Ceramics & Ceramic Fiber

Chemshun Ceramics lined pipe elbow are designed for extended service life in high wear pneumatic fly ash, bottom ash, bed ash and mill reject conveying applications. Ceramic steel composite pipe consist of single ceramic tubes sticked in steel pipe by epoxy resin adhesive glue, single-piece ceramic pipe design eliminates potential erosion and failure points caused by manual assembly of tiled ceramic fittings, thereby reducing maintenance and lower life-cycle cost. Chemshun ceramics not only supply ceramic tube but also manufacture full set of ceramic lined steel pipe with flange. .

Minimum Order: 1 bags

Ceramic Rubber compound lining plate is compounded by high alumina ceramics and excellent natural rubber through special process. The excellent damping performance of natural rubber greatly lowers the noise generated in the transportation, which fully settled a series of issues such as impact, abrasion and noise. Ceramic hex.tile, ceramic square tile, ceramic bricks are available from 10x10mm to 100x150 mm; thickness from 2 mm to 63 mm. more information , pls contact : office (at)chemshun (doc)com

Minimum Order: 1 bags

irconia Ceramic Ball Bead for Grinding Electronic Materials Chemshun TZP beads have high fracture toughness and nice impact resistant that causes no break under high speed impact The TZP beads have 30-50 times higher wear-resistance as glass beads, 5 times higher as Zirconium Silicate beads and 6-8 times higher as Al2O3 beads Because of the high density and excellent grinding efficiency of our TZP beads , they greatly apply to grinding and dispersing high viscosity materials Popular size: Ø0.1,Ø0.2,Ø0.4~0.8,Ø0.8~1.0,Ø1.0~Ø1.2,Ø , 1.2~Ø1.4,Ø0.4~Ø1.6,Ø1.6~Ø1.8,Ø1.8~Ø2, Ø , 2~Ø2.5

Minimum Order: 1 bags

Chemshun ceramics as 15 years abrasion resistant ceramics manufacturer , we can assist you in technical analysis of wear damage conveying pipeline and produce integrated ceramic lined pipe equipment according to customer's industrial environment.Chemshun also offer onsite installation service providing skilled technicians and examination. More products like alumina ceramic tile , ceramic balls, zta ceramic plate can be offered from Chemshun Ceramics manufacturer

Minimum Order: 1 bags

Alumina ceramic tube , bend and elbow have exceptional hardness and strength, resistance to wear and chemical attack , It is especially used as the ceramic pipe liner of the pipeline and can protect the steel pipe for excessive wear and extend the use life . This kind of ceramic tube is easy for installation and diameter can be varied from 10mm to 500mm .Shape can be straight tube ,bend tube or Y-piece .with the properties of smooth surface , no gap and good abrasion and impact resistant ability . The ceramic pipe bending are widely used in the pipework of conveying ore fines. Cement , coal and other big hard materials in cement , steel , chemical , mining milling , smelting , port, thermal power plant, Its easy installation could reduce the cost much and meanwhile prolong the use life of the delivery system . Pingxiang Chemshun Ceramics Co.,Ltd is 18 year's experience in the wear protection field, Chemshun produce the most effective cost performace wear resistance alumina ceramics and supply wear solutions for customers, to solve the customer's problem of: wear in bulk materials handling and help customers reduce the maintenance costs and downtime to prolong the equipment usage life and increase the factory performance..

Minimum Order: 1 bags

Refractory fiber cone is also called ceramic fiber tap out cone. The furnace tap out cone is mainly used for controlling the liquid metal flow. AdTech refractory tap out cone adopts high-aluminum fiber, forms by the vacuum suction automatic equipment molding process. Each cone has a flat surface. More importantly, it has the features of appropriate hardness and toughness, not fragile, not peeling. Ceramic fiber tap out cone is suitable for mechanical or manual plugging and removal operations. AdTech ceramic fiber tap out cones are used in aluminum furnaces, fixed furnaces and other aluminum outlets. It makes the casting process of aluminum alloys more convenient, safe, and reliable.

Minimum Order: 1 bags

Ladle shroud and float plate adopt SiO2 materials. They can adjust the flow of molten aluminum in the metal casting industry. The flow tubes and float plates have the advantages of light weight, high-temperature resistance, small thermal conductivity, and good thermal insulation performance. They are refractory and heat insulation materials, widely used in melting furnaces, and various industrial furnaces. AdTech company can also provide customers with a variety of products, such as silica-alumina fiber paper, plugs, thermal caps, ceramic foam filters and so on.

Minimum Order: 1 bags

The alumina porcelain rod is also called alumina ceramic stopper rod, control pins. And the ceramic fiber tundish nozzle is also called alumina ceramic tube. They are used in conjunction with each other for plate ingot casting. AdTech alumina rod and ceramic fiber tundish nozzle are made of high-silicon molten material. They have strong corrosion resistance, no pollution to metal solutions, and can be used multiple times. Alumina porcelain rod is used in conjunction with a downspout and metal level control system to the regulate flow of molten metal from the distribution launder into moulds for rolling ingot and casting processes.

Minimum Order: 1 bags

Incorporated in the year 2015, Like Industries (An ISO 9001-2015 company) is the leading Manufacturer and Exporter of Ceramic Balls, Alumina Ball and much more. The complete provided range is manufactured by our adroit professionals using the finest quality raw material and innovative technology in sync with industry norms. Furthermore, our quality examiners test this media on various parameters before its final delivery to provide flawless product at clients' end. We offer this Grinding Media Balls to our clients at economical prices. Benefits: 1. Higher wear resistance 2. Better milling efficiency 3. No contamination to the product 4. It has higher hardness 5. No reaction with acids (except HF) 6. Anti abrasive & anti corrosive Technical Specification Al2O3 (%) - 92 Bulk density (g/cm3） - 3.65 Water absorption （%） - <0.01 Mohs's Hardness (scale） - 9 Abrasion loss（%） - 0.011 The Advantages of Alumina Balls or Ceramic Balls compared to Steel Balls. 1. Harder Than Steel in wear resistance. 2. Eliminate Iron Contamination 3. Low Heat Builduo 4. Non- Corrosive 5. Lower Density and Higher Hardness offer energy saving. 6. Extended Mill Life 7. Reduced Noice Pollution Industries : 1. Cement 2. Pharmaceutical 3. Food 4. Biotech 5. Paints & Pigments 6. Oxides 7. Material Processing

Minimum Order: 20 square metres

Chrome Round Target Purity: 2N5, 3N5, 4N Size: Dia 100*32/40/45, Dia 63*40/42mm OR according to customers’ requirement. Process: Hot Isostatic Pressing (HIP) Application: Tools plating, decorative plating

Minimum Order: 1 bags

Silicon Planar Target Purity: 5N Growth method: CZ Crystal orientation: P/N Metal impurity: < 2ppm Size: customized Thickness: customized TIR:<1.2μm STIR:<0.3μm Warp:<30μm Application: Sem , iconductor, LCD, decoration and function coating industry, solar panel, data storage industry, optical communication industry, glass coating, corrosion resistance and wear resistance

Minimum Order: 1 bags

ITO Planar Target Composition: In2O3: SnO2 = 90:10 (wt%), or customers' requirements Purity: 4N Size: Max 1200*300mm or according to customers' requirements Resistivity: ≤ 1.8 Ω· mm2 / M Oxygen loss rate: ≤ 0.5% Application: LCD, touch screen, anti radiation glass, anti fog and defrost glass. Solar glass and other fields.

Minimum Order: 1 bags

Zirconium Round Target Purity: 2N5 Grain size: ≤100um Size: Dia 30-2000mm, thickness 3-300mm OR according to customers’ requirement. Surface: bright and smooth Application: Tools, plating, decorative plating

Minimum Order: 1 bags

Niobium Oxide Rotating Target Purity: 3N5 Material: Nb2Ox Size: OD 50-160mm, thickness 4-17.5mm;L 200-4000mm OR customized Resistivity:＜0.1ohm.cm (20 ℃) Grain size: <100um Process: plasma spraying Applications: Low-E glass film, thin film solar cell electrode, TFT, semiconductor

Minimum Order: 1 bags