Other Business Services

The asymmetric system only has a downlink rate of 10.3125 Gbit/s, while the uplink rate is still 1.25 Gbit/s. As the first mature next-generation PON technology, 10G EPON technology is in line with network development trends. It has the advantages of large bandwidth, large optical splitting ratio, compatible networking with EPON, unified network management, and smooth upgrade. 10GEPON and EPON are in the same line. Use the existing network to directly increase the speed by 10 times, and perfectly match the bandwidth planning of the telecom operator, support the realization of the telecom operator's mid-and long-term planning goals, and support the continuous expansion of the operator in IDC business, government and enterprise customer business, and family customers. Specifications of 10G ASYMMETRIC EPON P/N Product Description Data Sheet Data Rate(Gbit/s) TX RX TX_Min(dBm) TX_Max(dBm) RX_Min(dBm) RX_Max(dBm) Power Consumption Reach Temperature(degC) PES96-BC5423-20 10GEPON OLT PR30 SFP+ √ TX 10.3125Gbps/ Burst Mode RX10.3125Gbps EML 1577nm 1270nm APD-TIA 1575nm 1580nm 1260nm 1280nm / 20km 0 to +70°C TX 10.3125Gbps/ Burst Mode RX1.25Gbps EML 1577nm 1310nm APD-TIA 1575nm 1580nm 1260nm 1360nm TX 1.25Gbps/ Burst Mode RX1.25Gbps DFB 1490nm 1310nm APD-TIA 1480nm 1500nm 1260nm 1360nm PEX96-BC5423-30 10GEPON OLT PR40 XFP √ TX 10.3125Gbps/ Burst Mode RX10.3125Gbps EML 1577nm 1270nm APD-TIA 1575nm 1580nm 1260nm 1280nm / 30km 0 to +70°C TX 10.3125Gbps/ Burst Mode RX1.25Gbps EML 1577nm 1310nm APD-TIA 1575nm 1580nm 1260nm 1360nm TX 1.25Gbps/ Burst Mode RX1.25Gbps DFB 1490nm 1310nm APD-TIA 1480nm 1500nm 1260nm 1360nm What is 10g EPON(GEPON) ONU? EPON refers to an optical fiber access system. The ONU is the terminal device of the system, which can be used to connect to computers of home users and devices of industrial users. Two functions of our 10g EPON ONU: selectively receive the broadcast sent by OLT; collect and cache the Ethernet data that needs to be sent, and send the cached data to the OLT terminal according to the allocated sending window; effectively improve the uplink bandwidth utilization rate of the whole system, and configure the channel bandwidth according to the network application environment and the characteristics of applicable services; can carry as many end users as possible without affecting the communication efficiency and quality, improving the network utilization rate and reducing the user cost.    What is 10g EPON(GEPON) OLT ? EPON (Ethernet Passive Optical Network), has the characteristic of saving optical resources and is transparent to network protocols. EPON uses a single optical fiber to connect the OLT, and then the OLT connects the ONU. The 10g EPON OLT device is an important local device. It can be connected to the switch at the front end by using internet fibre 10g epon cables and connected to the optical splitter at the client end by using a single optical fiber. Fibre techno 10g epon can realize the control and management of the client device. Like the ONU equipment, it is also a photoelectric integrated equipment. EPON vs. GPON vs. 10G-EPON EPON is a kind of PON network. The EPON network consists of OLT, ODN, and ONU.  The main features are point-to-multipoint, passive line, simple and clear network layer, providing comprehensive access to voice, broadband, CATV, etc. The EPON system uses upstream and downstream symmetric transmission with a nominal rate of 1.25 GB. The STANDARD of EPON is IEEE 802.3AH, which is based on gigabit Ethernet technology and realizes PON point-to-multipoint transmission through point-to-multipoint control protocol (MPCP) on MAC layer. The protocol is simple to implement, but the OAM capability is relatively weak. While the STANDARD of GPON is ITU-T G.984 series, which follows the standard protocol framework of APON and adds GEM, a new frame encapsulation method of TC layer. It has strict regulations on QoS and OAM, and has a strong capacity to carry TDM services and relatively complex protocol.  GPON has a high transmission rate and shunt ratio, providing TDM services with high timing accuracy. As for the internet fibre techno free 10G-EPON, it is developed on the basis of EPON, and the two are basically the same in technical principle, but the free 10G-EPON has a stronger carrying capacity. Primus lT is a professional optical transceiver factory, we provide network transceiver, optical transceiver wholesale, 5g fronthaul, etc. Want to know more? Contact us.

Minimum Order: 1 bags

25G SFP28 BIDI/LWDM/CWDM/DWDM transceivers for 5G front haul are available now.Browse our broad range of products designed to help you enable your communication networks. Optical Transceiver Types FTTHThe notable technical feature of FTTH is that it not only provides greater bandwidth, but also enhances the transparency of the network to data formats, rates, wavelengths, and protocols, relaxes the requirements for environmental conditions and power supply, and simplifies maintenance and installation. Optical modules are optical transceivers used for high-speed data transmission and are used anywhere larger amounts of data needs to be sent and received. Assist 5G network construction and realize global interconnection. DAC (Direct Attach Cable) is a non-replaceable port, and the module head and copper cable cannot be separated. In data centers, copper cables are commonly used to connect servers to storage area networks. For a long time, Primus It has been working to solve the bottleneck problem of network bandwidth optical modules through continuous technological innovation, adheres to concentrate superior forces constantly improve the industrial layout, and enhance the company's core competitiveness and overall strength, creating the perfect solution. Primus lT is a professional optical transceiver factory, we provide fiber optic module, optical transceiver wholesale, optical transceiver pdf, optical transceiver schematic, multimode fiber module, qsfp+, etc. Want to know optical transceiver definition or more? Contact us.

Minimum Order: 1 bags

Wireless Interconnect is at the heart of most modern technology, and the need for strong, secure wireless performance is only growing with IoT and the popularity of smart devices. Module systems must offer reliable performance and support the latest protocols to provide easy internet access for end consumers. These modules can offer a variety of inputs, including SD and USB capability, and new designs are expected to improve efficiency and system sensitivity in small sizes. Our broad product portfolio includes 25G SFP28 and 50G QSFP28 to support 5G development. Together they compose a comprehensive suite of solutions capable of delivering highly efficient power in small package sizes. Our innovative, cost-effective solutions help simplify design and provide high levels of integration so wireless access is simple and secure, and customers can stay connected. Primus IT's innovative, efficient optical transceivers offerings help enable the best wireless Interconnect. SFP interconnect cable overview The GBIC module is divided into two categories: one is the ordinary cascade GBIC module, which realizes the common connection with other switches; the other is the stack special GBIC module, which realizes the redundant connection with other switches.  GBIC is basically replaced by SFP for the following reasons:  SFP (Small Form-factor Pluggables) can be simply understood as an upgraded version of GBIC. SFP module (half the size of the GBIC module, you can configure more than twice the number of ports on the same panel. Because the function of SFP module is basically the same as that of GBIC, it is also called miniaturized GBIC (Mini-GBIC) by some switch manufacturers.  The SFP module further reduces the size and power consumption by placing CDR and electric dispersion compensation on the outside of the module. Used in optical communication applications in telecommunications and data communications. SFP connects the motherboard and fiber or UTP cables of network devices such as switches, routers, and so on. SFP is an industrial specification supported by some optical fiber device providers.  SFP supports SONET, Gigabit Ethernet, fibre Channel (Fiber Channel), and other communication standards. This standard extends to SFP+, to support 10.0 Gbit/s transmission rates, including 8 gigabit fibre Channel and 10GbE. The optical fiber and copper core version of the SFP+ module is introduced. Compared with the Xenpak, X2 or XFP version of the module, the SFP+ module leaves part of the circuit implemented on the motherboard rather than in the module. Applications of sfp interconnect Sfp interconnect cable is the main type of high-speed IO interface interconnection system that has long been used to connect servers, storage, switches, video and communication systems. The main market segment implementations include cloud data centers, enterprise data centers, HPC (High performance Computing) labs, camera surveillance systems, and so on.  FP interconnection system is developed from HSSDC (High Speed Serial data Connector). HSSDC-1 and HSSDC-2 break with the traditional use of two-piece metal connector contact systems because plug connectors use PCB with gold- plated pads to match the metal contacts of edge socket connectors. Compared with the previous very large, heavy and wide parallel IO interface connectors and cables, modern sfp interconnect cable is more convenient and efficient. SFP is also used for 2.5, 5, and 8 Gbps data rate applications, including InfiniBand standard single-channel links. Primus lT is a professional optical transceiver manufacturers, we provide optical transceiver module, optical transceivers, dci, etc. Want to know more? Contact us.

Minimum Order: 1 bags

Optical modules are optical transceivers used for high-speed data transmission and are used anywhere larger amounts of data needs to be sent and received. From data centres to telecom, short or long-range, optical modules are ideal for large, efficient data transfers. Optical modules can range in size and bandwidth, with the newest generation supporting up to 400GB/s. Although these transceivers move large amounts of data, they are powerful and lightweight. Our monolithic design allows for high power in an ultra-small package with ultra-low power loss. This means the layout and thermal design are simple and the device provides maximum efficiency, which is critical to any optical module design. Primus IT offers a broad product portfolio, covering optical modules ranging from 1G to 100G, as well as the CWDM and DWDM families. Primus IT offers high-quality modules to meet the demand of datacom and fibertech telecom networks and to enable the next generation of optical transceivers. Transmission network telecom The telecommunications networks used to transmit data used many different protocols. Today, almost all data networks are based on IP. The data in these networks is divided into separate packets and marked with destination and source addresses. In principle, each packet can find different routes through the network and arrive at its destination at different times.Optical modules are optical transceivers used for high-speed data transmission and are used anywherelarger amounts of data needs to be sent and received.From data centres to telecom, short or long-range,optical modules are ideal for large, efficient data transfers. Telecom Network Companies Our monolithic design allows for high power in an ultra-small package with ultra-low power loss. Thismeans the layout and thermal design are simple and the device provides maximum efficiency, which iscritical to any optical module design.Primus lT offers a broad product portfolio, covering optical modulesranging from 1G to 100G, as well as the CWDM and DWDM families. Primus IT offers high-quality modules to meet the demand of datacom and telecom networks and toenable the next generation of optical transceivers. Telecom network operation The downstream optical module is mainly used in the three major scenarios of telecommunications bearer network, access network, data center and Ethernet. The telecommunications bearer network and access network belong to the telecommunications operation market. Among them, wavelength division multiplexing (xWDM) optical modules are mainly used for medium and long- distance telecommunications bearer networks, and optical interconnects are mainly used for backbone networks and long-distance core networks. Capacity transmission; and the access network market is the "last mile" from operators to users, including fiber-to-the-home passive optical networks (FTTH PON, PON optical modules currently have a maximum transmission rate of 10Gbs), wireless fronthaul (5G optical modules, The current maximum transmission rate is 25Gbs) and other application scenarios. What is telecom network infrastructure The telecommunication network is composed of three parts: core network, access network (AN) and customer premises network (CPN). The core network and access network belong to the public telecommunication network, CPN is a user-owned communication network, and traditional CPN is a single user. One side of the access network is the core network, which is mainly composed of various business networks, and the other side is the user. The access network serves as a link between the previous and the next, and provides the services of the core network to users through the access network. The access network is a transparent transmission system that does not provide services by itself. User terminals cooperate with the core network to provide various services. Fundamentals of telecommunications and networking for it A telecommunication network is a system that organically connects various telecommunication points and telecommunication circuits. It is composed of three parts: terminal equipment, switching equipment and transmission equipment. The first two constitute telecommunication points; transmission equipment constitutes telecommunication circuits. 1. According to different business types and communication methods, it can be divided into telephone communication network, telegraph communication network, data communication network, user telegraph communication network and fax communication network. 2. According to different communication ranges, it can be divided into international telecommunication networks, domestic telecommunication networks, long-distance telecommunication networks, intra-city telecommunication networks and rural telecommunication networks. 3. In terms of the nature of use, there are private telecommunication networks and public telecommunication networks. The private telecommunications network is only available to certain professional users, such as the private telecommunications network of railway, military and other departments; the public telecommunications network can be used by ordinary citizens. 4. From the way of signal transmission, it can be divided into analog communication network and digital communication network. The relationship between data communication and telecommunication Data communication is a new communication method produced by the combination of communication technology and computer technology. To transmit information between the two places, there must be a transmission channel. According to the different transmission media, there are wired data communications and wireless data communications. But they all connect the data terminal and the computer through the transmission channel, so that the data terminals in different locations can share software, hardware, and information resources. Telecommunications is now the main form of communication, and its main task is to use wired electricity, radio, light, etc. to transmit information such as symbols, text, images, and language. Since telecommunications use electric waves to transmit information, terrain obstacles, solar activity, etc., sometimes affect the quality of communication. Primus lT is a professional optical transceiver manufacturers, we provide optical transceiver module, optical transceivers, etc. Want to know signaling in telecommunication networks or more? Contact us.

Minimum Order: 1 bags

Product characteristics 1. Metal dome Shape: Four-Leg Metal domes, Triangle metal domes, Round metal domes 2. Metal dome force: 180g, 220g, 240g, 350g, 400g, 3. Metal dome with good tactile 4. Metal dome materials: Stainless, Nickel, Golden Komkey is a professioanl membrane switches supplier and metal dome switch suppliers, we provide custom membrane keypad, cable loom assembly and etc. Want to know more? Contact us.

Minimum Order: 100

What is Cable Harness A cable and wire harness also referred to as a wire harness, wiring assembly, cable assembly or wiring loom, is an assembly of electrical cables or wires which transmit signals or electrical power. The cables are bonded together with a durable material such as vinyl, rubber, electrical tape, conduit, a weave of extruded string, or a combination thereof. Commonly used in automobiles, car, and construction machinery, cable harnesses has several advantages over loose wires and cables. Application and environment are the two major factors that determine the types of the wire harness. Based on these two factors, there are 3 types of harness cable assembly. Open Bundle: The cable and harness assembly is attached to the connectors and lugs and are coupled in bundles with various breakouts using plastic tie wraps or waxed lacing twine. Closed Bundle: Wires are bundled with a covering, such as pulled-on braided tubing, braided-on Nomex or nylon, or in some cases, metal braid. Waterproof Harnesses: The junctions between the legs and backshells of the connectors are molded with a material such as urethane or rubber compounds. Specifications of the Cable Harness Material Wires can be UL/CSA,CE, VDE,SAA,CB etc Size Range Thousands of different connectors available Color Black or OEM color Voltage rating: 30V AC/DC Withstanding voltage: 200V AC/minute Temperature range: -25 -85°C Insulation resistance: ≥100MΩ Design ability     We can supply sample, OEM&ODM is welcome (Design, Engineering, Photographing, Sample, Production) Simple Crimped Cable Assembly: 0.8mm pitch, 1.0mm pitch, 1.25mm pitch, etc. Cable length: customized Sample Sample can be provided for evaluating MOQ Small order can be accepted Delivery Time Enough stock and strong production capacity ensure timely delivery Packaging 100/200/300/500/1000PCS per bag with label, export standard carton Application Industrial and Car audio harness Components of Cable Harness Wire The role of the wire is to carry current to convey signals and provide power. It itself contains internal copper wires and external insulating materials. Commonly used specifications have a nominal cross-sectional area of 0.3, 0.5, 0.85, 1.25, 0.3, 0.5, 0.8, etc. Wires, each of which has a current value that allows the load, and reasonable use of electrical equipment for different powers, is the basis for a qualified harness. With the increase of the functions of automobiles, the widespread use of electronic control technology, more and more electrical components, more and more wires, the thicker and heavier the wiring loom harness assembly becomes. In the future, the use of wires will be reduced, and modern cars have introduced CAN bus configurations using multiplex systems. Compared with the traditional point-to-point configuration of the wiring harness, the CAN bus greatly reduces the number of wires and connectors, making the cable and wire harness lighter and not limited. Connector and Terminal After the terminal and the electric wire assembly are crimped according to the standard, they are locked in the slot of the connector, and the male and female connectors are butted to meet the loop between the harness and the harness to the terminal. If it is arranged in the high humidity environment of the engine compartment, according to National regulations require that waterproof plugs be added. Exterior Parts and Other Components The exterior parts include a bellows, a polyethylene tube, a polyethylene cloth, a sheath, a sponge, a tape, a wire fastening harness bracket, etc., in order to place the wire to wear and break. Meet the temperature and humidity requirements of different positions of the body. Generally, corrugated pipe, polyethylene pipe, polyethylene cloth, hard pipe, and sheath are used to prevent the wire from being worn and broken. The wire is wrapped with thin- walled and thick-walled tape, and the wire harness is fixed at a suitable position in the vehicle body by using clips of different shapes. The purpose of the rubber ring is to prevent the wire cable harness from being scratched when it passes through the gold hole. Komkey is a professioanl membrane switches supplier and wiring loom suppliers, we provide custom membrane keypad, cable loom assembly, wiring looms and harnesses, custom wiring loom and etc. Want to know more? Contact us.

Minimum Order: 100

In the membrane switch industry have to spend a lot of it, the home appliance is no exception. Household appliances go into the family brought back to the people's quality of life is very convenient, in the washing machine industry in a safe, durable membrane switch keypad is particularly important year in the leakage caused by household appliances, electric shock phenomenon often occurs, membrane switch has good waterproof, dust, oil, anti-corrosion of harmful gases, stable and reliable performance, lightweight, small size, long life, easy Assembled, the panel can be washed with characters from injury, rich color, nice advantages, the main types of membrane switch is a membrane switch panel of a rigid or flexible printed circuit board as a base, there is no feeling or touch keys mounted, then covered with a decorative printed pattern of colored plastic (polycarbonate PC, PET polyester etc.) constituting the film panel, set the switching function and decorative functions as one of the electronic component, is a new interactive interface, connection switching circuit which may be employed with the machine or plug welding complete manner, Therefore, the washing machine also spend a membrane switch. Membrane switch of the washing machine can make sure: (1) Security Since it is inevitable that the washing machine operator might have got wet, so if a good old-fashioned switch is not waterproof device may cause electric shock phenomenon, and membrane switch at this point 100% waterproof design, you can even switch directly to water washout on this membrane switch also used in many other industries. (2) Durability Responsible for the switch on the washing machine washing machine washing, dewatering, drainage and many other functions, now rapid development of technology, a lot of washing machines with a computer chip control, then repeatedly touched the button will have long aging, Dongguan membrane keypad membrane switch factory in principle durability for repeated use up to tens of thousands of times to hundreds of thousands of times, thousands of times a normal switch on the side of ordinary wear and tear on the damage, because the membrane switch design makes the switch to become the industry leader. Membrane switches can also be used in other household appliances, for instance, rice cookers. Microwave membrane switch also can be easily seen. Komkey is a professioanl graphic overlay manufacturers, we provide custom membrane keypad, pcb membrane switch, membrane button panel and etc. Want to know more? Contact us.

Minimum Order: 100

PCB Membrane Keypad in Electronics Electronic membrane switch technology in the electronics industry to play a very important role, but it is limited to an important step in the article certain components, and not complete the entire process of processing components, although it is improved in electronic products exterior decoration made contributions but did not get rid of passive position attached to the product. However, it is the touch membrane switch that combines the effect of screen printing in the electronics industry products that are assumed and independent electronic products. Membrane switch is not only a decorative effect on the appearance of the instrument panel, and a more complete functional role actuating element, the decorative and functional in one set. Membrane switch occurs, is the inevitable outcome of the development of screen printing technology, it is not only from the screen printing membrane switch technologies but also to promote the development of high-tech areas of printing technology. Tactile membrane switch in the control system of electronic products, some of the switches not only bulky, single function, and the appearance of the type commercially available is limited, it is difficult to meet the needs of electronic product development of the multi-function, miniaturization, intensive and intelligence. Screen printing technique using separate products processed - membrane switch emerged as the fourth generation of the switching element to the development of the electronics industry to provide timely assistance. PCB membrane switch occurs, favored by the electronics industry, there has been a time such as membrane switches, touch switches, touch keys, and other named electronic panel. Referred to as a dome switch or membrane switch keyboard, which is based on the characteristics of the named material. It is usually sealed by the entire multilayer film structure of three or combination, set buttons, switches, functional marker panel, the reading on the display window, the light transparent window, the connection switch, the switch circuit lead, and a conventional panel It is marked letters, symbols, decorative content as a whole, thereby constituting the electronic cartridge handling system. Komkey is a professioanl membrane switches supplier, we provide custom membrane keypad, pcb membrane switch, membrane button panel and etc. Want to know more? Contact us.

Minimum Order: 100

A flat membrane switch or more precisely a standard membrane switch assembly is comprised of several flexible layers that make up a complete switch package. This assembly can have as few as one active area (key or button) to several dozen active areas. A custom membrane panel switch is an interface between man and machine, which enables an operator to communicate with equipment, instrumentation, or machinery. Subsequently, this allows the operator to communicate with the device, issuing commands and/or performing other operations. The operator presses the membrane control panel when he or she wants to control the device. Construction of Membrane Switch Graphic Overlay – PET/PC is usually the overlay material of choice due to its fantastic chemical resistance and flex property. Komkey offers membrane switch customized design services such as digital printing, screen-printing, or apply both methods to ensure you get the right colors, textures and finish your membrane switch design requirements. Adhesive Overlay – This adhesive layer sticks the membrane switch overlay to the top circuit layer, and is usually an acrylic adhesive. The material is the same as the fourth layer. Only the thickness is maybe different according to the actual situation. Top Circuit Layer – The material of this layer is specific. It is a 0.1mm thickness thermostable PET film printed with conductive silver ink and also dielectric oil, which used for fastening metal domes. Circuit Spacer – This layer separates the top circuit from the bottom circuit so that the touch membrane remains normally break until the membrane switch keypad is pressed. The circuit spacer is a polyester spacer with adhesive on both sides. Lower Circuit Layer – This layer is a 0.1mm-0.25mm thickness thermostable PET film printed with conductive silver ink and also dielectric oil. This layer terminates as a flexible tail that serves as an interconnector to controller PCBs or other IC. Rear Adhesive – This adhesive layer bonds the entire membrane switch to the product surface, housing, or to a rigid support panel. Komkey, one of the membrane switch keypad suppliers, can use the proper adhesive type and thickness to bond your membrane switch to your equipment. What Kinds of Membrane Switch Are You Looking for? Illuminated Membrane Switch with 7 Segment Display Tactile Membrane Keyboard with Aluminium Plate Type Custom Membrane Keypad with Colors Printing Type FPC Custom Membrane Switch Keyboard Membrane Panel with Half-Stone Printing Type Membrane Switch Panel with Label Strip Insert Illuminated LED Membrane Switch with LED Insert Custom Waterproof Membrane Switch with LGF Construction Tactile Membrane Switch with Metal Dome Membrane Switch with PCB Support Membrane Push Button Panel with Silicone Keypad Type Membrane Switch with Touch Panel Insert Membrane Switch Specification Mechanical Properties: Life Expectancy Flat type ≥ 5 million times, Tactile type ≥ 1 million times Operation Force Flat Type 57-284g ,Tactile Type 170-397g Dome Rebound Time ≤6ms Tail Bending Performance ≤180° Switch Stroke Flat 0.1~0.5mm,Tactile 0.6~1.5mm Vibration 20G's max. Thickness 0.7~1.5 mm Electrical Properties: Rated Voltage ≤50V DC Rated Current ≤ 100mA Operating Power ≤1W Insulation Resistance ≥100MΩ (250V DC) Loop Resistance 10Ω~2kΩ (Depending on the design) Contact Resistance 0.5 ~ 5Ω (Depending on wire length and the materials) Wire Lead Resistance <1Ω/cm Base Material Voltage Withstand 1500V DC Environmental Properties: Operation Temperature -40°C to +80°C (-40°to 176°F) Storage Temperature -40°C to +85°C (-40°to 185°F) Atmospheric Pressure 86 ~ 106 kPa Humidity +40°C, 90%~95%RH for 240 Hours Why Choose Our Membrane Switch? Our Membrane Switch Pad Advantages Beautiful appearance, Variety color printing. Small size, light in weight, good tactility, Long life span. moisture-proof, dustproof, waterproof, anti-corrosion, and erosion of harmful gases proof. Easy to operate, intuitive, safe and reliable Cost-effective, convenient installation Komkey is one of the reliable membrane keyboard suppliers offering custom membrane keypad design service Customized specification is available, the Smaller volume can be accepted. Customized logo/Brand/Contact way can be printed in the overlay for advertisement. Komkey is a professioanl graphic overlay manufacturers, we provide custom membrane keypad, pcb membrane switch, membrane button panel and etc. Want to know more? Contact us.

Minimum Order: 100

What is Graphic overlay ? Graphic overlay is an interface layer which is made of polycarbonate or polyester with an adhesive backing. It can be applied to many industries including, Residential and commercial appliances Machinery control panels Medical equipment HVAC equipment Gas station pumps Automotive dashboards A functional membrane graphic overlay is designed for use with rubber keypads, membrane switches or as a touch screen panel interface for control panels. In these applications, the printed graphics and text are used to providing operational instructions or safety warnings and label overlay buttons and controls. However, with an aesthetic purpose, decorative membrane switches graphic overlays and panel overlays are printed with custom graphic panel, company logos or product information. They act as an intermediary between the user and the machine through functional descriptions, without conductive traces or circuitry. The membrane switch overlay or custom control panel overlay provides a variety of embossed keys, matte or glossy finishes, and a protective coated overlay to reduce the likelihood of fading. It also includes different material thicknesses from 0.125mm to 1mm to meet customers' specific applications. Materials for Graphic Keypad Overlays POLYCARBONATES GE(Matte materials) 8B35-0.125mm, 8B35-0.254mm, 8B35-0.375mm,8B35-0.5mm GE (Golssy materilas) 8010-0.125mm, 8010-0.254mm, 8010-0.375mm, 8010-0.5mm POLYESTERS Autotex (Textured) Like F150, F200 Autotex UV/XE Like, V150, V200, XE150, XE200 AutoFlex EBG/A (Glossy and Anti-glare), Like EBG130, EBG180, EBA130, EBA180. ADHESIVES 200 Series (467MP & 468MP) - 3M 300LSE Series (For Low Surface Energy Applications) - 3M DT8016，DT8126，DT8176 - (Nikto) Graphic Overlays for Any Industry Custom graphic smart overlays can improve the overall appearance and prevent moisture, dust, and debris from penetrating the electrical components such as switches or touch screens. Some of the common uses include: Residential and commercial appliances Machinery control panels Medical equipment HVAC equipment Gas station pumps Automotive dashboards Custom Graphic Overlay Capabilities Specializing in graphic design overlays as static components for membrane switches and rubber keypads and touch panel, we will help you design a customized graphic overlay which meets both functional and aesthetic needs. We can offer the following services: Digital overlay printing Prototyping In-house embossing Custom control panel overlay printing Laser & die-cutting Custom graphic overlays can be made in sizes from to 30" to 40". Additionally, in order to improve visibility in low light applications, backlighting can also be added to the overlay panels. We also offer special ultraviolet selective textures and ultraviolet hard coat treatments which can protect lens areas from chemicals and scratching. How to Design the Graphic Overlay? Sample: Provide drawings of graphic overlay prototypes that all dimensions and physical characteristics including colors or actual samples for copy are clearly shown. Colors: Identify the colors which you want your switch overlays to have by Pantone (PMS) RAL color number or a color sample. It is important to supply the exact standard for which our color match will be evaluated. Borders and Outlines: Avoid circles within circles, or outlines which are close to cutouts or outer edges because any misregistration will be visually accentuated. File Format: It's best to receive design files from the native software packages. (ie Adobe Illustrator, Corel Draw or PDF files) Background: Light text and dark backgrounds will show less wear and dirt and greater clarity. Try making the control panel overlay or the membrane overlay drawings clear. Text: Block lettering provides the most legible copy. Try to use common fonts. Positive letter strokes should be a minimum of .008'' and .012''for negative letter stroke. Komkey is a professioanl graphic overlay manufacturers, we provide custom membrane keypad, graphic overlay membrane, control panel overlay material and etc. Want to know more? Contact us.

Minimum Order: 100

Technical features: 1. Strong anti-counterfeiting reliability: Security thread anti-counterfeiting is the first anti-counterfeiting method for banknotes all over the world, and the reliability of its anti-counterfeiting is evident. 2. Easy to use: It is just a substitute for the original ordinary paper, making your product more unique, and invisibly enhancing the image of the company and the product; 3. Convenient detection: The security line anti-counterfeiting belongs to the "first-line anti-counterfeiting", without the aid of instruments, consumers know this technology through banknotes, and can distinguish the authenticity by themselves; 4. Beautiful and generous: It can be integrated with the packaging design according to customer needs, and the corporate logo text can be miniatured. The anti-counterfeiting security thread can be applied to product anti- counterfeiting labels, vouchers, product anti-counterfeiting certificates, tags, lotteries, bills, certificates, etc.

The anti-counterfeiting security thread was first used on banknotes and documents. Because of the convenient and quick identification method, it was quickly recognized by the industry and the market. Anti-counterfeiting security thread is also called anti-counterfeiting cable and skylight security thread. It is a special anti-counterfeiting thread embedded in a fixed paper base during the production process. Generally, the material of the anti- counterfeiting thread can be metal wire, pet anti-counterfeiting thread, fluorescent thread, etc. The shape of the line can be made to point, wave or zigzag, etc. The security thread has a particularly good anti-copy effect. The window-opening security thread is intermittently exposed on the paper surface. When copying with a copier, the exposed metal thread is copied into intermittent black lines, so it cannot be copied. According to understanding, the security thread anti-counterfeiting technology is an anti-counterfeiting technology trusted by many domestic enterprises. Because of its good anti-counterfeiting effect, this type of anti- counterfeiting technology is used in the currencies of many countries. Anti-fake bookbinding thread

The anti-counterfeiting security thread was first used on banknotes and documents. Because of the convenient and quick identification method, it was quickly recognized by the industry and the market. Anti-counterfeiting security thread is also called anti-counterfeiting cable and skylight security thread. It is a special anti-counterfeiting thread embedded in a fixed paper base during the production process. Generally, the material of the anti-counterfeiting thread can be metal wire, pet anti-counterfeiting thread, fluorescent thread, etc.

Quick Details Warranty 1 YEAR After-sale Service Online Technical Support, Return and Replacement Project Solution Capability total solution for projects Place of Origin Zhejiang, China Model Number YM-201 Feature Soap Dispenser/Spray Soap Dispenser Liquid Soap Dispenser Type Automatic Soap Dispenser Product name 360ML Electric Household Automatic Touchless Soap Dispenser Color White,Red, yellow, gray, black Installation Desktop/wall mounted Capacity 500ml Size 162x85x188mm Certificat CE, ROHS, FCC