any edge of boards must not be suspended and distance between boards can be 3- 5mm. Joint points of boards must be on the center of beams. (6). Length of self-tapping nails can be 55-60mm (subject to thickness of boards and beams). First drill holes and then nail them in. Hole size must be bigger than that of nail head, and nail head must be sunk into a board. Nailing sequence is from center to sides. Distance between board edges and nails close to edges is about 20mm. Distance between nails around board center is about 600mm, and that between nails near board edges is about 300mm. Nailing should be done when the general layout is finished. (7). During installation, operator should leave 3-5mm gap between boards and walls (less distance for wooden floor). Gaps can be covered by silicone sealant or elastic putty.

Minimum Order: 666

Sandwich Panel 1. Introduction Kam Chung sandwich panel is a new building material composed of calcium silicate panel, Portland cement and EPS foam. Compared with traditional brick wall, it is light in weight and can save a lot of construction space. Besides, it is waterproof, soundproof, weatherproof and fire-rated, which makes it versatile in applications. 2. Application Kam Chung sandwich panel could be used as interior partition wall for apartment, office, factory, residential complex, shopping mall, KTV center, refrigerated storage etc. It’s excellent for buildings with special requirements on sound and temperature. Also its advantages of light weight and weather resistant make it a good exterior wall for warehouse, bungalow, temporary house, labor house, security guard room and so on. 3. Specifications Size (mm) 2440*610, or on request Thickness (mm) 50 75 100 125 Bend Resistance Load (multiple of panel self weight) ≥1.5 ≥3 ≥4 ≥5.5 Fire Endurance (Hour) ≥1 ≥2.5 ≥4 ≥4.5 Sound Reduction Index (dB) ≥35 ≥37 ≥42 ≥47 Moisture content (%) ≤10 ≤10 ≤8 ≤8 Hanging Load (N) ≥1000 Shock Resistance (times) ≥5 Dry Shrinkage Rate (mm/m) ≤0.5 Thermal Conductivity (W/m•K） ≤0.2 Asbestos & Toxic Materials None Non- combustibility GB 8624-2006 Class A Water Penetration No drop of water on the other side 4. Advantages (1). Fireproof (2). Insect-free (3). Waterproof (4). Soundproof (5). Light weight (6). Long lifespan (7). Space saving (8). Energy-saving (9). Easy installation (10). Environment-friendly 5. Installation Processes for Sandwich Panel (1). Draw lines on wall and floor according to drawing plan. (2). Cut Kam Chung sandwich panels into suitable sizes with a circular saw. (3). Mix cement and sand (ratio 1:2) and make it starchy. Then wet panels’ sides which are to be connected and put cement mixture on them. (4). Fix the panels according to drawn lines and keep them upright. Use a jimmy to move the panels from bottom and make them tightly connected to each other. (5). Push panels so as to again make sure they are tightly combined and squeeze out the cement mixture from connecting joints. Then use wedges to fix them. (6). Use a 2-meter long guiding rule to check the flatness and perpendicularity of panels. Adjust them with a jimmy and fix them with wedges and steel bars. (7). All joints between two boards must be reinforced with steel bars in size 6*200mm at 45 degree angle. (8). After adjusting panel connections, use 30*30mm wedges to fix them. Then use a drill to make holes through panels and floor at a 45 degree angle. Hammer 6*200mm steel bars into the holes to tightly fasten panels on the ground. (9). When adjusting and fixing are finished, fill all joints with cement mixture, including those connected with ceiling and floor. Pull out the wedges and stuff the holes with cement mixture. (10). If embedded channels are needed, use a circular blade to cut on panels and cover them with cement mixture once embedding is finished. (11). Last step is to cover the walls if necessary. Wallpaper can be pasted, wood plate nailed and ceramic tiles directly stuck on them with cement mixture. Door and windows could be fixed right on them as well.

Minimum Order: 666

We specialized in the research,development and production of wood veneer material and product.All of our products comply with international quality standards and are greatly appreciated in a variety of different market throughout the world. If you are interested in any of our products or would like to discuss a custom order,pleas feel free to contact us.We are looking forward to forming successful business relationships with new clients around the world in the near future. Wrapping veneer:largesize:2x8'.Norma size:width:15cm+Length :panel length+ naturalsize:width 10cm+,joint length or natural length.paper or nonwoven back.main species:ash,beech,maple,oak,walnut,teak,sapele,aca , cia,etc flooring veneer size: 450*75/90*2/3 ABC 600*90/125*2/3 ABC 900*150*2/3 ABC 1200*165/150*3 ABC 1200*190*2 ABC 1200*190*3 ABCD 1900*165*2/3 ABC Edge band veneer size:t:0.2-3mm,width:10-150mm.Roll l:50-300m.Conductive tape available. PSAVeneer for door and curved plywood:strong and flexible big size 2'x8'.customed size available.

We specialized in the research,development and production of wood veneer material and product.All of our products comply with international quality standards and are greatly appreciated in a variety of different market throughout the world. If you are interested in any of our products or would like to discuss a custom order,pleas feel free to contact us.We are looking forward to forming successful business relationships with new clients around the world in the near future. Wrapping veneer:largesize:2x8'.Norma size:width:15cm+Length :panel length+ naturalsize:width 10cm+,joint length or natural length.paper or nonwoven back.main species:ash,beech,maple,oak,walnut,teak,sapele,aca , cia,etc flooring veneer size: 450*75/90*2/3 ABC 600*90/125*2/3 ABC 900*150*2/3 ABC 1200*165/150*3 ABC 1200*190*2 ABC 1200*190*3 ABCD 1900*165*2/3 ABC Edge band veneer size:t:0.2-3mm,width:10-150mm.Roll l:50-300m.Conductive tape available. PSAVeneer for door and curved plywood:strong and flexible big size 2'x8'.customed size available.

We specialized in the research,development and production of wood veneer material and product.All of our products comply with international quality standards and are greatly appreciated in a variety of different market throughout the world. If you are interested in any of our products or would like to discuss a custom order,pleas feel free to contact us.We are looking forward to forming successful business relationships with new clients around the world in the near future. Wrapping veneer:largesize:2x8'.Norma size:width:15cm+Length :panel length+ naturalsize:width 10cm+,joint length or natural length.paper or nonwoven back.main species:ash,beech,maple,oak,walnut,teak,sapele,aca , cia,etc flooring veneer size: 450*75/90*2/3 ABC 600*90/125*2/3 ABC 900*150*2/3 ABC 1200*165/150*3 ABC 1200*190*2 ABC 1200*190*3 ABCD 1900*165*2/3 ABC Edge band veneer size:t:0.2-3mm,width:10-150mm.Roll l:50-300m.Conductive tape available. PSAVeneer for door and curved plywood:strong and flexible big size 2'x8'.customed size available.

Minimum Order: 500

The threads of fully threaded studs are distributed on the surface of the whole bolt, which is used to connect parts with large thicknesses and compact structures. Or it is not suitable to use bolted connection due to frequent disassembly. Full thread stud standard are mainly used in the connection between machines. All items are produced in strict accordance with industry standards or client- specific requirements.     As an industrial fastener manufacturer, we provide stud bolt fully threaded, stud full thread, connecting stud, guide stud, full threaded stud, long stud, locating studs, threaded bars, etc. For more information, please feel free to contact us!

Standard Export Carton: 24 pieces per carton Carton Dimensions: 42.5*29*25.5cm Quantity of 20ft Container: 900 Quantity of 40HQ Container: 2090 Port:Guangzhou/Hongkong

Minimum Order: 1200

Hebei Suna Technology Co., Ltd. was founded in 2002，Our main products includes HPMC, HEMC, RDP, HEC, PVA, CMC, Inorganic Pigment, Titanium Dioxide, and so on. Please contact with me if you are interested in our products. My email is export03@cnsuna.com My Whatsapp is +86 18631102067

Minimum Order: 1 bags