Other Industrial Equipment

Even carrying through regular maintenance carefully installation and operation, the insulation oil may also be contaminated. The electrical equipment would fall in troubles as the declining of the oil’s insulation trait. The expenses and time spend in maintenance of the electrical equipment would far more than that of the insulated oil. The use of Vacuum Transformer Oil Purification and Regeneration Plant is necessary, which will help you maintain optimal oil cleanliness. VFD-R series is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters, and remove colloid, pitches and sludge etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, cable and capacitors which has insulation system.

NSH VFD series is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, cable and capacitors which has insulation system. VFD series specialize in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil.

Minimum Order: 1 bags

Under effect of heat and electric field, the exposure of insulation oil contained trace water, gas and particulate matters etc. The use of Full-automatic Double-Stage Vacuum Transformer Oil Purifier is necessary, which will help you maintain optimal oil cleanliness. The series utilize the brand Programmable Logic Controller and alarms and interlocks to provide a fully automatic operation. Manual control of various functions is provided as required. Several Pilot Lights are provided to indicate operational status of key components and alarm conditions.

Minimum Order: 1 bags

Air Cooled PMAC Motor 0-3000rpm For Industrial Automation Air Cooled PMAC Motor 0-3000rpm for Industrial Automation Product Description Due to the use of a permanent magnet to provide a magnetic field, the rotor process is mature, and reliable, its size flexible, and its design, and power range from dozens of watts to megawatts. At the same time, by increasing or decreasing the number of permanent magnets in the rotor, it is easier to change the number of poles of the motor, so that the speed range of the permanent magnet synchronous motor is comparatively wider. With the use of a multi-pole permanent magnet rotor, the rated speed can be as low as a single digit, which is difficult to achieve by ordinary asynchronous motor. Especially in the application environment of low speed and high power, a permanent magnet synchronous motor can adopt multi-pole direct drive at low speed. Compared with an ordinary motor plus speed reducer, the advantages of a permanent magnet synchronous motor are prominent. High-efficiency NdFeB permanent magnet is adopted, with no excitation loss. Special rotor structure design has greatly reduced iron loss and stray loss. The motor efficiency is above IE4 standard, Compared with the three-phase asynchronous motor, the efficiency is improved by 5-10% and the power factor is increased by 10-15%. High efficiency and high power factor can be maintained in the load range of 20% to 120%. The power factor can be 1, while a three-phase asynchronous motor can only reach 0.86, it effectively reduces the cabling loss and improves the utilization rate of the power grid. Energy saving is more significant under light load.

Due to the rapid increase in the need of energy source, more people start to become interested in Renewable & Eco-friendly Energy especially for agricultural countries. It is our new renewable product which can generate clean and useful gas with the materials of agro-wastes and wood wastes, such as straw, cotton stalk, corn stalk, peanut shell, wood shavings, wood chips etc.

Minimum Order: 1 bags

This machine is controlled by PLC and has the function of automatic shutdown of sealing. It is a fully automatic two-in-one printing machine, suitable for printing non-woven bag paper.

Minimum Order: 1 bags

Widely used for cutting thick materials such as wood, plexiglass (acrylic), plastic and other non-metallic materials, high-precision guide rails and high-speed stepping motor for moving parts; embedded computer control, DSP digital high-speed processing technology, offline operation, humanity Operation interface. It can store up to 128M processing files, and the laser power and engraving cutting speed can be controlled freely, and the cutting precision is high. It is the best choice for non-metallic materials laser cutting industry and laser processing center. Applicable materials: Wood products, plexiglass (acrylic), bamboo, cloth, leather, paper, rubber, synthetic materials, etc. Applicable industry: Advertising industry: trophies, licensing cards, two-color plates, acrylic processing, etc. Office industry: processing of menus, recipes, tenders, invitations, personalized business cards, etc. Gift industry: water cups, bamboo slips, fan and other crafts processing Printing industry: rubber, printing Clothing industry: clothing, cloth, leather decoration

Minimum Order: 1 bags

This machine is mainly used for the mixing and foaming work of foam raw materials. It adopts frequency conversion double-stage stepless speed regulation, high-speed section automatic timing function, with automatic brake unit system, stable foam quality and simple operation.

Minimum Order: 1 bags

1)This equipment is mainly used to dismantle the electronic component from PCB of computer, TV set, and other electrical application facility. The PCB is heated to 200℃ to melt solder. The inner drum will spin out the solder and electronic component through 20mm*20mm screen from PCB board inside the drum. Then, the solder will be separated from the electronic component through vibrating screen 5mm*5mm. Solder recovery rate is 80%, and the purity is 60% as there is small pieces electronic component inside the solder. The recycled solder will be refined in an electrical resistance furnace to get the purity of 95%. 2)Compared with manual way, this dismantling equipment is automatical operation, high efficient, low cost, small covering area, easy operation, and no dust pollution. The PCB after dismantled, called base board, can be recycled by physical methods to get copper and other non-metal material. The dismantling rate can be to achieve 95%. 3)And its shell is double-layer and heat preservation.

Minimum Order: 1 bags

1)The machine use a percentage abrasive sand and water mixture, so there is no dust pollution to the work place, and the problem of the harm to workers health and abrasive recycling also greatly reduces the consumption of abrasives. 2)This function complete cleaning malleable cast parts, welding parts, heat-treated parts, stampings, and the rough surface of mechanical product, and the scale, the salt and burr, used for pretreatment process before spraying, electroplating, etc. 3)The machine is suitable for medium and small parts sheet small batch production. 4)Mold processing: mold surface and matte treatment, graphic production, as well as die cleaning, will not hurt the die surface, ensure accuracy of mould

Minimum Order: 1 bags

Air shower room is used for sterilization and disinfection in factory workshops

Minimum Order: 1 bags

Subcritical fluid extraction is a fluid diffusion separation and extraction technology. Compared with supercritical CO2 extraction technology, it has the advantages of low operating pressure, simple process, low energy consumption, low investment, and easy industrialized mass production. It can solve the defects of small volume, high cost, high energy consumption and large scale industrial production of supercritical extraction equipment. Compared with traditional solvent extraction, subcritical fluid extraction has the advantages of normal temperature extraction, low temperature desolvation, protein invariance, non-oxidation of oil, no destruction of active ingredients, easy removal of solvent, and reduced emissions of “three wastes”.

Minimum Order: 1 bags

This wooden dowel making machine used for making round rod into dowel shape and the automatic cutting machine used for cutting the wooden dowel.

Minimum Order: 1 bags

The main molding equipment for producing various shapes of plastic products using plastic molding molds for thermoplastic or thermosetting plastics.

Minimum Order: 1 bags