Auto Parts & Tools

Part No.In-4P2854 Ex-319-9074 Pictures only for reference Price&order quantity could be negotiable

Minimum Order: 1000

Part No.104-7184 Pictures only for reference Price&order quantity could be negotiable

Minimum Order: 1000

Part No.153-7024/490-7200 Pictures only for reference Price&order quantity could be negotiable

Minimum Order: 1000

Rigging hardware comes in a huge range from snap hook, S hook, quick link, hitch pin,round ring, small pulley and so on. These hardware are used for connection the cable, rope, chain for protective fence, outdoor sport equipment, mountain-climbing equipment, diving equipment, lanyard accessories, hand bag accessories, etc. All these hardware are surface treated with zinc plating or use stainless steel material for oily free touch. For more information, click in for details or send inquiry. Types of sailboat rigging hardware 01 Zinc Plated Snap Hooks DIN5299 Known as spring hooks, the snap hooks are constructed with a spring snap to prevent the accidental unhooking of a rope, cord or other target line. It’s a widely used essential component in a broad ra... 02 Stainless Steel Snap Hooks The stainless steel snap hooks can be used for mountaineering, keychains, chain link buckles, safety buckles, load-bearing buckles, pet chain link buckles, etc.The surface of the stainless steel snap ... 03 Zinc Plated Quick Links Serving as a connection element between components and an assembly device for a fall protection system for connecting directly or indirectly to an anchor point, quick link is very essential components... 04 Zinc Plated S Hooks S hooks is designed for hanging purpose. If you have anything to hang, but can not directly attached, you can use this hook to help your job done. It is primarily used for hanging air hoses, electrica... 05 Stainless Steel S Hook S hook made by stainless steel are the same function as zinc plated S hook. The material of AISI304, AISI316 and AISI316L have super corrosion resistance. Thus, the stainless steel S hook are more use... 06 Zinc Plated Round Ring and D Ring Welded Round Ring and Dee Ring can be used to make a variety of straps, from tie-downs to horse harnesses. It can also work as anchor point or tie down hooking point by welded on a bracket. 07 Stainless Steel Round Ring and D Ring Welded round ring and D rings are made from grade 304 stainless steel and grade 316 stainless steel. If their application areas are marine and biogas, we recommend you choose grade 316 stainless steel... 08 Aluminium Carabiner Locking Clips Carabiner locking clips are designed with a metal loop with a spring-loaded gate used to quickly and reversibly connect components, most notably in safety- critical systems and widely used for lanyard.... 09 Small Pulley, Single Wheel And Double Wheel TITAN SUHE provides a wide range of small pulley. They are coming with eye type, swivel eye type, steel wheel, nylon wheel, single wheel and double wheel. 010 Stainless Steel Swivel, Jaw and Eye Stainless Steel Swivel can be matched with lifting chain, wire ropes or straight hooks. TITAN SUHE provides a wide range of stainless steel swivels including swivel eye and eye, swivel jaw and jaw, sw... Light Duty Rigging Hardware Type Snap Hooks For quick connection by simply push, it will automatically lock once release the load. We have five model snap hooks that made by zinc plated steel material or stainless steel material AISI304, AISI316 or AISI316L, or Aluminum material in different color. Snap Hook DIN5299, Form C- The most cost-effective model for general connection. Snap Hook DIN5299, Form A-Structured with eyelet which can be fixed to any lanyard such as scuba signal reel. Snap Hook DIN5299, Form D-Come with Screw which can keep the snap hook locked, avoid accidental open Snap Hook DIN5299 , Form E-Structured with both eyelet and screw for higher safety connection and easy fix. Snap Hook DIN5299, Form B-Straight Shaped Quick Link It has same function as snap hook for quick connection. Simple screw and unscrew the nut for open and lock. Made of zinc plated steel or corrosion resistant stainless steel material, this quick link can be used for general purpose and marine applications. We have straight shape quick link, wide jaw opening quick link, Delta Shaped quick link and pear shaped quick link. Size available from 3.5mm up to 16mm. S-hook Work as an intermediary, this hook can be used anywhere that you want to hang or connect anything. Round Ring&D Ring Made of zinc plated steel material and stainless steel material, these hardware can be connect with other hardware to make anchor point or decorative parts Small Pulley Constructed with fixed eye or swivel eye, these small pulley are for light duty lifting or used to simply change the load direction As one of the most professional rigging hardware manufacturers, we provide boat rigging hardware, chain hoist chain, steel wire rope, lifting tackles, etc. For more information, please feel free to contact us! There are many lifting equipment manufacturers, but we are one of the best choices for you.

Minimum Order: 1 bags

Hello, We Offer Swift MT760 BG/SBLC, FC MTN, Letter of Credit { LC }, MT103Etc. N/B: Provider's Bank move first. Let me know if you have any need for the above offers. Thanks Name: Jerry Osborne Email: osbornejerry53098@gmail.com Skype: osbornejerry123@outlook.com

DENSO Common Rail Control Valve Orifice Plate 295040-6120 for 1KD,2KD 23670 DENSO Common Rail Control Valve Orifice Plate 295040-6120 for 1KD,2KD 23670

Minimum Order: 1 bags

GenuineBOSCH New Diesel Common Rail Fuel Injector 0445110418, 0445110520, 504289548, 5801483286 Genuine New Diesel Common Rail Fuel Injector 0445110418, 0445110520, 504289548, 5801483286

Minimum Order: 1 bags

All our Allmax brake pads are used premium quality materials with excellent performance in high temperature and mixed of innovative, technology and quality. ALLMAX become the pioneer company of brake pad for commercial vehicles& construction machines in China. We have gained the trust of a huge clientele across the national as well as global market by providing them an excellent quality collection of products within the promised time. Our huge gamut of high quality products includes Commercial Vehicles Brake Pad, Construction Machinery Brake Pad. All these products are manufactured making use of superior quality raw materials that we purchased from very known, certified and highly authentic suppliers of the industry. All our products are superior, durable, and reliable, these are supplied on large scale and provided at cost effective price ranges.

Minimum Order: 10 long tons

Commercial Vehicle Brake Pad WVA 29087 Product Description ECE-R90 Certificate approved With warranty of 100000km-200000km OE supplier for 20 years Heat resistance of more than 600 degree centigrade Friendly to disc, no noise Produce own back plates to control quality step by step 20 days for one container to deliver

Minimum Order: 10 long tons

Aluminum battery tray lower box of battery pack is mainly made of steel and aluminium alloy. Aluminium alloy is favored by more and more automobile OEMs and battery tray manufacturers around the world because of low destiny of battery tray bracket and various forming processes, which can meet the requirements of electric vehicle lightweight. At present, the alloy battery tray has two process schemes: integral casting and aluminium profile welding. Friction stir welding has been widely used in universal battery tray manufacturing because of its non-melting, automation, intelligence, environment-friendly and integrated characteristics. As one of the friction stir welding companies, Cheeven provides quality custom battery trays and battery tray kit wholesale at great market prices! Cheeven is a professional die casting supplier, we provide ev battery tray fsw, battery tray welding, battery tray holder, battery tray kit, custom battery trays, extra large battery tray, tray battery, battery tray bracket, battery tray and hold down, battery tray mount, battery tray replacement, mounting battery under tray, angle iron battery tray, battery tray metal, chrome battery tray, metal battery tray, steel battery tray, aluminium casting parts, etc. For battery tray price and more information, please feel free to contact us!

Minimum Order: 1 bags

Quick Details CNC Machining or Not: CNC Machining Type: Broaching, DRILLING, Etching / Chemical Machining, Laser Machining, Milling, Other Machining Services, Turning, Wire EDM, Rapid Prototyping Material Capabilities: Aluminum, Brass, Bronze, Copper, Hardened Metals, Precious Metals, Stainless Steel, Steel Alloys Micro Machining or Not: Micro Machining Place of Origin: China Surface treatment: Customer's Request Service: Customized OEM CNC Machining Application: Industrial Equipment, Automation, Aerospace, Medical Equipment: 3/4/5 Axis Center Machining Drawing Format: 2D/ (PDF/CAD) 3D (IGES/STEP) Size: Customer's Drawings Tolerance: 0.01- +/-0.005mm Lead time: 14-21days Supply Ability: 800000 Piece/Pieces per Month

Minimum Order: 1 bags

Wire Harness Probe Test Pin CH200 for the Tests of Automotive Industry Harness probes are mainly used directly or for the tests of automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. The standard and requirements for them are high compared with other test probes. Harness probes can be divided into screw-thread harness probes, harness switch probes, non-screw-thread harness probes, position-limited harness probes and high-current harness probes, etc. The CH200 harness probe we will introduce here is 1.99 mm in diameter and 36 mm in total length. Its barrel is made of brass plated with gold and nickel. The plunger is made of gold-plated beryllium copper, which is softer but less magnetic than the alternative SK4. The spring inside is made of music wire plated with gold and nickel. This probe can withstand up to the current 3 Amps. Its typical maximum contact resistance is 50 milliohms. It is suggested the plunger be pressed at a distance of 4.6 mm at most when this probe works, although the plunger can move as far as 6.7 mm. Otherwise, the spring inside the barrel will probably be damaged under constant pressure. When the plunger is pressed at a distance of 4.6 mm, its loaded force is about 213 gf, namely 7.5 ounces or so. Furthermore, the force fluctuates in a range due to the tolerance. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms Full Stroke: 6.7 mm Rated Stroke: 4.6 mm Spring Force: 213±64 gf (7.5 oz) at load 4.6 mm Materials (plated) Barrel: Brass, Au on Ni Plated Plunger: BeCu, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated For more information, please check below catalog. Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Cable Harness Probe Pogo Pin CHZ200 for Electronic Test Harness probes are mainly used directly or for the tests of automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. The standard and requirements for them are high compared with other test probes. Harness probes can be divided into screw-thread harness probes, harness switch probes, non-screw-thread harness probes, position-limited harness probes and high-current harness probes, etc. The CHZ200 harness probe we will introduce here is 2.02 mm in diameter and 33 mm in total length. Its barrel is made of brass plated with gold and nickel. The plunger is made of gold-plated beryllium copper, which is softer but less magnetic than the alternative SK4. The spring inside is made of music wire plated with gold and nickel. This probe can withstand up to the current 3 Amps. Its typical maximum contact resistance is 50 milliohms. It is suggested the plunger be pressed at a distance of 2.67 mm at most when this probe works, although the plunger can move as far as 4 mm. Otherwise, the spring inside the barrel will probably be damaged under constant pressure. When the plunger is pressed at a distance of 2.67 mm, its loaded force is about 74 gf, namely 2.6 ounces or so. Furthermore, the force fluctuates in a range due to the tolerance. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms Full Stroke: 4 mm Rated Stroke: 2.67 mm Spring Force: 74±22 gf (2.6 oz) at load 2.67 mm Materials (plated) Barrel: Brass, Au on Ni Plated Plunger: BeCu, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated For more information, please check below catalog. Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

High-current Probe Pogo Pin P264 Series for Electronic Test Cable harness test probes are mainly used directly or for the tests of automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. Their standard and requirements are higher than other series of test probes. They can be divided into screw-thread harness test probes, cable harness switch probes, non-screw-thread harness test probes, position-limited harness test probes and cable harness high-current probes, etc. High-current probes can withstand high current and high temperature in the tests. They are mainly applied to the in-circuit test field of high temperature and high current environments. High-current probes manufactured by Centalic mainly include P203, P264, P265, P350 and P420, etc. There is a fixed schedule for mass production of P264-HP-7G(B). This probe can withstand the current up to 24 Amps. And its typical maximum contact resistance is 50 milliohms. The materials used for the construction of this high-current test probe are different for each component: The barrel is made of brass. Subsequently gold and nickel plated during the galvanic plating phase. The spring is made of gold plated music wire. The plunger is made of BeCu, then gold and nickel plated. For details, please check parameters in below table. Technical Specifications Recommended Current Rating: 24 amps, continuous Contact Resistance: 50 milliohms, max Full Stroke: 5.3 mm Rated Stroke: 3.5 mm Spring Force: 200 gf( 7 oz) at load 3.5 mm Materials (Plated) Contact Barrel: Brass, Au on Ni Plated Plunger: BeCu, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated For more information, please check below catalog. Company Information: Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100