Consumer Electronics - Others

1.For all 12-24V vehicles Waterproof , Mini size , Easy hide and Install Support Micro SD card 2.Location based service(LBS) + GPS double tracking solution 3.GPS blind spot alert Less gprs mode ( to save gprs data ) Checking balance by sms 4.Multi power-saving mode : Sleep by time / shock sensor deep sleep awake at specific time 5.Save GPRS traffic mode(Money save mode) 6.Anti-theft gsm alarms: Movement alarm Geo-fence alarm Over speed alarm ext.power off alarm low battery alarm 7.Alarms : ACC/Shock/Door open alarms 8. Shutdown engine by SMS. 9.Support 2GB MicroSD card 10.Built-in memory for 16,000 positions 11.Built-in 500 mA polymer battery 12.SMS tracking on cell phone with google map link 13. Get absolute street address by SMS 14.Web server, free PC tracking soft, Mobile phone APP 4 Tracking methods : 1. Get lat/long , googleMAP by SMS 2. Get absoulte address by SMS 3. Online platform gpstrackerxy ( ID:demo , password : 8888 ) 4. Mobile app TrackerHome for IOS Android phone

Minimum Order: 10 long tons

JC ear speaker receiver FPC flex cable with JCID receiver test board for iPhone X-13 Pro Max, solving the problems of no auto photosensitive and no true tone caused by damaged or missing original FPC flex. JCID X-13PM receiver detection adaptor works with JCID V1SE/V1S Pro programmer and JC earpiece distance photosensitive sensor cable fixes iPhone Face ID true tone problem. Option: 1. JC receiver FPC board for iPhone 8-13 Pro Max(works with JCID V1SE/V1S Pro only). 2. JC receiver FPC sensor flex cable for iPhone X/XS/XS MAX/XR/11/11PRO/11 Pro Max/12 Pro/12 Pro Max/12 mini/SE2/13/13 mini/13 Pro/13 Pro Max. Functions: 1. The receiver FPC controls True Tone and also acts in the Face ID process. 2. The receiver is often broken by a screen change and until now has not been replaceable. 3. The add-on board when connected to the V1SE/V1S PRO will enable the programming of a new receiver and fix missing True Tone and Face ID not available. (If your Face-ID error is move a little higher this is a different fault and different repair procedure). Feature: 1. Support to repair iPhone X-13 Pro Max face ID truetone problem caused by receiver FPC Failure, and not require original receiver FPC. 2. Receiver FPC detecting adaptor is for working on JC V1SE and V1S Pro, which support repair 8-13 Pro Max full series face lD true tone problem caused by receiver FPC failure, no require original receiver FPC. 3. JC ear speaker receiver FPC flex cable with JCID receiver test board for iPhone X-13 Pro Max, solving the problems of no auto photosensitive and no true tone caused by damaged or missing original FPC flex. 4. JCID X-13PM receiver detection adaptor works with JCID V1SE/V1S Pro programmer and JC earpiece distance photosensitive sensor cable fixes iPhone Face ID true tone problem.

Minimum Order: 1 bags

I2C CF Dot Matrix Calibrator for iPhone X-14 Pro Max dot projector lattice alignment. I2C 19 in 1 dot matrix calibrator for iPhone X-14 Pro Max Face ID repair. I2C 15 in 1 dot matrix calibrator for iPhone X-13 PRO Max Face ID repair. i2C CF dot projector calibrator fixture for iPhone X/XS/XS Max/XR/11/11 Pro/11 Pro Max/12 Mini/12/12 Pro/12 Pro Max/13 Mini/13/13 Pro/13 Pro Max/14/14 Plus/14 Pro/14 Pro Max Face ID Repair. Option: 1. i2c CF 15-IN-1 Calibrator fixture for iPhone X-13 Pro Max. 2. i2c CF 19-IN-1 Calibrator fixture for iPhone X-13 Pro Max. Features: 1. Built-in strong magnetic adsorption and precise calibration make facial maintenance more efficient. 2. 15-in-1/19-in-1 calibrator fixture refuses to be cumbersome, and all models can be handled in one. 2 seconds alignment 5 seconds repair, new alignment locking design, maintenance success rate reaches 99%. 3. Support iPhone X-14 Pro Max. Air avoidance design, strong magnetic adsorption and 360℃ rotary buckle. 4. Acrylic high hardness transparent base, transparent and unobstructed, more convenient for alignment. 5. Dot matrix alignment artifact, no need to align by feeling, one base is suitable for 19 models.

Minimum Order: 1 bags

Qianli Universal Dot Matrix Repair Fixture for iphone X XS XSMAX 11 11pro Max Face ID Repair Qianli Face ID Dot Projector Repair Holder. Product Features : Made of high quality durable material. Special dot projector fixture. Universal perfectly assemble flex of dot projector. Unique flex cables groove design. Anti-scalding. Unique light design, helps to position DOE Dot Projector / Ttrue tone laser reballing stencils. Used to easily repair the Face ID of iPhone. Specially designed for iPhone X / XS / XS Max / XR / 11 / 11 Pro / 11 Pro Max / 12 Mini / 12 / 12 Pro / 12 Pro Max.

Minimum Order: 1 bags

i2c Original Rubber Replacement Special Gasket Dot Matrix Repair Optical Lens Rubber Ring Aprons Gasket for iphone Face ID fix. I2C original optical lens rubber replacement gasket for iPhone repair. Optical Prism Original Adhesive Replacement Gasket for iPhone X-12 Pro Max. When the original optical lens adhesive is disassembled and assembled. Once damaged,it is impossible to locate the face,Face failure will be irreparable.

Minimum Order: 1 bags

i2c original rubber replacement special gasket. I2C original optical lens rubber replacement gasket for iPhone repair. Optical Prism Original Adhesive Replacement Gasket for iPhone X-12 Pro Max. When the original optical lens adhesive is disassembled and assembled. Once damaged,it is impossible to locate the face,Face failure will be irreparable.

Minimum Order: 1 bags

i2C Dot Matrix extension test cable for iPhone 12-14 Pro Max Face ID repair. i2C iPad12X dot matrix extension flex cable iPhone 12/13/14 series Face ID repair transfer cable for I2C i6S/Face-14/V8I programmer. Repair face problem is the original face problem to repair, can not transfer another motherboard face directly to the new motherboard. Repairing faces is a highly technical job that requires face IC replacement and programming. Option: 1. i2C Dot Matrix Extension Test Cable For iPhone 12/12mini/12 Pro/12 Pro Max(Connect iPad A12X). 2. i2C Dot Matrix Extension Test Cable For iPhone 13/13mini/13 Pro/13 Pro Max(Connect iPad A12X). 3. i2C Dot Matrix Extension Test Cable For iPhone 14/14 Plus/14 Pro/14 Pro Max(Connect iPad A12X). 4. i2C Dot Matrix Extension Test Cable For iPhone 14 Pro/14 Pro Max(Connect iPad A12X).

Minimum Order: 1 bags

JC Dot Matrix cable for iPhone X-13 Pro Max Face ID repair. JC Dot Matrix Flex Cable is used to repair iPhone Face ID lower/higher issues. JC dot projector lattice IC chip for iPhone 13/13Pro/13 Pro Max/13 mini face ID repair. JC Dot projector flex cable used with JC Pro1000s Dot Matrix Module or JC V1S dot projector board. JC Face ID Dot Flex Cable For iPhone X/XS/XS MAX/11/11PRO/11 Pro Max/12/12Pro/12 Pro Max/12 Mini/13/13Pro/13 Pro Max/13 mini. JC dot matrix flex cable full set 13pcs(X-1 Pro Max): 1x JC dot matrix flex cable for iPhone X. 1x JC dot matrix flex cable for iPhone XS. 1x JC dot matrix flex cable for iPhone XS MAX. 1x JC dot matrix flex cable for iPhone XR. 1x JC dot matrix flex cable for iPhone 11. 1x JC dot matrix flex cable for iPhone 11 Pro. 1x JC dot matrix flex cable for iPhone 11 Pro Max. 1x JC dot matrix flex cable for iPhone 12/12 Pro. 1x JC dot matrix flex cable for iPhone 12 Pro Max. 1x JC dot matrix flex cable for iPhone 12 Mini. 1x JC dot matrix flex cable for iPhone 13. 1x JC dot matrix flex cable for iPhone 13 mini. 1x JC dot matrix flex cable for iPhone 13 Pro/13 Pro Max. Tools required: JC Face lattice detection module (JC Dot Matrix Module) +JC Pro1000s, or JC V1S + V1S dot projector board. Specific cable model: iPhone X, XS, XS MAX, XR, 11, 11 PRO, 11 PRO MAX,12, 12Pro, 12 Pro Max, 12 Mini, 13, 13Pro, 13 Pro Max, 13 mini.

Minimum Order: 1 bags

iPhone Face ID infrared flex cable only, iPhone front infrared camera flex cable For iPhone X/XS/XS Max/11/11pro/11Pro Max, iPhone Infrared Flex Cable for replacing damaged iPhone face ID infrared flex cable. Face ID Front Camera Infrared Flex Cable for iPhone X/XS/XS MAX/11/11 Pro/11 Pro Max Model: X/XS: iPhone X/XS Infrared Camera Flex Cable only XS Max: iPhone XS Max Infrared Camera Flex Cable only XR: iPhone XR Infrared Camera Flex Cable only 11: iPhone 11 Infrared Camera Flex Cable only 11 Pro: iPhone 11 Pro Infrared Camera Flex Cable only 11 Pro Max: iPhone 11 Pro Max Infrared Camera Flex Cable only Note: 1. Please choose the right model. 2. Professional skills and special repair tools are required for replacing iPhone flex cable. 3. China Phonefix is not responsible for any damage caused during installation and after use. Package list: 1X iPhone Infrared Camera Flex Cable(cable only).

Minimum Order: 1 bags

QianLi ToolPlus lattice face precision calibrator for iPhone X/XR/XS/XS Max front camera repair, Qianli dot projector precision calibrator for iPhone X/XR/XS/XS Max repair. Please: Don't press by force. Product Features : Fast fix Multi-model adaptation High hardness aluminum alloy Auxiliary fit and precise alignment Note : Only calibrator, no flex cable. Product Size: 50*16*8.15mm Packing Size: 64*44*20mm Package List : 1pc dot projector calibrator for iPhone XR 1pc dot projector calibrator for iPhone X/XS/XS Max

Minimum Order: 1 bags

Magico iFace tool face dot matrix projection repair detector for iPhone X XR XS Max 11 Pro Max Face ID repair tools, Dot Projector Programmer and dot matrix flex cable for iPhone Face ID ''higher'' ''lower'' repair. Magico iFace Tool Dot Projector Programmer For iPhone X-11 Pro Face ID ''Higher'' ''Lower'' Repair. Package Features: Solve Face ID Not-working Problems: “Move iPhone a little lower/higher”, “Face ID is Not Available”, “Face Not Recognized”, “Unable to activate Face ID on this iPhone”, etc. Support Face ID Fusion, Offline Data Read & Write, Program Burning & Erasion; with Free Update! Support Offline, Power-Off & PC-free Data Saving! 3rd Generation FPC! Low Energy Consumption! No Power Leakage! Flex Cable Support Model : For iPhone X For iPhone XR For iPhone XS For iPhone XS Max For iPhone 11 For iPhone 11 Pro For iPhone 11 Pro Max For iPad 12

Minimum Order: 1 bags

JCID 4th Gen Dot Projector Module For iPhone X-13 Pro Max iPad Pro 3/4 Face ID Repair. JC dot matrix detection module supports read and write iPhone X-12 Pro Max/13 Pro Max/iPad A12X Face ID data to repair iPhone Face ID not working issue. JC dot projector repair module needs to be used with JCID V1S Pro programmer or JC Pro1000s. Option: 1. JC dot projector module 4th Gen for iPhone X-13 PRO Max iPad Pro 3/4. 2. JC dot matrix detection module 3rd Gen for iPhone X-12 Pro Max iPad Pro 3/4. 3. JCID V1S Pro programmer. Features: 1. Support for iPhone X/XS/XS Max/XR/11/11 Pro/11 Pro Max/12/12 mini/12 Pro/12 Pro Max/13/13mini/13 Pro/13 Pro Max/iPad Pro3/iPad Pro4. 2. Support Data Reading For Independent "Luminous Modules". 3. Solve the problem that the cable is damaged and I2C is disconnected and unable to read the data. 4. Support 25 pin DOT projector chip test. 5. Support to check if the face dot matrix is normal, and the functions like fuse, NTC disconnected, I2C disconnected, short circuit etc. 5. Support operation on JCID V1S Pro and JC Repair Assistant.

Minimum Order: 1 bags

WL Face ID repair fixture for iPhone X-11 Pro Max dot matrix reballing soldering repair. WL Face ID dot projector infrared camera flood fixture for iPhone X-11 Pro Max. WL Face ID repair fixture for iPhone X-11 Pro Max dot matrix reballing soldering repair. WL Face ID dot projector infrared camera flood fixture for iPhone X-11 Pro Max. Product Features: Support for iPhone X - 11 Pro Max. Accurate positioning. Tin planting platform. Imported synthetic stone. High temperature resistant imitation static electricity. Package Includes: 1pcs x WL Dot Matrix Fixture

Minimum Order: 1 bags

WY Dot Matrix Lattice alignment flex cable for for iPhone X /XS /XS max XR 11 11Pro/Pro Max 12/ 12Pro/ 12 Pro Max Face ID Testing Repair. WL alignment axis extension face lattice maintenance repair cable. Product Features : After the lattice repair is completed, there is no need to apply glue. The extended cable can cooperate with the fixture to test the face in advance, and then paste the glue to achieve 99% perfect alignment of the lattice. In the process of face maintenance, there is a common problem: the deformation of the fixed iron frame of lattice and infrared leads to the failure of face entry (referred to as shaft adjustment). The wire arrangement can be extended to the top of the machine to facilitate shaft adjustment. Package Includes : 1pcs x Dot Matrix Extension Cable

Minimum Order: 1 bags