Industrial Machinery & Equipment

Insulation block benzene board insertion device The thermal insulation block plug board device comprises a fixed frame placed horizontally, a pallet is placed horizontally on the frame of the fixed frame, a movable frame powered by a driving oil cylinder is embedded in the fixed frame, and a movable frame is provided on the movable frame for pushing the pallet The moving push plate teeth, a driving shaft system is arranged under one end of the fixed frame, the driving shaft system is connected with the driving equipment used to provide power, and a driven shaft system is arranged under the other end of the fixed frame, and the driving shaft system is connected with the driven shaft. The systems are connected by two transmission chains. The two transmission chains are located on the outer sides of the two long sides of the fixed frame and are parallel to the two long sides of the fixed frame. The sides are respectively connected with a transmission chain, and the benzene board tray is provided with a positioning groove for positioning the benzene board. It solves the complex structure, low production efficiency, unreliable operation and potential safety hazard for operators in the existing board board device. The problem. The concrete small hollow block benzene board thermal insulation composite wall has a simple structure, and blocks are used as load-bearing walls and protective walls on the inside and outside of the outer wall respectively, the benzene board is sandwiched in the middle, and the knotted mesh is placed on the inside and outside of the external wall. The main technological process is: leveling the elastic wire, arranging the blocks, laying the outer side of the outer wall, inserting the board, placing the mesh that is tied with the outer wall, and finally laying the inner side of the outer wall. This process is repeated continuously. During construction, attention should be paid to the treatment of block benzene board composite thermal insulation walls, core columns and special parts.

RTQT12 Block Making Machine RTQT12 automatic concrete block making machine can produce standard bricks, hollow blocks, porous bricks, standard bricks, various roadside stones, thermal insulation bricks, slope protection and dam protection by replacing the mold. With a secondary distribution device, it can produce colored pavement bricks, grass-planting bricks, dock bricks, water conservancy bricks, decorative bricks, etc. Choosing this china block machine as production equipment can bring benefits to users as follows: 1.Suitable for a wide range of raw materials Adjust various parameters of the equipment (exciting force, pre vibration time, main vibration time, distribution times, etc.) through computer program and adopt scientific and reasonable process formula to make the equipment adapt to different raw materials and produce products with different quality requirements. In addition to using tailings, fly ash, coal gangue, slag, steel slag and various industrial wastes can also be used as raw materials. 2.High product quality Forced mechanical positioning and synchronous steel beam design are adopted to make the overall dimensions of the product accurate and consistent during demoulding.Electromechanical hydraulic integration technology is adopted to make each cycle process of equipment operation consistent, so the stability of products is very high and the scrap rate is low. The mode of bench mold resonance is adopted to make the produced products more dense. 3.Low product cost The use of high-frequency vibrator vibration molding can make the material particles rotate and vibrate fully, the cement slurry is wrapped evenly, and the bonding effect between particles is good. Therefore, the block made with the same amount of cement has high strength. Similarly, for blocks with the same strength, the amount of cement is less, which can reduce the production cost. The whole machine adopts hydraulic action, which saves power consumption and reduces power consumption by about 5 to 10kW per hour compared with general mechanical transmission equipment. As the molding host is independently developed on the basis of German advanced technology, with a high degree of automation, and the key components adopt international brand products, the reliability and stability of the equipment are greatly improved. With this production line, there are fewer operators, less equipment maintenance costs and high production efficiency, which can reduce the product cost. 4.Good after-sales service Provide first-class whole process service to customers: help prepare scheme, feasibility analysis report, site layout and train operators; Free installation and debugging, providing reference formula, guiding production on site and providing enterprise management software; The warranty period is one year, the long-term affordable supply of molds and spare parts, and the itinerant engineering service mode make the equipment run in good condition. Promise to provide 24-hour timely service and lifelong after-sales service. 5.Equipment is widely used By changing the mold, it is possible to produce a variety of brick shapes and realize a variety of uses for one device Introduction for RTS6C block brick making machine with wholesale price 1) STATIONARY BLOCK MACHINE REIT- RT6C RT6 CAPACITY/PER PALLET : - 6 HOLLOW BLOCKS 400×200×200MM PALLET SIZE : - 900×700×25MM PVC WORK AREA : - 820×650MM PRODUCT HEIGHT : - 50-220MM OPERATION CYCLE : - 15~30S VIBRATION MOTOR : - 2×7.5KW OSCILLATION FORCE : - 100 kN MACHINE WEIGHT : - ABOUT 7 TON The manual brick making machine can be universally used for the manufacturing of pavers with and without face mix, kerb stones, hollow blocks and similar elements. BODY The block machine for sale in usa is built of strong section steel with 2 guiding columns with which the mould moves up and down. The seat of mould is equipped with synchronized connecting rod so that both sides of two end of mould is up and down synchronously. The mould and mould head linked with their seat through the special rubber bush. FILLER SYSTEM The filler system is integrated one which can be moved out or into body when need. The filler box and hopper is fixed on the support frame. Their height is adjustable according to the product height. The capacity of base concrete hopper is approx 0.5 m3 and outlet is driven by hydraulic cylinder. The filler box is driven by hydraulic cylinder and the guiding rollers are inside of U rail. In the filler box there are rotating bars with sticks driven by a german made hydraulic motor , which with concrete compulsory movements can make the filling process fast and wet concrete in the mould well-distributed. As the final result the products are high quality.

RTQT18 automatic block production line is designed, developed, processed and manufactured by REIT company on the basis of technology and process and in combination with the application of Chinese users. All key electronic control components, motor reducer, hydraulic pneumatic and other components are all foreign products, so as to ensure the high reliability of equipment operation. The equipment is more humanized in appearance design, structural design and convenient operation, which is more suitable for the use requirements of Chinese users. The performance of the cement block making machine for sale has reached the level of similar foreign products, which belongs to the general equipment for processing concrete products with excellent performance. The core technology for stable operation of RTQT18 across the board: 1.Batching system The mixing system is fully automatic weighing, adopting the vertical planetary forced mixer which is most suitable for the production of dry and rigid concrete products, so that the mixing is even and fast.Microwave hygrometer ensures accurate water cement ratio. 2.The molding system Patented multi-axis high frequency vibration technology, with suspension vibration table to amplify the vibration power, so that the product uniform and dense. Demoulding brake device, pallet positioning device, from the details to ensure the quality of products. Hydraulic driven fast forced distribution device, durable. The application of low speed cruise technology, motor temperature control, prolong the service life. 3.Palletizing system According to the program this device transfer the pallets with wet products and stack them automatically, two pallets once. A frame with a gantry structure, a set of driving wheels and a set of driven wheels span the two sides of the frame body, and a liftable hanging lug is set on each of the two sides of the frame. The overall front and rear movement of the pallet truck and the lifting and lowering movement of the hanging ears are driven by the motor reducer and driven by the double-row roller chain. The hanging lug and its supporting body are hinged and can be flipped in one direction to adapt to the return process during automatic stacking. The mobile palletizer is controlled by the PLC program, which can automatically take the board according to the set parameters (number of stacks, the number of layers per stack), and automatically stack it from far to near. The stacked product stacks are transferred to the curing room by forklift trucks. The stacking level control is realized by a highly sensitive proximity switch with a prefabricated sensing block. Stacking layers and pick-and-place heights are precisely controlled by rotary encoders. In order to improve the working reliability of the equipment, a photoelectric switch is provided to detect the stacking position in time, and at the same time, it plays a role in safety protection of the equipment. 4.Transport system Unique 12-layer car design, the use of multiple positioning and frequency control technology combined, so that the transport process is smooth and accurate. Combined with safety technology such as self-lock and interlock, realize unattended production process. 5.Control System The control system controls the entire production line, including: electric control cabinet and console. The whole control system adopts Siemens programmable logic controller (PLC) to complete the operation control of the complete set of equipment, which can realize automatic, semi-automatic and manual operation. There is an operation terminal on the control panel, and the operator can conveniently set or change the operating parameters of the equipment on the operation console. The control system has the function of storing a variety of different product data, and the stored data can be adjusted, modified and optimized arbitrarily, so as to reduce the debugging time after replacing the product. Components use internationally renowned brand products, such as Siemens, Schneider, Toshiba and so on. Provide English operating instructions and English interface of the control system.

The automatic concrete block making machine is made by three main parts, including base concrete feeding device, face concrete feeding device and compacting system. For the fourth version of REIT QFT15, base concrete feeding device and face concrete feeding device can be moved independently, in order to adjust and fix machines easier. The cinder block machines improvement provides more space for workers to operate, maintain and adjust machines. It can be universally used for the manufacturing of pavers with and without face mix, kerbstones, hollow blocks and similar elements. Pos.1 Green Block Conveyor It is used for transporting the pallets with green blocks to the chain elevator orderly. It includes transferring device inside and crawl conveyor. The transferring device inside is parallel four rod structure and is driven by cylinder, so it works more stable. The crawl conveyor is combined with stationary bucket and movable frame. The moveable frame can move the pallet horizontally for one pitch in one cycle. The movement of frame with gear and rack mechanism is driven by electric motor controlled by frequency controller. The beginning and stopping position are controlled by a highly sensitive switch. In the end of the movement, there are a forced machinery limitation and protecting device for ensuring the quality of products. Main parameter: Distance transferring device moves: 120mm Driven motor: 4kw Transport speed: 0.20—0.48m/s Pos.2 Rotate Brush for Green Block It is for clean of the fresh products. The body of brush is the high strengthened whirling nylon brush, and is supported by steel frame. The height of brush can be adjusted according to the height of products. It is driven by a speed reducing motor and chain. Main parameter: Driven motor: 0.75kw Dimension of thread: 0.4-0.5mm Speed of whirling: 137r/min Pos.3 Chain Elevator with 12 Layers It is for lifting the pallet with green blocks to certain position and stores them as designed distance and layers. When it is full, pallets with green blocks are transferred to the curing kiln by finger car. Its frame is sectional steel design with two lateral safety grids. Supporting angles are fixed on bush roller chains. The lifting and storage device is formed by the steel hooks. The chains are working inverted synchronous which make the pallets horizontally when being lifted or stopped. The chains in the two sides work steadily. The synchronous speed transmission for which REIT has patent driven by an electric motor is equipped for ensuring the chain’s lifting synchronously. The synchronous speed transmission is equipped with auto-lock to protect from danger when the electricity is broken off. The high-quality proximity sensor controllers lifting height, and the combination of beam sensor with proximity sensor controllers the equipment working and safety protection with double protecting device. Main parameter: Driven Motor: 11kw Travel speed: 0.1m/s Stages no.: 12 Pallets per stage: 2 Stage distance :400mm

For each hydraulic Screw-in cartridge valve, hydraulic cartridge valve manufacturer AAK conducts very strict quality inspections from raw materials to shipment, and the inspection processes is roughly as follows: 1. Raw material inspection The raw material manufacturer provides material analysis reports to hydraulic cartridge valve manufacturer AAK, and AAK regularly entrusts third-party organizations to conduct material analysis. 2. Inspection of purchased finished products outside For some components that hydraulic cartridge valve manufacturer AAK purchased outside, such as the coils, O-Rings, TPE back-up rings etc, the component manufacturer provides material reports and inspection reports to AAK, and AAK conducts size sampling before storage. 3. Self made semi-finished product inspection For each component that is produced in our own factory, hydraulic cartridge valve manufacturer AAK inspects the full size of the first piece, then run into mass production. During production, process full-size inspection; After production, process full-size inspection according to proportion randomly. 4. Inspection after heat treatment Key dimensions are randomly inspected, and the outsourced heat treatment manufacturer provides hydraulic cartridge valve manufacturer AAK a metallographic analysis report. AAK conducts metallographic analysis on each batch of outsourced heat treatment materials through sampling in a third party. 5. Inspection of self-made finished products Full inspection of precision machining dimensions, grinding and matching. 6. Assembly inspection Random inspection 7. Finished product testing before shipping All products must pass 100% performance testing before being stored or shipped. 8. Delivery inspection Fully inspected shipped materials consistent with the order requirements. 9. Fatigue Test Each product is scheduled to undergo durability testing, record and track relevant data, and mass produce after passing the inspection. AAK HYDRAULIC VALVES (843) 2025-03-11

Minimum Order: 1 bags

RTQT9 automatic concrete block production line RT9A is fully automatic concrete block production line, universally used for producing block, brick, pave, curbstone and so on. REIT has started to produce concrete blocks making machine since 2001, via rich experience, RTQT9 has became a relatively mature equipment provides high quality block/pave. The concrete block press was developed by introducing German technology and combined with the domestic market. Its control system is at the domestic advanced level, and its performance and technical level are comparable to foreign equivalent equipment. 1.Composition of RTQT9 automatic production line. Rt9a automatic production line consists of five parts: batching and mixing system, forming system, conveying system, stacking system and control system. 1) Batching and mixing system: Bottom and fabric batching station, bottom and fabric mixer, batching weighing and conveying system, cement weighing and conveying system; 2) Molding system: Fixed molding host (including fabric device) system and plate feeding machine; 3) Conveying system: Wet product conveyor, product brush, plate lifting machine, plate lowering machine, sub parent car, pitch machine, turnover machine, pallet bin, etc; 4) Palletizing system: Full automatic palletizer, finished product conveyor and pallet bin; 5) Control system: Molding control system, product conveying program control system, batching and mixing program control system, full-automatic sub mother kiln car program control system and full-automatic stacking control system. 2.Introduction to the technical characteristics of the production line equipment of the production line: ● equipped with automatic batching system, accurate batching and convenient proportioning adjustment; ● equipped with microwave humidity measurement system, which can ensure accurate water cement ratio and product quality; ● the whole line adopts the international brand Siemens PLC program control, and has the function of computer central monitoring; ● Fuji frequency converter, an international brand, is adopted in many parts of the whole line to realize stepless speed change. Electrical components are provided by world-famous companies and operate reliably. ● the main molding machine adopts integrated vibration excitation table and fully synchronous vibration mode, which is the best vibration effect of the machine; ● adopt fast cloth technology and low-speed cruise technology to greatly shorten the forming cycle; ● the unique insulation board insertion technology realizes the fully automatic production of insulation blocks; ● it has a special mechanism for the production of large curb stones, which can produce large curb stones with a length of 800-1000mm. ● the hydraulic system adopts hydraulic components of well-known brands such as Taiwan, Japan and Italy; ● it is equipped with automatic fault diagnosis system, and the production program can be monitored on the screen; ● it has the function of remote diagnosis and repair; ● adopt international advanced welding technology and use super strong section steel raw materials to make the body firm and durable; ● wide range of products. Replace the mold and produce floor blocks, curb stones, porous bricks, blocks and other products; ● thick walled rectangular steel frame, four column guide, extended guide sleeve, solid and durable structure.

The block making machine can be universally used for the manufacturing of pavers with and without face mix, kerbstones, hollow blocks and similar elements. 1、Body. The cement block making machine is built of strong section steel with 4 guiding columns with which the mould moves up and down. The seat of mould is equipped with synchronized connecting rod so that both sides of two end of mould is up and down synchronously. The mould and mould head linked with their seat through the special rubber bush. 2、Filler System The filler system is integrated one which can be moved out or into body when need. The filler box and hopper is fixed on the support frame. Their height is adjustable according to the product height. The capacity of base concrete hopper is approx 680L and outlet is driven by hydraulic cylinder. The filler box is driven by hydraulic cylinder and the guiding rollers are inside of U rail. In the filler box there are rotating bars with sticks driven by a hydraulic motor, which with concrete compulsory movements can make the filling process fast and wet concrete in the mould well-distributed. As the final result the products are high quality. 3、Compacting system The system consists of two twin-shaft heavy-duty special synchronous vibrators fixed on vibrating table, the vibrator having 2 synchronized unbalances and generating vertical oscillations. Due to this force the vibrating table, the pallet and the mould filled with concrete, move up and down. The concrete in the mould is compacted. The vibrator is Patent product which equipped the electronic brake system (also Patent). The vibrating frequency and amplitude is adjusted according to the products and material. There are many shock absorbing pads between vibrating table and body. 4、Hydraulic station The hydraulic station consisting of a large-sized oil tank, oil pump, electric motor and cooling system is integrated together with the valve station beside of the block machine, which is separated with block machine and linked with soft heavy duty hydraulic pipes. The oil pump, valves, cylinders and element are Japanese products such as Yuken.

As global demand for renewable energy continues to rise, biomass pellets have become an increasingly popular fuel source. However, the quality and efficiency of biomass pellets depend heavily on the raw materials used. Selecting the right materials not only improves combustion efficiency but also reduces emissions and extends the lifespan of pelletizing equipment. 1. Best Raw Materials for Biomass Pellets Choosing high-quality, sustainable materials is key to maximizing the energy output of biomass pellets. Here are some of the best options: ✅ Wood Waste – Sawdust, wood chips, and shavings are excellent raw materials due to their high energy content and low moisture levels. Hardwood and softwood residues are both suitable, but they should be properly dried to enhance pellet durability. ✅ Agricultural Residues – Crop waste such as corn stalks, wheat straw, and rice husks provide a cost-effective and widely available option. However, they require proper processing to ensure a consistent pelletizing process. ✅ Energy Crops – Fast-growing plants like switchgrass, miscanthus, and bamboo are increasingly used for biomass pellet production. These crops are sustainable and provide high biomass yields per acre. ✅ Organic Waste – Palm fiber, coconut shells, peanut shells, and other organic by-products are effective raw materials. They offer high combustion efficiency and can be an eco-friendly way to repurpose agricultural waste. 2. Key Factors in Material Selection To ensure high-quality biomass pellets, consider the following factors when selecting raw materials: • Moisture Content: Ideally, raw materials should have a moisture content of 10-15% to ensure proper compression and avoid excess smoke during burning. • Ash Content: Low-ash materials (e.g., wood waste) result in cleaner combustion and require less frequent maintenance of pellet stoves and boilers. • Energy Density: High-density materials provide longer burning times and better energy output. • Binding Properties: Some materials naturally contain lignin, which acts as a natural binder, improving pellet durability without the need for additives. 3. Kawise – Your Trusted Biomass Pellet Solution At Kawise, we specialize in providing high-performance pellet mills and biomass solutions for industrial applications. Our expertise ensures that your raw materials are processed efficiently to produce premium-quality biomass pellets. Whether you are in the wood processing, agricultural, or energy sector, we help you optimize your pellet

Minimum Order: 1 bags

Cast Iron Parallel Straight Rulers are widely used for setting up, leveling machinery, for checking and spotting bearing surfaces during hand-scraping operations. They also may be used with various indicating devices to check surface flatness of large machined areas like surface plates, machine tables and beds, etc. Features of Cast Iron Straight Edge: • Made from high quality cast iron. • I-Section or Parallel type. • Casting stress – relieved to remove internal stresses. • Offered in hand-scrapped finish to various Grades. • Top and bottom faces are precision ground parallel and flat. • Offered in three Grades of accuracies: Grades 1, 2 and 3. • Supplied with fine storing case for protection and storage.   These features make HENGFENG one of the best Cast Iron Straight Edge manufacturers in the industry. SPECIFICATION: OEM or ODM service: we offer a wide range of services from standard Cast Iron Square Rulers to custom order as per request. Calibration Certificate: EX-works inspection reports offered by our Quality Inspection Department are included with every surface plate, “Calibration Certificate” is available upon request for an additional charge. Delivery Costs: calculated during the checkout process. Material: HT200, HT250, HT300 Specification: see attached form or customize Surface treatment: hand-scraped, ground finish, milling finish Surface coating: working surface covered with pickling oil and non-working surface covered with antirust paint Precision grade :1-3 Packaging: plywood box / fine storing case Warranty: 1 year

Cast Iron Box Angle Plates are made of high tensile cast iron properly seasoned against distortion, are used as a versatile tool for layout machine set – ups, tooling and inspection of large jobs. They can also be used as right angles and squares. They are made and used either in single or in combination for comprehensive applications. They meet or exceed the requirements set forth by various National and International Standards.   OEM or ODM service: we offer a wide range of services from standard Cast Iron Square Boxes/Blocks to customized and specifically designed as per loading requirement. Calibration Certificate: EX-works inspection reports offered by our Quality Inspection Department are included with every surface plate, “Calibration Certificate” is available upon request for an additional charge. Delivery Costs: calculated during the checkout process. Cast Iron Square Box SPECIFICATION: Material: HT200-300 Specification: customize Surface: flat / tapped holes / T-slots / cored elongated slots Hardness of the working surface: HB160-240 Surface treatment: hand-scraped or finish-milling Surface coating: pickling oil and plastic-lined or covered with anticorrosion paint Heat-treated: available for stress relief, stability and wear resistance Precision grade: 2-3  Packaging: anti-rust packing+ plywood box Warranty: 1 year   Features of Cast Iron Square Box: • Made from high quality cast iron. • Heat-treated for stress relief. • Offered in two grades of accuracies – Grades: 2 & 3. • Machined T-slots and cored elongated slots provided to facilitate clamping. • Special sizes as per customer’s specific requirement also offered. • Offered as matched pair. These features make HENGFENG one of the best Cast Iron Square Block manufacturers in the industry. *Custom - Designed specifically for your application. Some options include T- slots, custom hole sizes, custom patterns. Contact us for more information.

Angle Plates Slotted Open End are made of high tensile cast iron. They are ground or machined finish with open end. Slotted pattern to allow for easy flexible set-up of fixturing components. They provide a versatile means of holding work for layout, machining and inspection and also are widely used as vertical reference. All machined faces are square and parallel. They can be made in single piece or in two sections. Key Features: • Made from high quality Cast Iron. • Heat-treated for stress relief. • High strength, High precision, High hardness. • Finer accuracies can also be achieved on request at extra cost. • Slots arranged for maximum clamping versatility. • Customized and specifically designed as customers’ requirement. These features make HENGFENG one of the best Cast Iron Angle Plates manufacturers in the industry. Cast iron angle plates SPECIFICATION: OEM or ODM service: we offer a wide range of services from standard Cast Iron Angle Plates to custom order as per request. Calibration Certificate: EX-works inspection reports offered by our Quality Inspection Department are included with every surface plate, “Calibration Certificate” is available upon request at extra cost. Delivery Costs: calculated during the checkout process. Material: HT200-300 Specification: standard or customize Working Surface: flat, T-slots, slotted holes, custom hole sizes, etc. Hardness of the working surface: HB160-240 Surface treatment: hand scraped, ground finish or machined finish Surface coating: working surface covered with antirust oil and unmachined areas covered with antirust paint. Precision grade: 1-3 Type: webbed end or open end Packaging: anti-rust packing + plywood box Warranty: 1 year

Granite Surface Plates are best known due to their rust-less properties. The hardness of the granite surface plates is also more than the Cast Iron Surface Plates. They are wildly used for precision gauging, inspection, layout and marking purposes and preferred by Research Laboratories, Engineering Industries, Factory Workshops, Precision Tool Rooms, etc.   OEM or ODM Service: we offer a wide range of services from standard surface plates to custom order as per request. Calibration Certificate: EX-works inspection reports with measurement values offered by our Quality Inspection Department are included with every surface plate, “Calibration Certificate” is available upon request for an additional charge. Delivery Costs: calculated during the checkout process.   OEM Granite Surface Plate Key Features: • Almost no aging • High wear resistance, high accuracy and it can maintain for longer life • Moisture and corrosion free, no rusting, no oiling, will not stain or discolor • Low maintenance costs • Good vibration isolation and attenuation performance These features make HENGFENG one of the best Granite Surface Plates manufacturers in the industry. SPECIFICATION: Material: black granite Specification: 200X200mm up to 3000X5000mm or customized Surface: flat, tapped holes, T-slots, metallic T-slots, metallic threaded inserts, etc. Hardness of Working Surface: HS70 Surface Treatment: ground finish Stands with Leveling Screws: available on request at extra cost Precision Grade: 0, 1 Ledge Types: 0, 2 or 4 Packaging: plywood box Warranty: 1 year

3D Welding Table is designed for the manufacture of welded products; Made from high quality cast iron or steel, it has 5 precision machined working surfaces (1 top + 4 side surfaces). 3D welding table has good durability and performance, it offers you a flexible working surfaces for clamping, assembly and fabrication of workpieces with variable design to perform your welding operations. Material: steel welding table: Q355 cast Iron welding table: HT 250 or HT300 Hardness: steel welding table: HV150-210 casting welding table: HB170-210 nitrated steel welding table: HV450-500 nitrated casting welding table: HV400-500 Precision machined working surfaces: 5 (1 top + 4 side surface), can be expandable by support tools. Hole diameter: 28mm Grid spacing: 100±0.05mm Precision: table horizontal precision: 0.1/1000mm table vertical precision: 0.1/200mm drilling center accuracy: +/- 0.03mm Hole pitch: 100mm Perimeter ruler engraving: 1mm scale Side surfaces height: 200mm Be reinforced on the underneath side by ribs Surface treatment: standard/ nitrided Loading capacity: 2 tons weight loading capacity. Supporting: legs or steel frame Fixtures: 1. Tools for supporting: U-shaped cube case, L-shaped cube case, Angle supporting, and Angle gauge 2.Spare parts for locating 3. Tools for clamping and fixing 4. Spare parts for locking working pieces 5. Auxiliary tools Features OF Precision 3D Welding Table: • Superior Quality: Made from high-quality raw material, 3D welding table offers exceptional sturdiness and stability, providing a reliable surface for precise welding. • 3D Surface Design: The innovative 3D surface design ensures that the workpieces stay firmly in place, preventing any unwanted movement during welding. • Versatile Fixturing Options: Equipped with wide fixturing options, 3D welding table allows you to secure various workpieces securely, accommodating complex welding projects easily. • Heat and Spatter Resistant: The cast iron construction has excellent heat and spatter resistance, ensuring the welding table remains in pristine condition over prolonged use. • Easy Cleanup: Due to its smooth surface, cleaning up after welding projects becomes very easy. 3D Welding Table Applications: Aerospace Industry Fabrication Projects Automotive Repairs Industrial Maintenance Machine Manufacturing

Cast Iron T slotted Bed Plates are made from good quality close grained high duty grey Cast Iron (C.I), heat treatment is available to relieve internal stresses. Furter more, the cored and ribbed structure help to increase the structural rigidity to bear the heavy loads. Cast Iron T slotted Bed Plates provide a precision reference or datum plane for spotting, tool marking, inspection of workpieces, checking accuracy of other surfaces, for many types of gauging and marking out (layout) operation. Cast Iron Surface Plates are used in conjunction with accessories such as cast iron angle plate, cast iron square box, cast iron square ruler, cast iron right angle ruler, cast iron straight edge, etc. OEM or ODM Service: we offer a wide range of services from standard surface plates to custom order as per request. Calibration Certificate: EX-works inspection reports offered by our Quality Inspection Department are included with every surface plate, “Calibration Certificate” is available upon request for an additional charge. Delivery Costs: calculated during the checkout process. SPECIFICATION: Key Features: • Manufactured from high quality cast iron. • Rigid ribbed structure • Thick & solid top surface • Precisely finished by planning and hand scraping • Accuracy acc. to IS2285-2003 • Custom sizes are welcome as per request. These features make HENGFENG one of the best Cast Iron Surface Plate manufacturers in the industry. Material: HT200-300 or customized Specification: 200x200 up to 4000x8000mm or customized Working Surface: flat, grid slots for location, tapped holes, T-slots, etc. Hardness: HB160-240 Structure: ribbed (bone) structure with enough wall thickness Surface Coating: working surface covered with antirust oil and unmachined areas covered with antirust paint Heat-treated: available for stress relief, stability and wear resistance Accessories: supplied with suitable arrangement for leveling and anchoring on the floor. Stands with Leveling Screws: available for corresponding sizes and supplied at extra cost, if required. total height from floor to the top of the surface plate is approx. 750 to 800mm. Handles: surface plates up to 500 x 500 mm provided with handles for lifting at extra cost, if request. Precision grade: 0-3 Packaging: anti-rust packing+ plywood box Warranty: 1 year https://www.chinasurfaceplate.com/