Other Industrial Equipment

This machine is mainly used for the mixing and foaming work of foam raw materials. It adopts frequency conversion double-stage stepless speed regulation, high-speed section automatic timing function, with automatic brake unit system, stable foam quality and simple operation.

Minimum Order: 1 bags

1)This equipment is mainly used to dismantle the electronic component from PCB of computer, TV set, and other electrical application facility. The PCB is heated to 200℃ to melt solder. The inner drum will spin out the solder and electronic component through 20mm*20mm screen from PCB board inside the drum. Then, the solder will be separated from the electronic component through vibrating screen 5mm*5mm. Solder recovery rate is 80%, and the purity is 60% as there is small pieces electronic component inside the solder. The recycled solder will be refined in an electrical resistance furnace to get the purity of 95%. 2)Compared with manual way, this dismantling equipment is automatical operation, high efficient, low cost, small covering area, easy operation, and no dust pollution. The PCB after dismantled, called base board, can be recycled by physical methods to get copper and other non-metal material. The dismantling rate can be to achieve 95%. 3)And its shell is double-layer and heat preservation.

Minimum Order: 1 bags

1)The machine use a percentage abrasive sand and water mixture, so there is no dust pollution to the work place, and the problem of the harm to workers health and abrasive recycling also greatly reduces the consumption of abrasives. 2)This function complete cleaning malleable cast parts, welding parts, heat-treated parts, stampings, and the rough surface of mechanical product, and the scale, the salt and burr, used for pretreatment process before spraying, electroplating, etc. 3)The machine is suitable for medium and small parts sheet small batch production. 4)Mold processing: mold surface and matte treatment, graphic production, as well as die cleaning, will not hurt the die surface, ensure accuracy of mould

Minimum Order: 1 bags

Subcritical fluid extraction is a fluid diffusion separation and extraction technology. Compared with supercritical CO2 extraction technology, it has the advantages of low operating pressure, simple process, low energy consumption, low investment, and easy industrialized mass production. It can solve the defects of small volume, high cost, high energy consumption and large scale industrial production of supercritical extraction equipment. Compared with traditional solvent extraction, subcritical fluid extraction has the advantages of normal temperature extraction, low temperature desolvation, protein invariance, non-oxidation of oil, no destruction of active ingredients, easy removal of solvent, and reduced emissions of “three wastes”.

Minimum Order: 1 bags

This wooden dowel making machine used for making round rod into dowel shape and the automatic cutting machine used for cutting the wooden dowel.

Minimum Order: 1 bags

The main molding equipment for producing various shapes of plastic products using plastic molding molds for thermoplastic or thermosetting plastics.

Minimum Order: 1 bags

Our Steam generator is run by power energy, no noise, no pollution. Using high quality heating elements, with a lower surface heat load and higher thermal efficiency. This product adopts cabinet design style, elegant appearance, compact internal structure and it's ideal for saving space.

Minimum Order: 1 bags

1.Grinding of the primer --- It can eliminate the concave of the surface of the workpiece after grinding. The unevenness improves the finish, prepares for the next top coat, and is used on a stand-alone basis. It is used in the coating of PE paint and PU paint. 2.Grinding of thick edges --- After stacking and spraying the plate, it will cause the phenomenon of thick edges on the four sides of the board. After grinding, this defect can be eliminated. It can be used by a single machine or a combination of two, and can be used with the coating line. use. 3, pre-treatment grinding, grinding of the workpiece before painting, can eliminate the phenomenon of black edges after roller coating, and the use of the coating line effect is significant. 4. Forming assembly lines, supporting roll coating lines and spraying lines, etc., forming automated lines, generally applied in NC paint coating and UV paint coating.

Minimum Order: 1 bags

1. This product contains cleaning dust collection, control, monitoring, video, and other functions can be used to clean the height is 20 m - 60 m within the scope of the various types of air duct, can meet the needs of the domestic variety of rectangular duct cleaning job  2.Can be 1 personal independent work, practice while learning.Implement single single machine cleaning, up to more than 1000 square meters per person a day to complete the duct cleaning area  3.3. There are two cameras before and after, and can realize high-definition infrared photography and camera.Within the duct without any light source can clean resolution, video, photo, storage.Without external synchronous implementation

Minimum Order: 1 bags

Suitable for crushing materials in industries such as pharmaceuticals, chemicals, and food. It is also suitable for crushing heat-sensitive materials and fibrous materials. It is also suitable for crushing and grading various materials such as chemicals, food, pharmaceuticals, cosmetics, dyes, resins, shells, roots, diameter, corn, rice, chili, pepper, oilseeds, soybeans, garlic, star anise, cinnamon, dehydrated vegetables, hawthorn, ginger, garlic slices, sugar, saccharin, grains, shrimp skin, pumpkin powder, seasoning, etc.

Minimum Order: 1 bags

Arc spray machine to melt the metal material by arc that between two pieces of conductive wire, and then send the molten metal atomization to the product surface with high speed. The arc spray machine is consist of power supply, control device, arc spray gun, wire.

Minimum Order: 1 bags

This equipment has the characteristics of high processing efficiency, simple operation, energy conservation, environmental protection, and pollution-free. After sandblasting, the surface of the product is clean and free of adhesive debris, and the sandblasting effect on the surface is consistent This conveyor type automatic sandblasting machine is a specialized sandblasting equipment designed and manufactured for automatic sandblasting processing of panel workpieces. It can sandblast the front, rear, left, and right sides of the product at once. The spray gun adopts an angle swing method, and the angle of the spray gun can be adjusted according to the shape of the workpiece to increase the sandblasting area and achieve good sandblasting processing results. This machine is equipped with a variable frequency speed control conveyor shaft, with a conveying speed of 1-2.0 meters/minute, which can be adjusted as needed. The outer surface of the roller is wrapped with rubber to prevent damage to the product during transportation. Can withstand a weight of 150KG. 5 Cyclone separator is equipped, which can make high-speed centrifugal force on the recycled sand in the separator, collect the reusable sand and drop it into the sand storage tank. Unqualified sand and dust are discharged into the dust removal box through the dust discharge pipe. 6 is equipped with an independent dust removal box and dust removal fan, which can effectively clean and collect the dust scattered inside the room to prevent dust pollution.

Minimum Order: 1 bags

Ultrasonic Tire cleaning machine by ultrasonic generator will be higher than the 20KH frequency of the shock signal power amplification by vibration through clear medium acoustic radiation. The cleaning liquid molecules vibrate and produce numerous tiny bubbles in an instant and high pressure blasting surface generated thousands of atmospheres and the cavitation effect. Attached to the dirt automatic peeling off the surface. Not only replace the traditional manual brushing, but also makes the workpiece to be cleaned by cleaning the full range of 360 degrees, which is the traditional manual brushing cleaning effect can not be achieved, and does not damage the surface of the workpiece. With the cleaning speed, good cleaning effect, no damage to the object, reduce labor intensity and cost saving advantages etc.

Minimum Order: 1 bags

Bottled toothpick filling machine is our company developed new products. This product is controlled by microcomputer (PLC), with the packaging speed, easy operation, compact structure.

Minimum Order: 1 bags