Other Industrial Equipment

stripping speed:130mm/sec Label height:4-300mm label width:5-100mm Straight tube inner diameter:20／50mm or more The maximum diameter:Within 300mm power supply:110/220V 50/60Hz weight:3.6Kg Product Size:280x136x174mm

Minimum Order: 1 bags

Dimensions :1600 X 1300 X 1300 Weight:450 kilograms Total power:370w Voltage :AC 380 V Motor:2200W Switching power supply :50W24V Spindle :￠ 40 Load capacity:300 kilograms Installation cone diameter:80mm Dual cylinder clamping device:suitable for spool diameter of 500-800 and width of 400-600 Sliding rail travel:700mm, storage wheel diameter of 200, customizable for a total of 7 pieces Gearbox:One RV75, 10 ratio, lifting motor 200w with RV 40 gearbox Forward and reverse control, motor frequency conversion brake, adaptive speed control slider position. The higher the position, the faster the motor speed. Conversely, when it falls, it has anti knot induction and can be connected to the front wire stripping machine to stop together.

Model Number：HL-100T Voltage：AC220V50HZ workin , g capacity：3000pcs/h Weight：10kg dimension , ：300-250-220(mm) Fine thread：28-22# thread Coarse thread：14-22# thread

Minimum Order: 1 bags

Function:Wire winding, Round Coil, Flat bunch, Single/Double Bundle Tying Wire Diameter:≤φ3.3mm Tying Diameter:<20mm Bundle Diameter:45-80mm Front Side No-coil:20-60mm Rear Side No-coil:30-130mm Productivity:1200pcs/hr Dim , ensions(L x W x H ):1040x800x1560mm Power Supply:AC220V, 50/60Hz Features:Most suitable machine for wire and cable industry. With these machines, you will be able to bundle most of cable and wire products with large or small inner diameter iron core string. AC power cable DC power cable Headphone cable Audio cable USB data cable Video cable HDMI high-definition lines and other transmission lines Rubber core seal Bathroom rubber hose Clothes-hanger etc.

Minimum Order: 1 bags

Product Description power supply：220V/50HZ Tape width：7-50mm Cutting length：20mm~999mm Maximum outer diameter of tape：170mm Tape inner diameter：22mm/28mm/74mm size：137x218x150mm& , lt; , br>weight：2.4KG

Minimum Order: 1 bags

Product Details: Equipment name: Single-point tape wrapping machine Machine model: HL-303A/HL-TP03 Applicable tape length: 30-50mm Applicable tape width: 25-45mm Air pressure: 0.4MPa Power supply: 220V/110V Machine weight: 48kg Machine size: 53cm*40cm *51cm (length, width and height)

Minimum Order: 1 bags

Tape width:2-40mm Taping length:0-600mm/second Wire diameter:0.1-40mm Installation 1. Place the harness taping machine to the working area. 2. Make sure the machine is horizontal before fixed. 3. Conect the power cabel with foot switch. Operation 1. Put the tapes into the tape rack. 2. Turn on the machine with "ON/OFF" button. 3. Select an operation mode with "AUTO/MANU" button. 4. Set a required speed. 5. Rotational speed should be defined under AUTO mode

Minimum Order: 1 bags

stripping range： Front end stripping 0-10MM Back end stripping 0-10M Cutting wire tolerance：When the wire length is ≥ 1000MM, ± 0.4%. The longer/thicker the wire, the greater the tolerance cutting length：70-9900MM (56MM customized） press strength： Standard 2T30 stroke (optional 3T/4T)/(optional 40 stroke） Adapt to wires： AWG14-26 # 1007 single electronic wire Applicable casing：tube diameter: D3.0-D6.0 tube length: 15-28mm Adapt applicator ：OTP applicator (optional European mold, flag applicator) Electrical support: AC 220V 2.8Kw Air：0.4-0.6MPa

Minimum Order: 1 bags

Features: 1. The brushing twisting machine can be used for the data line shielded wire shielded cable brush, straightly brush to facilitate the post-processing, the brush wire plate is divided into copper wire brush / nylon brush 2. The distance between the brush rollers can be adjusted according to different wires. .Advantage: * The brushing machine is mainly used for processing of braided shielding of wire and cable. * The brushing tray is divided into copper brushing and nylon brushing. * The distance between the brush rollers can be adjusted according to different wire sizes. Split length:5-60MM Function:brushing twisting

Minimum Order: 1 bags

Characteristic Description 1. Full touch screen computer numerical control debugging, digital operation completed, simple and easy to understand. 2. Easy to operate, enter the required total length to start the job. 3. Unique appearance, round and precise design, exquisite and compact, easy to place. 4. This machine is designed for bi-directional blade cutting, with high speed block accuracy and smooth cutting surface without burrs. It is specifically designed for cutting heat shrink tubes and yellow wax tubes. Product specifications Input power supply:AC220V50/60HZ Body size: L365mm*W450mm*H315mm Body weight:21kg Whole machine power: 400W Rated power: 200W Cut pipe diameter:Ø1-Ø6mm cutting length:0.1-99999.9mm blade width: 22mm Blade material:Imported tungsten steel Capacity/hour:18000 Cutting accuracy: Silent hybrid stepper motor 0.01mm Display mode: 4.3-inch color screen display

Minimum Order: 1 bags

《Machine functions and features》 Fully automatic frequency tracking function, air-cooled automatic balancing circuit, automatic detection function of mechanical module failure and alarm display Multi-level amplitude adjustable PLC control mode, welding time accuracy up to 0.001 seconds 1: Amplitude mode 1x1: A-segment amplitude 1x2: B-segment amplitude 2: Vibration drop amplitude 3: Working mode 4: Trigger mode 5: Delay time 6: Ultrasonic time 7: Ultrasonic energy 8: Ground holding time 9: Cooling or solidification time model：HL-DS400 power ： 2500W frequency ： 20KHz Operating Voltage ：220VAC±10% 50-60Hz Rated current:6.5A rated power:2500W Peak power:2400W Fuse protectiaon current : 20A ambient temperature : -10 to +55°C Protection level : IP 20, IEC 60 529, EN 60 525

Minimum Order: 1 bags

Product Description Full Automatic crimping machine , Including dismantling the out jacket, insulation wire, crimping ,the plug inserts, used  for flat cable H03VVH2-F and H05VVH2-F only.with CE mark. Three functions of wire stripping, automatic feed and pressure connection in one, completed once for all.3-4 labors are saved compared with original operating mode, reducing labor and improving output. Model of machine :HL-CX04 Pressure connection speed:2000-2300 PCS/Hour Punching Force:3T Voltage:AC220V/5 , 0HZ Pressure of air source:0.5-0.8Mpa Wei , ght:375KG Dimension:1150mm*700mm*1480mm

Minimum Order: 1 bags

The waste to oil pyrolysis plant can convert a variety of wastes into energy through high-temperature pyrolysis, such as waste tires, rubber, plastic, oil sludge, cable skin, medical waste, domestic waste, etc. The process is environmentally friendly and pollution-free, and can achieve energy recycling. Waste to oil pyrolysis plant is an innovative solution that transforms waste materials into valuable oil products. This advanced pyrolysis plant is designed to efficiently convert waste into pyrolysis oil, carbon black, and steel wires, all while adhering to the highest environmental standards. Our plastic pyrolysis plant not only offers a sustainable approach to waste management but also provides a lucrative opportunity for businesses looking to tap into the recycling industry.

The refining of waste aluminum and plastic mainly uses a high-temperature cracking process to fully crack the high-molecular polymer of aluminum and plastic, returning it to a small molecule or monomer state, thereby producing high value products such as aluminum ingots, fuel oil and carbon black. Under the premise of safety, environmental protection,  and stable operation, waste aluminum pyrolysis plant realizes the resource utilization, harmlessness and reduction of aluminum and plastic products.  Features of Aluminum Plastic Pyrolysis Recycling Process • High conversion rate: The aluminum plastic pyrolysis refining process has a high conversion rate, which can convert most of the organic elements in aluminum plastic into high value products. • Environmental protection: The waste gas and waste water generated during the pyrolysis process can meet the environmental emission standards after treatment. • High economic benefits: The aluminum plastic pyrolysis refining process can convert waste aluminum plastic into high value products such as fuel oil(About 50%) ,  aluminum ignots(About 20%) and carbon black(About 20%).