General Hardware

Dia 36mm-930 Thread Bar Product Description Thread Bar / Post-Tensioning Bar Grade: PSB930 Dia:36mm Length: 9m, 12m or as per customers' requirements Technology: Hot rolled, right hand Accessories: full hex nut, spherical hex nut, bearing plate, domed nut, anchor bolt, foundation bolt, couplers, spring bar Packing: in bundles  Delivery: 15-30 days COMPOSITION: The PSB930 thread bar is made of black steel with a continuous right-handed along the entire length of the bar. The continuous threading allows the cut of the bar with different length according to the design requirements and it also improves the adhesion between the bar and grouting.

Dia 15mm-830 Thread Bar Product Description The PSB830 thread bar is made of black steel with a continuous right-handed along the entire length of the bar.The continuous threading allows the cut of the bar with different length according to the design requirements and it also improves the adhesion between the bar and grouting. Thread Bar / Post-Tensioning Bar 1. Grade: PSB830 2. Dia:15mm Length: 12m or as per customers' requirements Technology: Hot rolled, right hand Accessories: full hex nut, couplers, wing nut, water stop, Combi nut, Anchor nut,Swivel nut Packing: in bundles  Delivery: 15-30 days

ISO15977 RVT AL/ST Zinc Plating Open End Blind Rivet Made In China. Blind Rivets are a two-piece fastener that consists of a tubular body and with mandrel through the center. They are used to permanently fasten two or more pieces of materials together. Blind Rivets have the advantage of being installed from the front side of the material where access to the blind side is not available or necessary. They are inserted into pre-drilled holes of the materials being joined.Using a specific tool,the mandrel is drawn through the body of the rivet and is snapped off once the blind end expands. Products name ISO15977 RVT AL/ST Zinc Plating Open End Blind Rivet Standard: DIN,ASTM/ANSI JIS EN ISO,AS,GB Material Carbon Steel,Aluminum;Stainless Steel:SS304, SS316,SS316L Finishing Black Oxide,HDG(Hot Dip Galvanized),Zinc Plated,Dacromet Related Products Bolts,Flat Washer,and Spring Washer Applications Blind Rivets allow objects to be fastened together when there is only access from one side and are often referred to as hollow rivets,pop rivets,or bread stem rivets. There are most commonly used with electronics,structural steel beams,aircraft,and sheet metal jointing. Stock Products Blind Rivets most of sizes are in stock. Get Free Samples for standard fastener from Jiangyin XiangGu Hardware Products Co.,Ltd Focus On Supplying High Quality Fasteners.

Production Range： RECESS： Philips,Square,Torx DIA：#6-3.5 #8-4.2 #10-4.8 #12-5.5 #14-6.3 HEAD：bugle head,Hex washer head,flat head,Pan Head, wafer head,pan framing head LENGTH： Grade：C1022A NORM：ASTM，DIN7504K,DIN7504P,DIN7504N < , br>Surface：black phosphate,zinc plated,Yellow Zinc plated,Ruspert,Magni Thread：BSD thread CSD thread

Minimum Order: 1000

High quality Big wafer head cement board screw Cement Board Screws with 8 nibs(4short & 4 longer) are ideal for installing cement board to wood and light gauge steel studs. include spoon point ,sharp point and drilling point ,Ruspert coating treated for extreme protection against rust and corrosion. The unique deep high-low threads allows quick entry and provide maximum holding power. The driver bit: Square #2 , Ph#2, Torx T25. #8 size. Two length available: 1-1/4" and 1-5/8". Cement board screws are designed to fasten cement board to wood or 25-20 gauge steel studs Screw point will drive hole through cement board, wood and metal without pre-drilling Product advantages: Corrosion resistant.Sharp point, deep and sharp hi-lo thread.For Interior or Exterior Use.Great for use with all cement boards.

Minimum Order: 100

G-209 HDG Screw Pin Anchor Shackle : These shackles are strong and durable. Come with a screw pin that can be connected and disconnected. Brand: Honyuan

Minimum Order: 200

Product Name Suspension spring Place of Origin China Brand Name Huilida Style Coil Type HLD01-SP Material High carbn steel Treatment Painting, Plain, Black or others Wire dia Form 0.1-20 Usage Industrial Endurance Limit 100000 times OEM Service Accepted Sample Delivery Within 7 working days custom suspension spring: Material：music wire , Carbon wire , Stainless steel wire , Copper and Beryllium copper and so on(or as customer's request). Surface treatment：Black ,Zinc plating ,Nickel plating ,Chrome plating (or as customer's request) Wire Diameter： 0.1mm-20mm

Minimum Order: 10000

Spring Clip,Clrclip Product Name Spring Clip Huilida Place of Origin China Brand Name Huilida Standard Not standard Material iron or stainless Treatment Self Finish and Oil OEM Service Accepted Sample Delivery Within 7 working days Spring Clip: It is puching parts, we can produce according to the drawings or samples. There are retaining rings for holes and shafts. We produce different sizes the buyers need. The material can be iron or stainless. Packing in bulk or carton. Acorrding to your request. https://www.chinahuilida.com/Spring-Cl , ip-Clrclip-pd48847274.html

Minimum Order: 10000

Wave Spring Washer DIN137 Product Name Waved Spring Lock Washer Place of Origin China Brand Name Huilida Standard DIN137,JIS1251,ASME 18.21.1 Material Carbon steel, stainless steel (A2, A4) Ect Size M3 up to M30 Treatment Zinc plated OEM Service Accepted Sample Delivery Within 7 working days Wave Spring Washer Huilida: The standard of this kind of washer on the pic is DIN137b. The material is steel or stainless steel,etc. FAQ Q. When can I get the price?   A: We usually quote within 24 hours after we got your inquiry. If you are very urgent to get the price, please call us or inform  us in your email .  Q: How can I get the quotation? A: Please send us information for quote: drawing, material, weight, quantity and request, we can accept PDF, ISGS, DWG, STEP file format. If you don't have drawing, please send the sample to us, we can quote based on your sample too . Q. Do you accept the OEM?  A: OEM is welcome. We can custom the goods according to your design .  Q. What is the shipping?  A: By express(FedEx, UPS, DHL, TNT, EMS, etc...), By Air and By Sea . Q. How do I pay for the order?  A: The common payments are T/T(Telegraphic Transfer), Western Union, Paypal . Q. I have an idea for a new product, but don't know if it can be manufactured. Can you help? A: Yes, it is our pleasure to work with potential customers to evaluate the technical feasibility of your idea or design, and we can advise on materials, tooling and so on . Q: What about the leading time for mass production? A: Honestly, it depends on the order quantity. Normally, 15 days to 20 days after receiving your deposit . Q: How if the parts are not good? A: We can guarantee good quality, but if happened, please contact us immediately and take pictures for us, we will check on the problem and solve it ASAP . https://www.chinahuilida.com/Wave-Spring-Wash , er-DIN137-pd46182074.html

Minimum Order: 10000

Disc Conical Spring Lock Washer DIN6796 Product Name Disc Conical Spring Lock Washer Place of Origin China Brand Name Huilida Standard DIN6796,JIS1251,ASME 18.21.1 Material Carbon steel, stainless steel (A2, A4) Ect Size Produce according to the standard or drawings Treatment Zinc plated, Dacromet Dacr, Environmental zinc, galvanized OEM Service Accepted Sample Delivery Within 7 working days Spring Lock Washer DIN6796: We can produce according to the standard or drawings. Welcome to your inquiry.

Minimum Order: 10000

Butterfly Pin,Cotter Pin Product Name  Butterfly Pin Place of Origin  China Brand Name  Huilida Standard  DIN94, DIN11024, DIN11023 Material  Spring steel, stainless steel,Cooper Size  Unstandard Treatment  Zinc plating, plain, etc OEM Service  Accepted Sample Delivery  Within 7 working days BUTTERFLY PIN HUILIDA : 1, standard: DIN94, DIN11024, DIN11023 2: Material: Spring steel, stainless steel,Cooper 3: Surface treatment; Zinc plating, plain, etc FAQ Q. When can I get the price? A: We usually quote within 24 hours after we got your inquiry. If you are very urgent to get the price, please call us or inform us in your email . Q: How can I get the quotation? A: Please send us information for quote: drawing, material, weight, quantity and request, we can accept PDF, ISGS, DWG, STEP file format. If you don't have drawing, please send the sample to us, we can quote based on your sample too . Q. Do you accept the OEM? A: OEM is welcome. We can custom the goods according to your design . Q. What is the shipping? A: By express(FedEx, UPS, DHL, TNT, EMS, etc...), By Air and By Sea . Q. How do I pay for the order? A: The common payments are T/T(Telegraphic Transfer), Western Union, Paypal . Q. I have an idea for a new product, but don't know if it can be manufactured. Can you help? A: Yes, it is our pleasure to work with potential customers to evaluate the technical feasibility of your idea or design, and we can advise on materials, tooling and so on . Q: What about the leading time for mass production? A: Honestly, it depends on the order quantity. Normally, 15 days to 20 days after receiving your deposit . Q: How if the parts are not good? A: We can guarantee good quality, but if happened, please contact us immediately and take pictures for us, we will check on the problem and solve it ASAP .

Minimum Order: 10000

Product Name Split Cotter Pin Place of Origin  Rui'an Brand Name  Huilida Standard  DIN94, DIN11024, DIN11023 Material  Spring steel, stainless steel,Cooper Size  M2-M8 Treatment  Zinc plating, plain, black oxide,etc USAGE  Machine, screw, furniture,etc OEM Service  Accepted Sample Delivery  Within 7 working days Split Cotter pin HUILIDA METAL: 1, standard: DIN94, DIN11024, DIN11023 2: Material: Spring steel, stainless steel,Cooper 3: Surface treatment; Zinc plating, plain, etc FAQ Q. When can I get the price? A: We usually quote within 24 hours after we got your inquiry. If you are very urgent to get the price, please call us or inform us in your email . Q: How can I get the quotation? A: Please send us information for quote: drawing, material, weight, quantity and request, we can accept PDF, ISGS, DWG, STEP file format. If you don't have drawing, please send the sample to us, we can quote based on your sample too . Q. Do you accept the OEM? A: OEM is welcome. We can custom the goods according to your design . Q. What is the shipping? A: By express(FedEx, UPS, DHL, TNT, EMS, etc...), By Air and By Sea . Q. How do I pay for the order? A: The common payments are T/T(Telegraphic Transfer), Western Union, Paypal . Q. I have an idea for a new product, but don't know if it can be manufactured. Can you help? A: Yes, it is our pleasure to work with potential customers to evaluate the technical feasibility of your idea or design, and we can advise on materials, tooling and so on . Q: What about the leading time for mass production? A: Honestly, it depends on the order quantity. Normally, 15 days to 20 days after receiving your deposit . Q: How if the parts are not good? A: We can guarantee good quality, but if happened, please contact us immediately and take pictures for us, we will check on the problem and solve it ASAP . https://www.chinahuilida.com/Spring-Split-Cot , ter-Lock-Pin-pd41577274.html

Minimum Order: 1 bags

Product Description Square Drive #8 X 1-3/4in Strip W/Nibs CSK Head Plastic Collated Wood Deck Screw 2000/Box Type 17 W/Nibs Wood Deck Screw Plastic Collated CSK Head Screw #8 X 1-3/4in Square Drive 0 Material Carbon steel Size #8 X 1-3/4 in. Head Countersunk ribbed head Drive #2 Square Thread Coarse thread Screw tip Type 17 Surface treatment Zinc Plated Quantity per box 2000 Application Timber Exterior deck screws, suitable for PT lumber 30 screws per easy load strip 2-1/2 in. twin thread, flat head with countersinking nibs and ShieldGuard coating Type 17 W/Nibs Wood Deck Screw Plastic Collated CSK Head Screw #8 X 1-3/4in Square Drive 1Type 17 W/Nibs Wood Deck Screw Plastic Collated CSK Head Screw #8 X 1-3/4in Square Drive 2Type 17 W/Nibs Wood Deck Screw Plastic Collated CSK Head Screw #8 X 1-3/4in Square Drive 3Type 17 W/Nibs Wood Deck Screw Plastic Collated CSK Head Screw #8 X 1-3/4in Square Drive 4

Indexing plunger pin material: Body SS303 Plunger SS303 Locking nut SS303 Knurled knob PA Thread: M10*1.0 Pin diameter : 5.0 mm More info about indexing plunger pin, please visit our website: www.riteon.biz

Minimum Order: 100