Other Industrial Equipment

Crane Drum is a part of crane lifting mechanism which is used to full in, entwine, and store wire rope. The rope drum has consisted of drum shaft, flange type annular gear, drum hub, bearings, bearing pedestal, etc. The material of the drum is usually no less than HT20-40 cast iron, ZG25, ZG35 or Q235B, Q345B welding steel plate is also able to be the material for special needs. Advantages of Rolling Drum We can produce crane parts according to customer requirements and application conditions. Each production procedure of each part or item is checked and supervised and recorded to ensure the quality of each part or item and each unit of equipment. Specification of Rolling Drum Customers can provide their requirements, then we will design and manufacture the crane rope drum to meet the operational and safety requirements of industrial crane applications. Application of Rolling Drum Drum units applies to the large tonnage crane machinery which needs high- performance. There are many crane suppliers, but we are one of the best choices for you. We provide container crane for sale, port container crane, contact us to know cranes pdf and hoists or more.

Minimum Order: 1 bags

Rail Mounted Overhead Crane is a kind of light crane, usually used together with electric hoist, widely used in steel plants, cement plants, power plants, mining industry, food industry, chemical industry, shipyards, stone yards and warehouses and other places, the scope of use widely. Advantages of Rail Mounted Overhead Crane Lightweight structure, convenient installation and maintenance; Widely used for hoisting in different places such as factories, warehouses, stockyards, etc.; Reasonable structure and strong carrying capacity; Safe and reliable operation; Low maintenance cost and long service life. There are many crane suppliers, but we are one of the best choices for you. We provide container crane for sale, 600 ton crane, 60 ton crane, contact us to know overhead cranes and hoists or more.

Minimum Order: 1 bags

Rail mounted quay crane(also called RMG crane) is a type of large dockside gantry crane found at container terminals for loading and unloading intermodal containers from container ships. It is manufactured to individual customer needs in a variety of different stacking heights and spans. Advantages of rail mounted gantry crane Exceptional anti-sway performance Increased productivity compared with alternative designs Low maintenance and spare part costs Smooth gantry operation Improved performance where high in-service winds prevail Optimum design for automation In-house expertise and excellent after-sales service Lower energy costs Zhonggong rail gantry crane features 1. Rail Mounted Gantry Crane is widely used together with winch or trolley for lifting device. It is a medium and heavy size crane which travels in track. 2. It is constituted by main beam, support legs, crane traveling organ, trolley travel mechanism, electric equipment and operation cab. 3. It is a regular crane widely used in workshop, storage, port and hydroelectric power station and some other outdoor place, where it has a high frequency or more lifting times. 4. Its proper lifting weight is 5 to 160 tons,and proper span is 18 to 35 meters. 5. Power is supplied by cable or slide wire. 6. Its proper working temperature is -20--+40 centigrade. It is prohibited for lifting melt metal, flammable, explosive, corrosion, overloading, dust and other dangerous operations. 7.Customized design based on your specific applications is available. Grab bucket, container spreader, and other special lifting devices can be equipped to do special material handling work. 8. High efficient, with the work class high up to A5( Medium) and A6( Heavy). 9. Three control modes for your selection: cab control, remote control, floor control. Rail mounted gantry crane design Zhonggong provides professional rail mounted gantry crane for sale, our rmg cranes brings together decades of experience in crane design to achieve high performance, high reliability and operational accuracy, while significantly reducing operating costs and energy consumption. We can tailor rmgc crane to your specific operational needs. (1) Main beam structure The main girder structure is composed of two box end girders and the frame girder is supported on the rigid and flexible legs. At present, the partial rail box beam is often used, the high strength bolt or welding method is used to connect the main beam and the rigid leg, and the twisted connection mode is used to connect the flexible leg. For the convenience of installation of rmgc cranes, the connection between the main beam and the end beam is generally connected by high strength bolts. (2) Door leg structure For small and medium span rail container gantry crane, both rigid and flexible door legs adopt box structure. For the long-span crane, the three-degree-of- freedom dumpling connection is adopted for the connection between the flexible leg and the main beam, and a synchronous detection device is set up. (3) Trolley structure The structure of the running trolley is different according to whether the hoisting mechanism is of wire rope drum type or telescopic rigid frame type, and the combined structure of box girder and grid is generally adopted. The structure of the running trolley takes into account the arrangement of the hoisting mechanism and the running mechanism of the trolley, and has a certain stiffness. There are many cranes suppliers, but we are one of the best choices for you. We provide container crane for sale, overhead and gantry cranes, contact us to know rail mounted gantry crane specifications or rail mounted gantry crane price.

Minimum Order: 1 bags

The quayside container crane is a gantry crane installed in a large wharf for loading and unloading ship-carried containers from ships. The quayside crane consists of a supporting frame that can travel on rails. The quay container crane is different from the general crane. The quayside container crane is equipped with a special spreader instead of a hook. The spreader can be locked on the container to play a lifting role. Quayside container cranes are often used in railway freight yards, ports, open warehouses, container transfer stations, etc. Packing Of Quayside Container Crane Electrical components are packed in high-quality plywood crates to reduce deformation during transportation. The main beams, end beams, and other parts are packed with plastic woven cloth. It can reduce wear and tear during transportation. If the size of the entire crane is suitable for a container ship, container transportation is usually used. There are many port crane manufacturers, but we are one of the best choices for you. We provide container crane for sale, overhead and gantry cranes, contact us to know quay crane price or more.

Minimum Order: 1 bags

Gantry container crane Portal Crane is indispensable lifting equipment for ports, shores, and wharfs, and they play a vital role in the efficient operation of wharfs. Portal Crane mainly includes Port Container Crane, Container Handling Crane, Container Gantry Crane, Quayside Container Crane, Rubber Tired gantry crane, Ship-to- Shore Gantry Crane, etc. Portal Crane is widely used in ports, docks, container yards, stations, factories and other places. Port crane types There are many ways to classify port cranes, and the following table is divided by purpose. Stacking cranes system "Stacking cranes, also called stackers, are the most important lifting and transportation equipment in a three-dimensional warehouse and a symbol that represents the characteristics of a three-dimensional warehouse.The main function of the stacking crane is to move back and forth in the aisle of the three-dimensional warehouse, store the goods at the entrance of the roadway into the compartment of the shelf, or take out the goods in the compartment and transport it to the entrance of the roadway." The main function of the stacking crane is to move back and forth in the aisle of the three-dimensional warehouse, store the goods at the entrance of the roadway into the compartment of the shelf, or take out the goods in the compartment and transport it to the entrance of the roadway. Features of stacking crane 1. High work efficiency. Stacking cranes are special equipment for three- dimensional warehouses, which have high handling speed and cargo storage and retrieval speed, and can complete storage and retrieval operations in a short time. The maximum operating speed of stacking cranes can reach 500m/min. 2. Increase warehouse utilization. Stacking cranes are small in size and can operate in lanes with small widths. At the same time, they are suitable for high-rise racking operations and can increase the utilization rate of the warehouse. 3. High degree of automation. The stacking crane can be remotely controlled, the operation process does not require manual intervention, the degree of automation is high, and it is easy to manage. 4. Good stability. Stacking cranes have high reliability and good stability when working." Types of Stacking cranes There are many classification methods for stacking cranes, the main classification forms are as follows: 1. Classified according to the presence or absence of guide rails: railed stacking cranes and trackless stacking cranes . 2. Classified according to different heights: low-rise, middle-rise and high- rise stacking cranes. 3. Classified according to different driving methods: upper driving type, lower driving type and upper and lower driving stacking cranes. 4. Classified according to different degree of automation: manual, semi- automatic and automatic stacking cranes. 5. Classified according to different purpose: bridge stacking crane and roadway stacking crane Terminal crane Terminal crane refers to the crane used for container loading and unloading of ships on the shore of container terminals. It is usually composed of H-shaped portal frame which can move horizontally along the wharf shoreline track, horizontal cantilever which can be hung on the portal frame seat and lowered towards the harbor basin, and trolley which can lift the container and move horizontally. With the increasing scale of container ships in the world, the requirements for their technical indexes are becoming higher and higher. Two main indexes are: the clearance height of operation can ensure the operation of large ships loaded with six deck containers; The extension of the cantilever can ensure the operation of large ships with an increasing number of deck container trains. There are many container crane manufacturers, but we are one of the best choices for you. We provide container crane for sale, crane wholesale, contact us to know container crane price or more.

Minimum Order: 1 bags

Profibus M12 Circular 5 Pole Connector Female B Code PUR Cable Connector Technical Data Model Number MC05C2LSBSB22RV30-PFB Connectors No. 5Pin Locking System M12×1.0 Screw Termination Soldering Color Purp , le Wire Gauge 0.34mm²(AWG 22) Over-molding TPU Insulation Resistance ≥100MΩ Contact Resistance ≤5mΩ Pollution degree 3 Contact Plating Au(Gold) Protection Degree IP67,IP68

Tempered excavator cabin glass made for Deawoo models: DH55 - Measurements: 5mm thick, 815mm wide, 830mm height - Position: Front up, No.A - Packge details: Wooden box included/foam between the glass/belt [DEAWOO MODELS] DH55 DH60-7 DH130 DH150 DH227-7 DH200-5 DH200-7 DH170 DH215-9E DH220-9E DH258LC-7 DH220LC-9E S300LCV SLR DH220-2 DH220-3 DH300-7 DH220-5 DH258LC-V

CE Long Arm Car Dashboard Phone Mount Adjustable 360 Degree Rotating New Car Dashboard Plastic Long Arm Adjustable Car Mount Holder Phone Product Desription :​ [3 in 1 & Multi-Function] Car phone holder equipped with ventilation clips and super strong suction cup, it can be flexibly fixed on the dashboard, windshield or vent. 100% simple and robust. [Superior Suction Cup] The holder uses super suction cups and high temperature resistant gel, which can be well absorbed on the surface of windshield and dashboard, it can offer excellent stability even when driving on rough roads. Easily removed by pulling on the suction cup without leaving any traces. [Infinite Viewing Angle] Highly flexible ball joint rotates 360° to provide an infinite view, the telescopic arm can be stretched and adjusted to the perfect position, allowing you to enjoy a more relaxed drive. [One Hand Operation] Simply press the clip arms on both sides to pop them open or lock them, and you can put in or take out your phone in a second. Truly one-handed operation for easy and safe driving. [Universal Compatibility] Blukar universal car phone holder is compatible with all 4.0-6.7 inches mobile phones, such as 13/13 Pro/12/12 Pro/12 Pro Max/SE2020/11/XS/XR/7/8, Galaxy S9/S10/S20, Huawei P30/P30 Pro/P40, Oneplus 5T/7 Pro/8T, etc.

Product Name Custom Machined Parts Knurling Wheel Materials Aluminum Alloy Color Silver Size Customization Sample Available Application Automatic Production Line of Solar Panel The knurling wheel is a customized parts of solar panel automatic production line. It is with high precision and perfect surface. We are good at high-end non- standard machined parts processing. Materials of Knurling Wheel Aluminum Alloy Surface Treatment of Knurling Wheel Anodic Oxidation Custom Method & Procedure If you are interested in the custom machined parts knurling wheel, please contact our sales and provide drawings or samples.

Anping Tailong Cheaper hot selling product Metal Frame Wire Mesh Garden Farm Fence Chain Link fence The frame fence mesh is also called "border type anti-climbing welding net", "frame isolation grid" and so on. The framed fence mesh has excellent impact resistance and doubles the resistance of the general fence. Fence mesh are widely used in China's highways, railways, etc.

20T Conventional Heavy Duty Lathe Machine Horizontal Lathe Main Features: This series lathe guideway width is 1100mm, and max. loading weight between two centers can get to 10T. These lathes can perform to turn end faces, cylindrical surfaces and internal holes as well as metric, inch, module and pitch threads. The top slides can be operated individually by power for cutting short taper surface also, can be turned automatically through the compound movement combining longitudinal feed with the top slide feed, moreover, the machines may be used for drilling, boring and trepanning. They are characteristics of power, high spindle speed, high rigidity. The various ferrous and non-ferrous metals parts may be turned through the heavy cutting by carbon alloy tools. Standard Accessories: 4-jaw chuck; steady rest; follow rest; dead center; center sleeve; working lamp; coolant system; foundation screws; tools; english manual;

QC11Y/K Series Hydraulic Guillotine Shearing Machine 1.The second generation of shear. 2.Welded steel plate construction, heating to eliminate stress,with high strength and good rigidity. 3.Advanced integrated hydraulic system with and excellent reliabitity quality. 4.Rapidly,accurately and conveniently adjusting the blade clearance by motor 5.The adjustable rake angle can minimize plate deformation. 6.As the cutting beam has been designed in inner-inclined structure,it is easy for plates to fall down and the accuracy of products can be also guaranteed. 7.Shearing in sections,shadow-line cutting. 8.Counter for the motorized back gauge. 9.Back support device (optional). Character 1. All welded structure, vibrating treatment of ageing for removal of internal stress, with good rigidity stability 2. Integrated hydraulic transmission system, with good reliability 3. Triple support rolling guide rail to eliminate gaps of support and enhance shearing quality 4. Back gauge use intelligent digital display device, shear quantity can be automatic counted, distance of back gauge can be set according to requirements of customers 5. Clearance between shearing blades adjusted by hand wheel to be quick, accurate and convenient 6. Rectangular blades with four cutting edges to prolong working life, adjustable shearing angle to reduce deformation of the sheet 7. Upper blade holder has inward tilting structure to facilitate material feed in and also enhance accuracy of the work piece 8. Function of shearing in sections, function of lamplight illume device 9. Optional rear material holding device Metal cutting machine swing machine, steel plate cutting machine, cnc cutting Metal cutting machine e10 manufacturers, electic component, electric guillotine shear

MIG-250 PULSE is a new generation innovative item, which is designed for easy welding. Inbuild Synergy mode and MIG setting mode, no matter what your welding skill, you can weld perfect effects. 4 rolls driven separated wire feeder, 15kg coil IGBT technology Multi-process including MIG/LIFT TIG/MMA functions It can weld many different kinds of material, mild steel, stainless steel, aluminum, copper and ect. Pulse welding, spot welding TECHNICAL PARAMETERS UNIT MIG-250 PULSE Rated input voltage V AC380V±15% 50/60 Rated input power KVA 9.5 Output current range A MIG:40-350 MMA:30-300 TIG:10-300 Duty cycle % 250A 60% / 194A 100% Wire feeder Integrated Wire feeding speed m/min 2-18 Welding plate thickness Mm 0.5-6 Feeding wire diameter 0.8-1.2 Machine dimensions Mm 820 x 510 x 800 Net weight Kg 44

NOTE: (1-1) Inlet water temperature (2-1) Caution: Wrong input voltage may probably cause miner damaged (2-2)Three-phase AC input wires, 10A per wire (2-3) Operation altitude is recommended below 2000m Specification for High Harshrate Antminer S19 Pro+ Hyd 198TH/s Bitcoin BTC Blockchain Miner as below: Product Glance Value Version Model No. Crypto Algorithm S19 Pro+ Hyd. j0-10 SHA256 Hashrate, TH/s 198 ±3% Power on wall @35°C, Watt(1-1) 5445 ±5% Power efficiency on wall @35°C, J/TH(1-1) 27.5 ±5% Detailed Characteristics Value Power Supply Power supply AC Input voltage, Volt(2-1) 342~418 Power supply AC Input Frequency Range, Hz 47~63 Power supply AC Input current, Amp(2-2) 30 Hardware Configuration Networking connection mode RJ45 Ethernet 10/100M Miner Size (Length*Width*Height, w/o package), mm 410*196*209 Miner Size (Length*Width*Height, with package), mm 570*316*430 Net weight, kg 15.20 Gross weight, kg 17.50 Environment Requirements Operation temperature,°C(2-3) 0~40 Inlet water temperature,°C 20-40 Water flow L/min 8±10% Water pressure bar ≤3.5 Storage temperature, °C -20~70 Operation humidity(non-condensing) , RH 10~90%