Consumer Electronics

Screen Refurbishing Machine TBK 983A Automatic Glue Dispenser Automatic Glue Filling Machine Glue Applicator Built-in Pump Mobile Phone Glass Frame Dispenser.

Minimum Order: 1 bags

TBK-958M Mini Laser Engraving Separation Machine for Smartphone Screen Dispaly and Rear Glass Replacement. TBK 958M Laser machine in 110v 220v for LCD screen back glass removal repair. TBK-958M (mini) laser Engraving and Separating Machine 2021 Newest Designed Mini Sized Laser Engraving and Separation Machine for Smartphone Screen Dispaly and Rear Glass Replacement Small size 36.5*23*42cm, Light Net-weight 6.0 kgs; The max height of the engraved object is 55mm, and marking range 175×175mm. Independently researching and developing the Optical path; Integrated-power mini laser, equipped with upgrading data in cloud; Imported sensor auto focus and imported high precision calibrator; External computer; one-button focus, one-button starts, simple operation.

Minimum Order: 1 bags

TBK 2021 built-in double pump vacuum separator, heating and separating the mobile phone LCD screen frame and OCA glue removal Detailed Steps: 1. Turn on the power: Plug the power cord into the power connector on the back of the separator, and turn on the power switch. 2. Preset temperature: Press the SET button to preset the temperature, press the up button to set the temperature to about 85 degrees, and press NET to save. 3. Prepare the wire handle: equipped with a wire handle to separate the screen 4. Place the silicone non-slip mat: put it on the panel of the separator, align the rubber mat with the panel holes. 5. Screen separation preparation: Put the screen to be separated in the center of the panel, press the start key to start vacuum adsorption, and ensure that the screen is held. 6. Start cutting the screen: the screen is preheated for 3-5 minutes to start cutting. 7. After removing the bad screen, turn off the power of the separator. If it is dry glue, you can directly tear it off. If the water glue needs to be removed with the help of a blade and a glue removing solution. Features: 1. Can be used for straight screen or curved screen to remove glue LCD separation maintenance etc. 2. The heating table can rotate 360 degrees, the working temperature is 85℃, the highest temperature is 350℃, and the maximum support is 7 inches. 3. Built-in double vacuum pumps, strong suction, to ensure that the phone is firmly fixed. 4. Thermal insulation non-slip silicone pad, high temperature resistant insulation material ddoes not affect the suction, you can also choose not to use silicone pad 5.The heating platform is protected by a fuse to prevent burnout.

Minimum Order: 1 bags

ATTEN ST-965 Soldering station, Constant Temperature Adjustable Anti Static Phone motherboard Welding Tools, ST-965 Soldering station with Temperature locking,temperature calibration and temperature alarming function. Temperature locking,temperature calibration and temperature alarming function Password protecting function and temperature unite switching function Buttons(1,2,3) for pre-setting or switching frequentlyused temperature New design with LCD display screen making control visualization Automatic standby ,shutdown with smart time setting MCU controlled temperature calibration Beep alarm function available Security sticker Copper transformer Pluggable heater SMT Process

Minimum Order: 1 bags

SUGON T26D: 2 seconds temporary warming humanized design, convenient for the use of maintenance personnel, Innovative design, high-quality guarantee, The precision iron head can be used with JBC 210 handle. Product Features: Three memory channels are CH1, CH2, CH3, and the temperature of each channel can be set separately for storage and recall Easy real-time operation,it immediately into sleep mode when the handle is placed on holder The single-chip microcomputer control system can make the temperature of the soldering iron head rise rapidly, which means that the user can operate at a lower temperature and improve the soldering quality and working efficiency. When the soldering iron is in the sleep state, can prolong the life time of heating element. Application : Input voltage: 220V/110V 50HZ Output temperature: 200 ~ 500 degrees Celsius Power: 80W Max Ambient Temperature: 40℃Temperature Stability: ±2℃/Without air flow and no load Tip to Ground Resistance: <1Ω(DC) Tip to Ground Potential: <25mV(True RMS) Just use the metal part of the handle to touch the iron stand( don't use the sharp tip ) the temperature immediately rises by 80 degrees for 15 second. Sugon T26D Standard set: 1x Sugon T26D Soldering Station 1x Sugon T26D welding handle 1x Power Cable 1x Original JBC C210 iron tip(random model) 1x OEM C210 iron tip

Minimum Order: 1 bags

Xsoldering lead-free solder station with option JBC Tips, Xsoldering 200W 2.5S Lead-free Soldering Station Rapid Heating Soldering Iron Kit working with JBC handle and JBC 210* Tips Application Input voltage：220V/110V 50HZ Output temperature: 200 ~ 500 degrees Celsius power: 200W Max Ambient Temperature: 40℃ Temperature Stability: ±2℃/Without air flow and no load Tip to Ground Resistance: <1Ω(DC) Tip to Ground Potential: <25mV(True RMS) just use the metal part of the handle to touch the iron stand(dont use the sharp tip) the temperature immediately rises by 80 degress for 15 second

Minimum Order: 1 bags

Double Handle Xsoldering Pro Welding Station work with OEM JBC C210 C245 Tips, Double Handle Xsoldering Lead-Free Precision Soldering Station With OEM JBC C210 C245 Double Handle. double soldering station with C210 and C245 Handle. double handle used at the same time. Xsoldering Pro double handle soldering station without any tips, and with C210 and C245 handle, 200W Xsoldering Pro professional soldering stand with 2.5S heating soldering system.

Minimum Order: 1 bags

SUGON T36 nano SMD Precision soldering station with a JBC C115 soldering tip, 1s rapid heating 300W electric heating system with JBC handle and soldering tip cell phone soldering repair. Parameter: Input voltage: AC110V 50/60Hz, AC 220V 50/60Hz Power: 85W Temperature range: 200℃ - 450℃ 232°F - 842°F Installation Notes: A Connection ( Attention: Turn off the power and avoiding damage PCB during unplug or plug in the soldering iron handle) 1 Plug in the soldering iron handle to the proper host socket. 2 Installation heating element. 3 Place the soldering station and hang the soldering iron handle on the bracket. 4 Make sure the power cord is plugged in correctly. 5 Turn on the machine, display window shows: "---", it is on standby mode. Temperature setting and storage: Heat Up: Press ↑ buton once, the teperature window will show the set temperature to up 1℃. hold ↑ button for at least one second, the set temperature will heat up rapidly until up to the set temperature you did set. Cool down: Press ↓ button once ,the temperature window will show the set temperature to down 1℃. hold ↓ button for at least one second, the set temperature will cool down rapidly until down to the set temperature you did set. After parameter data is set,keep hold CH1 button to up or down temperature and save it.similarly, keep hold CH2 or CH3 button to set the storage temperature and save them. Do bring out the memory temperature,press CH1 button (less than 1 second) and bring up the saved data, similarly CH2 or CH3 to bring up the memory data as well.

Minimum Order: 1 bags

TBK 308A 2 in 1 15 inch Vacuum OCA Laminating Machine with Air Bubble Remove Function for Mobile Phone LCD Repair. TBK-308A 15 inch Vacuum OCA Laminating Machine & Bubble Remover Built-in Vacuum Pump Air Compressor Debubbler. TBK-308A 15 Inch OCA Vacuum Laminating Remover Bubble MACHINE 2 IN 1 Touch Screen Repair Machine. TBK308A Vacuum Pump Laminating LCD Screen 15inch OCA Lamination Machine With Bubble Remover.

Minimum Order: 1 bags

OCA Lamination Machine TBK108P Vacuum Laminating Machine For Fat Curved Straight Tablet LCD Repair Machine,TBK108P 220V EDGE LCD screen Laminating Machine phone LCD Glass Vacuum Lamination Machine Bubble remover,OCA Lamination Bubble Removing Machine for LCD Screen Refurbish Specification Power Supply: AC100V-240V 300W Working Pressure: 0.4-0.6Mpa Work Environment: 20-23 Centigrade, dust-free room Fitting Way: Flat Curve Tablet laminating Productivity: 15s-300s/1pcs Heating Mode: Thermostatic heating Laminate cabinet Size: 200*90*300mm Machine Size: 320 * 330 * 330mm

Minimum Order: 1 bags

50PCS HD Hydraulic Film For Mobile Phone Front Screen Back Cover Protector Ultra thin For PHONEFIX FX-866 Auto Film Cutting Machine Specification model: 120*180 For iPhone and Android phones 120*180 HD Hydraulic Film 120*180 Anti-blue light Hydrogel Film 120*180 Matte Hydrogel Film 200*300 For ipad /Tablets etc： 200*300 HD Hydraulic Film 200*300 Anti-blue light Hydrogel Film 200*300 Matte Hydrogel Film Back films (MOQ: 100pcs) Function： 1. More than 12000 styles of data, which cover all models of front films, back films and full coverage back films. They are suitable for mobile phones, tablets, watches, cameras, and airpods, etc. 2. Can cut 12.9 inches of large films, and use it as you like. 3. Automatic film feeding with movie exit function, more convenient to operate. 4. Cloud data update, update models automatically. 5. Hole Position Precise. The screen protector film, which has been cut is perfect fitting with the phone screen. 6. Suitable for different types of TPH / TPU / 9H / INK film 7. Support phone x and y mirror 8. Support the cut explosion-proof film in the size of 0.35-0.37mm. 9. Support car rear view mirror film 10. Support blank back film DIY function 11. The size for capacitive touch screen is bigger. It Is convenient for larger finger to touch and operate. Items 3, 7, 8, 9 and 10 are not available in other film cutting machines. Features： Universal before and after a film All inclusive before and after, all-round protection Suitable for mobile phone front/rear film, watch, AirPods, camera All-inclusive surface, reject white edges Seamless fit, no warping, no ash Note: There is a cutting limit. The machine comes with a 200-cutting quantity. If you need more cutting times, you need to purchase a film separately(same brand film)

Minimum Order: 1 bags

MECHANIC S760 AI Auto Film cutting machine with touch screen mobile phone camera tablet front back cover protect film cut tool 1001,1002, 1003, 1004, 1005: 120*180mm 1011: 200*300mm Working environment temperature: -5~45℃ Voltage: 110V-240v Cutting accuracy: ±0.1mm Speed: 300-600mm/S Maximum material width into the machine: 180mm Maximum material depth into the machine: 120mm Cutting pressure: 30-90 digital gear (corresponding pressure 150-450g) Data transmission method: comes with cloud service output, no registration required Advantages: Large touch screen display, comes with 15 languages 1. Cloud data, easy to operate, born for mobile phone film cutting; Intelligent operating system, massive data, real-time updates from the cloud, large touch screen display, strong stability; 2. Cloud database, wireless WIFI networking, one-click update, real-time acquisition of new data; 3Any model can be customized and cut on site, covering all major brands such as mobile phones, watches, cameras, tablets, and game consoles; 4. Suitable for a variety of materials, such as flexible explosion-proof film, TPU soft film, brushed back film, dermatoglyph back film, matte film, original machine protective film, blue light eye protection film, privacy film, OCA dry glue, etc. ； 5. High-definition display, large touch interface, support 15 language switching, covering more than 200 countries and regions around the world, smooth use and easy operation; 6.11 adjustable cutter head, the adjustment is more intuitive, thick and thin materials, precise cutting; 7. Paper pressing function, integrated linkage pressing wheel group, paper feeding is stable, can be adjusted according to actual usage

Minimum Order: 1 bags

TBK-988X LCD Curved Screen Separator Max 7 Inches Adjustable Constant Temperature Heating For Samsung HUAWEI Edge Screen Repair Specification. TBK 988X is discontinued, the alternative is TBK 988C. TBK 988C Built-in Double Vacuum Pumps Flat Edge LCD Touch Screen rotary Separator Machine Max 7 inches with Glue Clean Remove Middle Frame Clamp Specification: Brand:TBK Mo , del Number:TBK 988x/988c Power:250W Net Weight:4.5kg External dimensions:300*140*16mm Heating size:145*80mm Applicable size:Within 7 inch

Minimum Order: 1 bags

Mechanic T12 Pro intelligent anti-static digital soldering station with aluminum alloy handle T12 iron tips, electric temperature controller soldering iron quick heating station for mobile phone repair. Product Features : Intelligent digital display 450°C high temperature Heat up in 4 seconds Regular dormancy Small and portable Safe and convenient Rapid warming : 4 seconds heating up 5 seconds tin, say goodbye to the long warm-up, no need to wait Two in one heating copper core and soldering tip : Lead-free soldering tip, fast heat conduction, oxidation resistance and easy soldering Automatic standby - automatically wake up : New handle design, you can pick up the handle and wake it up at any time, get rid of the shortcomings like slow heating of the traditional 936 LED digital temperature control display : Adjustable temperature 200°C 450°C, Control at any time, precise temperature control Intelligent function control : Intelligent automatic sleep, standby, and shutdown functions greatly improve the life of the heating copper core, safe and energy-saving, effectively reducing safety hazards Small and convenient : Palm-sized, portable on business trips, solve the difficult carry of traditional one

Minimum Order: 1 bags