Industrial Machinery & Equipment

Product Overview USE for Fire protection with UL/FM certificated What is the difference between malleable and ductile iron? Malleable vs. Ductile Iron – A Comparison of Malleable and Malleable iron typically has some internal flaws stemming from irregularly-shaped carbon particles. This makes cracking a possibility. Ductile iron has spherical carbon particles that allow for more bending Malleable iron fittings Size Range: In China galvanized pipe fitting manufacturers, sll size can be supply by detail Request galvanized tee have threads on the inside of the fitting that screw onto the outside of the pipe, while non-threaded fittings are designed to be welded or soldered onto the pipe. depending on the type of pipe and fitting being used.

Minimum Order: 10 long tons

Product Description Equal Tee galvanized malleable iron pipe fittings Cast Iron Fittings factory is located in CHINA (both manufacturing plants and foundry) and has been exporting fittings for the last 23 years all over the world. Product Overview Equal Tee galvanized malleable iron pipe fittings Cas with their extensive history and tradition, malleable cast iron fittings are the most common pipe fittings. With their extensive history and tradition, China galvanized pipe fitting manufacturers are the most common pipe fittings. Because of their durability and mechanical strength, these fittings are very popular. The material can endure high mechanical stress and when combined with the standardized jointing method can be used in a wide range of applications. Equal Tee galvanized malleable iron pipe fittings. GI fittings start out as white iron casting but is then treated at a heat of roughly 1,650°F, 900°C. Malleable iron contains more blunt boundaries opposed to flakes, which eliminates the stress concentration problems that grey cast iron can cause. Disadvantages of cast iron • It is Prone to rusting. • It has poor tensile strength. • Its parts are section sensitive; this is due to slow cooling of thick sections. • failure of Its parts is sudden and total; it does not exhibit yield point. • It has poor impact resistance. • Compared to steel it has poor machinability.

Minimum Order: 10 long tons

Product Description No90 Galvanized Elbow 90 Degree Female malleable iron pipe fittings are designed according to the EN 10242 standard and available in black and hot-dip galvanized versions. They are threaded according to EN 10226-1. The material ensures resistance against mechanical stress and long durability. Product Overview China galvanized pipe fitting manufacturers with their extensive history and tradition, malleable cast iron fittings are the most common pipe fittings. Because of their durability and mechanical strength, these fittings are very popular. The material can endure high mechanical stress and when combined with the standardized jointing method can be used in a wide range of applications. Galvanized pipe fittings factories are usually used to connect steel pipes. However, galvanized malleable fittings are used for galvanized pipe. Malleable iron pipe fittings are most common among malleable fittings and are available in many different types and sizes. What is malleable fitting? Malleable fittings are those fittings having the property of malleability. This is a physical property of metals and metalloids, or any kind of matter. We call a metal malleable when it can easily be deformed, especially by hammering or rolling, without cracking the metal. Malleability is important to form pressing materials such as metals and plastics.

Minimum Order: 10 long tons

Product Description Ductile iron grooved elbow 90 Degree No90 are one type of Grooved fittings. We supply both Blue and RAL3000 for difference used. China grooved pipe fittings have larger radius than elbows. Generally, the most basic difference is the radius of curvature. Elbows generally have a radius of curvature between one to twice the diameter of the pipe. Bends have a radius of curvature more than twice the diameter. Product Detail USE for Fire protection with UL/FM certificated. The Material made by EN545 ductile iron cast fittings. 90° grooved elbow can be used as a corner piece or other joining piece for an industrial decor project. IPS threads for compatibility with other project materials such as lamp parts, valves, etc. Pipe decor line contains an array of fittings and connectors for a variety of projects that can be used. Grooved Size Range: 1/2" to 12". All size can be supply by detail Request. • Compact, full-flow design optimal for use in tight spaces • Connects pipe and provides change in direction. • Pressures up to 400psi I 2758 kPa • Sizes from 2’’ – 12’’ I DN50 – DN300 • Regional availability, contact YINUO for details. Pipe fitting manufacturers come in a range of sizes and shapes to fit different pipe sizes and configurations. They can be threaded or non-threaded, Threaded fittings have threads on the inside of the fitting that screw onto the outside of the pipe, while non-threaded fittings are designed to be welded or soldered onto the pipe. depending on the type of pipe and fitting being used.

Minimum Order: 10 long tons

SHORT DESCRIPTION STYLE Cast Iron FLANGE ADAPTER The gasket seating surfaces on the pipe and on the face of the mating flange must be free from gouges, indentations and deformities of any type for proper sealing. Refer to the installation instructions for complete information. • Vic-Flange Adapters must be assembled so there is no interference with mating components. PRODUCT DETAIL Gasket: (specify choice1) Grade “M” Halogenated Butyl Halogenated Butyl (Brown color code). Temperature range –20°F to + 200°F/–29°C to +93°C. Specifically compounded to conform to ductile pipe surfaces. Recommended for water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. UL classified in accordance with ANSI/ NSF 61 for cold +86°F/+30°C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES. Grade “S” Nitrile (Red color code). Temperature range –20°F to +180°F/–29°C to +82°C. Specially compounded to conform to flanged ductile iron pipe. Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range; except hot dry air over + 140°F/+60°C) and water over +150°F/+66°C. STYLE Cast Iron FLANGE ADAPTER NOT RECOMMENDED FOR HOT WATER SERVICES. 1 Services listed are General Service Guidelines only. Pipe fitting manufacturer should be noted that there are services for which these gaskets are not compatible. Reference should always be made to the latest Victaulic Gasket Selection Guide for specific gasket service guidelines and for a listing of services which are not compatible. Bolts/Nuts: (specify choice) Standard: Carbon oval steel neck track bolts meeting the mechanical property requirements of ASTM A449. Carbon steel heavy hex nuts meeting the mechanical property requirements of ASTM A563 Grade B. Track bolts and heavy hex nuts are zinc electroplated per ASTM B633 ZN/FE5, finish Type III (imperial) or Type II (metric). Optional: Bolts – Stainless steel, meeting the mechanical property requirements of ASTM F593, Group 2 (316 stainless steel), condition CW. Nuts – Stainless Steel meeting the mechanical property requirements of ASTM F594, Group 2 (316 stainless steel), condition CW, with galling reducing coating.

Minimum Order: 10 long tons

SHORT DESCRIPTION Generally, Ductile iron Grooved Equal Cross No180 is used to separate branches of a pipeline as a special pipe fitting. The grooved reducing cross is characterized by a reduced diameter, as opposed to other branches. The cross tee fittings is called a cross if both pipes are of the same diameter. A wide array of wholesale sanitary cross tee branches applications is performed by these fittings, including petrochemicals, oil, natural gas, power plants, food sanitation, building construction, and urban development. PRODUCT DETAIL What are the disadvantages of ductile iron pipe Disadvantages? Ductile Iron Grooved Fittings have the similar corrosion rate to cast iron and steel pipe. Prone to external and internal corrosion. Internal and external protection systems required. Limited number of protection systems available. Polyethylene wrappings can be damaged. Today, Ductile iron Grooved Equal Cross No180 standard compact fittings C153 are commonly used in place of full Body fittings C110. They are designed to be to be more lightweight and more economical to use while providing better flow characteristics.

Minimum Order: 10 long tons

SHORT DESCRIPTION Threaded grooved mechanical tee NPT Outlet with threaded outlet (302) provides a direct branch connection at any location where a hole can be cut in the pipe. The gasket is a pressure-responsive design that provides the seal. PRODUCT DETAIL What is the purpose of a mechanical tee? Ductile Iron Grooved Fittings create outlets that exit pipes, but the outlet is not necessarily the same size as the main pipe. Indeed, many mechanical tees are reducing, meaning that the branch pipe is smaller than the main pipe. Outlet size is also given in nominal pipe size, not actual size. threaded mechanical tee provide a fast and easy mid pipe outlet the requires no welding. A direct branch connection can be made anywhere you can cut a hole in the pipe. They are mounted to the pipe using a collar and provide a smooth flow area. Gaskets conform to the O.D. of the pipe, they are of a pressure-responsive design, so pipe fitting manufacturers provide a complete seal. Allows easy creation of a BSP threaded branch outlet without using reducing tees, couplings or welding. 2 1/2" (65mm) Female BSP threaded branch outlet Red painted body in ductile iron with an EPDM rubber seal FM (Factory Mutual) & UL certified For use with 6" NB (165.1mm OD) & 2 1/2" NB (76.1mm OD) pipe 2x 5/8" bolts (105mm length) & hexagon nuts included.

Minimum Order: 10 long tons

SHORT DESCRIPTION MECHANICAL-T BOLTED BRANCH OUTLET STYLE Victaulic mechanical tee as part of grooved piping systems, use gaskets secured by housings to attach a new line of pipe to an existing one. The mechanical force from the bolts and nuts combined with the gasket and lubricant creates a tight seal around a hole drilled into a run of pipe. PRODUCT DETAIL What is the difference between tee and mechanical tee? The MECHANICAL-T BOLTED BRANCH OUTLET STYLE Victaulic Tee pipe fitting is used for connecting pipes of the same diameter, while the reducing tee is used for connecting pipes of different diameters. The branch diameter of the threaded mechanical tee connection can never be equal to the main pipe diameter. Yinuo is one of the grooved fittings manufacturers exporting to the international market. The pipe fitting manufacturer serves the same function as the MT-1 and MT- 8 but uses a steel electro-plated U-bolt to save space for easier installation in tight places. The MT-90 is ideal for direct connections with sprinkler heads and drop nipples. • Housing: ASTM A536 65-45-12 Ductile Iron • Gasket: Pre-lubricated, Pressure responsive EPDM • Bolts & Nuts: Grade 5 • Compliance: UL® Listed, C-UL ® Listed, FM® Approved • Maximum Pressure: 300 psi • Paint Color : Red (Optional as Galvanized - GALV)

Minimum Order: 10 long tons

SHORT DESCRIPTION YINUO Grooved Equal Tee No130 ductile iron grooved fittings: Grooved Equal Tee No130 grooved piping system is reliable and is faster to install than welding, threading, or flanging, resulting in lowest installed cost. it can be adopted to suit standard pipe with cut grooves or standard and light wall pipe with rolled grooves. we are the exclusive agent of the mech brand ductile iron grooved fittings which has the UL/FM certificates. PRODUCT DETAIL What is grooved pipe fittings used for? Grooved Equal Tee No130 pipe couplings and grooved tee are used to join pipes in both wet and dry system. They provided some flexibility in terms of movement and deflection to the piping system. The concept of grooved coupling was invented in 2006 when Yinuo, a pipe fitting manufacturer, designed the first mechanical coupling. FIG 7060 Standard Tee Grooved Equal Tee No130 fitting. Fittings for grooved-end pipe. These Ductile Iron Grooved Fittings are designed to provide minimum pressure drop and uniform strength. Priced and sold as each. 4 in. grooved end fitting Standard tee 16.8 FPM Branch, 6.7 FPM Run 1000 PSI Priced and sold as each Ductile iron conforming to ASTM A 536, Grade 65-45-12. Rust inhibiting paint - Color: ORANGE (standard). Ductile Pressure ratings of standard fittings conform to those of Fig. 7001 coupling. UL listed. FM approved. 1 Year warranty from the date of shipment.

Minimum Order: 10 long tons

Product Description Grooved rigid coupling 3/4 cast iron Coupling YN01UL/FM APPROVED Rigid Coupling: Ductile Iron, 4 in x 4 in Fitting Pipe Size, Grooved, Class 150 China grooved pipe fittings are a proven faster, easier, and safer method of joining pipe and are an economical alternative to welding, threading, or using flanges. There are two basic grooved coupling styles: Flexible grooved couplings/fittings and Rigid grooved couplings/fittings. Flexible grooved couplings/fittings allow a limited amount of angular movement. Rigid grooved couplings/fittings do not allow movement and can be used wherever immobility in the pipe joint is needed, like a flanged or welded joint. Product Overview What are the three types of rigid coupling? In Pipe fitting manufacturers, there are three main types of Grooved rigid coupling 3/4 cast iron Coupling YN01: sleeve, flanged rigid coupling and clamped. For commercial shafting, a rigid coupling may be a sleeve with the shafts pressed into each end or it may be a clamping sleeve. The sleeve on each shaft end may have an external flange with bolt holes. Grooved rigid coupling 3/4 cast iron Coupling YN01 couplings connect rotating members such as shafts and transmit torque and motion. Most rigid couplings are made of aluminum, steel, or stainless steel. Rigid materials examples include corrugated and paperboard boxes, plastic bottles and boxes, aluminum cans, and glass jars. Popular applications include cereal boxes, glass bottles of spirits, cans of soup, and laundry detergent bottles.

Minimum Order: 10 long tons

Our wedge wire strainers can used for: 1. Oil and gas extraction. Wedge wire screens and sand control screens are used to prevent sand and other solid particles from entering and damaging downhole equipment while allowing hydrocarbons to flow into the well. 2. Water injection and produced water treatment. In enhanced oil recovery (EOR) and water drive operations, wedge wire screens are used as filtration elements in water injection systems to remove solid particles and impurities from the injected water. Additionally, they are also used in treating produced water to ensure that oil and solids are effectively separated from the water before disposal or reinjection, thus maintaining the efficiency of the system. 3. Refineries and petrochemical filtration. Wedge wire screens are used in filtration units within various refineries and petrochemical processes to remove impurities and particulate matter from crude oil, condensate water, or other process fluids. This ensures the quality and integrity of downstream products. 4. Gas-liquid separation. Wedge wire screens are employed in the gas processing units in the petrochemical industry. They help separate entrained liquid droplets from natural gas or other gases, to improve the quality of gases and prevent damage to downstream equipment. 5. Hydrocyclone support. Wedge wire screens can be used as a support structure in hydro cyclones, typically used in processes such as oil-water separation or sand removal from produced water, facilitating liquid-liquid or liquid-solid separation. YUANLV has been supplying wedge wire screens to the petrochemical industry for many years and has wide range of products in our portfolio including Support Grids, center pipes, scallops, Header Laterals, Centrifuge baskets, and filter Nozzles.

Minimum Order: 1 bags

At YUBO, we specialize in providing high-quality wedge wire screens tailored for the mining and mineral processing industries. Since our establishment in 2008, we have been dedicated to delivering superior screening solutions that meet the demanding needs of mineral processing, recycling, and aggregate operations. Our wedge wire products are designed to handle high volumes, deliver efficient separation and classification, and excel in the toughest, most abrasive environments. Wedge Wire for Mineral process Why Choose Wedge Wire Screens? Wedge Wire Screens have become synonymous with the worldwide mineral processing, recycling, and aggregates industries. They are renowned for their exceptional screening properties for high volume separation and classification, and they are capable of handling abrasive materials and heavy-duty applications. YUBO has built a reputation for providing reliable, long-lasting products that ensure optimal plant performance and efficiency. From flat screens to centrifuge baskets, we supply a comprehensive range of wedge wire screening products to suit various OEM machinery types across the UK, Europe, and worldwide. Key Applications of Wedge Wire Screens: Mineral Processing & Classification: Efficient separation and sorting of minerals like coal, potash, and ore. Dewatering & Slurry Separation: Effectively separate water from materials for improved processing. Precious Metal Recovery: Vital for the recovery of gold, silver, and other precious metals. Aggregate Screening: Screening and classification of sand, gravel, and other aggregates. Coal and Mineral Processing: Ideal for processing coal, iron ore, and other minerals. YUBO wedge wire products for Mining and Mineral Processing: 1. Centrifuge Baskets YUBO centrifuge baskets are engineered with precision to maximize open area, wear resistance, and ensure consistent slot integrity throughout their service life. These baskets are ideal for fine particle separation and high- efficiency processing. 2. Polyurethane Screens Our polyurethane modular screens are perfect for mineral processing in industries such as coal, iron ore, gold, phosphate, copper, lead, zinc, bauxite, and more. These screens combine durability with flexibility, allowing plant managers to optimize screen performance to suit their specific needs. The modular design makes them easy to customize for various processing applications, from dewatering to screening and classification. 3. Trommel Screens YUBO trommel screens are suitable for both wet and dry applications, and they are widely used in the screening of mineral sands, coal, phosphate, gravel, and more. The large open area of our wedge wire trommel screens ensures accurate classification, making them perfect for high-efficiency operations. Customizable aperture sizes and designs make them adaptable to a variety of screening needs. 4. Sieve Bend Screens / Curved Panels / DSM Screens Our sieve bend screens, also known as DSM screens, are ideal for precise dewatering, filtration, and separation tasks. Their curved shape ensures high performance and minimal clogging, making them an excellent choice for both mineral processing and slurry separation applications.

Minimum Order: 100

Dandong Foundry is a metal casting manufacturer in China. We are producing iron & steel castings by sand casting and lost wax casting process.Our website:http://www.iron-foundry.com/.

Dandong Foundry is a metal casting manufacturer in China. We are producing iron & steel castings by sand casting and lost wax casting process.