Shoes & Fashion Accessories - Others

Backup facilities // Cutting mats Cutting mats (board) are an indispensable assistant for the designer of a shoe and sewing companies. Protects the surface of a usual table from scratches. It is steady against cuts of knives and blades. On such a mat the leather and fabric glides less. The net on the mat helps you quickly set aside the required distances and draw various angles. You can put a pattern directly on the mat. The mat can be used from 2 sides. Available formats: A0 (84.1x118.9cm), A1 (59.4x84.1cm), A2 (42.0x59.4cm), A3 (29.7x42.0cm), A4 (21.0x29.7cm)

Backup facilities // Thermo-disappear pens Thermo-pen or thermo-disappearing pen is a high-tech “magic”. Designed for marking marks on the surface of the leather and removal by temperature. When the material is heated or by exposure to air over 60 degrees, the mark disappears by itself without leaving any marks.

Backup facilities // Refill pens The refill pens are an excellent solution for marking marks on natural and synthetic leather. Perfectly write, easy to erase (by Marker to remove marks). Our company offers the refill pens in various basis: plastic and metal. Each of them has its own advantages and differential features. The plastic case does not slip in the hands, and the metal one is suitable for cutting complexes. Colors of the refill pens: gold, silver, white, black, red.

Automatic machine for installing the loops art. FGL-100 The automatic machine for installing loop is an indispensable machine for mass production of shoes and leather goods. Differential features of this machine are simplicity, reliability and low cost compared to similar machine. The loops are fed by drum to installing place where after put on foot pedal the loop is installed to the goods. A removable body providing protection against injuries hides all mechanical parts of the machine. Various types of loop can be installed on this type of machine by changing the tools and additional adjustments (settings). The machine can be complete set of a laser pointer, which will indicate the exact installation point of loop. FURNITUR-BY LLC supplies, installs and sets up machines art. FGL-100. Provides training for your specialists if necessary. Provides warranty and post warranty services. Keep in the stock the spare parts. Produce tools for the machines of this type for the installation of accessories. Warranty - 6 months.

Shoe materials // Shoe kersey Kersey is a material based on a multilayer cotton or synthetic fabric treated with film-forming substances (rubber, polymer). Used as a leather substitute. The surface of the kersey is embossed to simulate the texture of pigskin. It goes mainly to the production of bootleg and other parts of shoes in the production of workers and military boots. There are several types of kersey: Kersey 3K or "Universal" - a universal kersey for work shoes. Kersey L1 - wear-resistant kersey for military shoes.

Shoe materials // Material "Jersy" Lining material JERSEY is 100% cotton with a hot glue coating. The material has a high density and is formed a vamp in the shoe. A special treatment gives it a level of softness and breathability. JERSEY does not emit a bad smell and is environmental responsible. The main quality of JERSEY is full elasticity, simplifying the molding process, guaranteeing an excellent result.

Shoe materials // Material "Net 3D" 100% Polyester. Volumetric material with high hygienic, aesthetic and strength characteristics. It is used as an outer and lining material in the production of various products such as shoes, backpacks, bags, seating furniture, mattresses, car covers, bandages, sports equipment, etc. In the shoe industry, it is used on the entire inner surface of the shoes. 3D net is an excellent solution for the production of special, sports and hiking shoes because it has high breathability, has abrasion resistance, it has antibacterial properties and is hardwearing to use.

Shoe materials // Cambrelle Cambrel is a laminated non-woven material with hygroscopic capacity. Its ability to absorb liquid, the volume of which is three times more than own volume, made it indispensable in the manufacture of insoles and lining for trekking shoes and outdoor shoes. Cambrel prevents the generation of fungi and bacteria, which is particular true for sports shoes, clothing and furniture. Camembert is available in various densities and in a wide range of colors. The material may have an additional hot-glue adhesive layer or a self-adhesive coating and be duplicated by porous, bulk materials.

Shoe materials // Synthetic split Synthetic velor is an excellent woven microfibre material for universal use in your production: it can be used as a lining material, or as a covering on the insole in women, men and children shoes. Microliner has a beautiful trade dress, pleasant to the touch. At the same time, it is extremely strong and abrasion resistant material. Microliner will provide an optimal microclimate inside the shoe due to its microporous structure and the resulting high level of water transmission. Using synthetic velor you will get: - beautiful trade dress of shoes; - the ability to make a lining and insole in one color; - color-resistant and soft lining.

Shoe materials // Synthetic velour Synthetic velor is an excellent woven microfibre material for universal use in your production: it can be used as a lining material, or as a covering on the insole in women, men and children shoes. Microliner has a beautiful trade dress, pleasant to the touch. At the same time, it is extremely strong and abrasion resistant material. Microliner will provide an optimal microclimate inside the shoe due to its microporous structure and the resulting high level of water transmission. Using synthetic velor you will get: - beautiful trade dress of shoes; - the ability to make a lining and insole in one color; - color-resistant and soft lining.

Shoe materials IBISOLEX Hardness non-woven insole material with excellent capacity for heat forming. Developed specifically for the main insole in the production of shoes with stitching and gluing-stitching method of fastening. It has a good elastic properties, provides high strength stitch, easy and high- quality bonding. THE MAIN CHARACTERISTICS: - High strength stitch; - No delamination; - Easy and high-quality bonding; - Excellent capacity for heat forming; - Thickness: from 1 till 4mm; - Ability to order material with additional waterproof properties.

Fashion accessories // Plates It is possible to produce decorative plates with a different method of installing them to the product: • fastening to the product by sewing; • fastening to the product with "mustache" one or more; • fastening to the product on the casting shanks from a ZAMAK (shank) + head of rivet; • fastening to the product on the shanks (shank) of the rivet attached to the plate + head of rivet.

Fashion accessories // Decoration FURNITUR-BY LLC is the only company in the Republic of Belarus that produces decorative accessories, jewelry, art products, key rings, badges, souvenir products, etc. centrifugal casting on the latest Italian equipment. The uniqueness of this casting method in the possibility of producing small batches (from 100 units) and a high production speed of equipment (molds) for casting, not more than 5 working days. The manufacturing of equipment (molds) can occur both according to the customer’s model and on the basis of the developed models and 3D models by our designers. Casting material - ZAMAK 4-1 Casting accuracy up to 5 cells according to GOST 26645-85 Methods of coating products: electroplating, paint according to RAL The weight of the casting part may not exceed 150 g / pc. Dimensions of parts (LxWxH) not more than mm. (100x100x25)

Fashion accessories // Rivets FURNITUR-BY LLC is the only producer in the Republic of Belarus of decorative rivets in a combined way. There are several options for making decorative rivets. Option 1: the decorative part of the product is poured to the rivet shank, which serves as an ornament, and the installation and fastening of such an ornament occurs as a regular rivet on a head. Option 2: we make the casting of the workpiece, followed by gluing to the product of rhinestones, artificial stones, stickers of various subjects or with laser engraving, and the installation and fastening of such an ornament takes place like a regular rivet on a head. Because of using of three sizes of rivet shanks, we make products that are installed on a different package of thicknesses of natural or artificial materials.