Industrial Machinery & Equipment

The digestion vessel is divided into two inner and outer tanks. The inner lining is made of Telfon material and the outer tank is made of 304 stainless steel to prevent tank explosion. Specially used for digestion experiments of insoluble samples and volatile elements in samples. #samplepreparation #digestionvessel #geochemistry #labware

Teflon centrifuge tubes have tube caps to prevent sample leakage, especially for radioactive and highly corrosive sample experiments. It can also prevent the centrifuge tube from deforming. #centrifugetube #samplepreparation #labware

1. Resistant to strong acids and alkalis (especially hydrofluoric acid), high temperature -200~+260℃. 2. Use acid steam to clean the utensils in countercurrent to clean more thoroughly and avoid cross-contamination. 3.All wetted parts are molded from high purity PFA. 4.No need for continuous monitoring. 5.Saves on acid cost,environmental friendly.

Widely used in laboratories such as ICP-MS/OES and other trace analysis and isotope analysis. The outlet of the washing bottle has a fine and even opening, which can be used to configure the standard solution in place of the volumetric flask.

This week, we launched a hydraulic check valve with 3 key elements benchmark SUN CXFA standard parts. This hydraulic check valve is free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction. The manufacturing quality of this hydraulic check valve is compared to SUN CXFA; the function of this hydraulic check valve is benchmarking against SUN CXFA; the performance of this hydraulic check valve is benchmarking against SUN CXFA. In 2022, AAK shipped this hydraulic check valve 12 times to 4 customers, and received 4 inquiries within 4 months of 2023. AAK hydraulic check valve 2 major advantages: 1. Low leakage, internal leakage 1 drop/min. 2. 3 key elements benchmark SUN, but the price is less than 70% of SUN. Technical parameters of AAK E-CXFA Hydraulic Check Valve: Maximum Operating Pressure: 350 bar (5000 psi) Capacity: 40 gpm (160L/min) Internal Leakage: 1 drops/min. Cavity: T-5A AAK hydraulic check valve, 3 key elements benchmark SUN CXFA, you can also have a small try.

Minimum Order: 1 bags

We are manufacturing paper Cup Forming Machines and exporting our machines to worldwide with excellent quality since 1987. _______________ _ Model No........Cup size..........Speed.....................PE Coating _______________ _ DSS-80A.......2 ~ 7 oz.........80 cups/min...............Single PE DSD-50A.......2 ~ 7 oz.........60 cups/min...............Single/Double PE DSD-50B.......8 ~ 10 oz.......55 cups/min...............Single/Double PE DSD-50B......12 ~ 16 oz......50~55 cups/min.........Single/Double PE DSD-50C......18 ~ 32 oz......45~50 cups/min.........Single/Double PE DSD-50C......40 ~ 44 oz......45~50 cups/min.........Single/Double PE DSN-50..........8 ~ 16 oz.......50~55 cups/min.,,,,,,,,Single PE... Double Wall Cup _____________ DSP-300.......300 strokes/min...... Punching Machine DSF-300S.....70m/min..................F , lexo-Printing Machine ______________ If you need above paper cups, please let me know your inquiry. I will send all infomation of paper cup making machines immediately. Best regards Dae Won Chae

Minimum Order: 1 bags

1. Suitable for semiconductor analysis, trace analysis, isotope analysis and other analytical laboratories that have strict requirements on the use of utensils. 2. Good sealing, no leakage, can be stored for a long time, and has a high reuse rate. 3. The metal element blank value is low, the content of lead, uranium, etc. is <0.01ppb, and there is no dissolution or precipitation. #reagentbottle #samplingvessel #teflon #labware

1.Application: Heating water bath, oil bath, etc. 2. Operating temperature: -200℃~+260℃. 3. Features: The inner wall is smooth, corrosion-resistant, and the metal element blank value is low. 4. Main use: Reactor between liquid and solid or liquid. #labware #digestionvessel #labware #flask #teflon

Multiple specifications available: 5/10/25/30...1000/2000ml; 1. Corrosion-resistant, especially resistant to hydrofluoric acid. 2. Low background, no dissolution or precipitation. 3. Anti-fall and durable. #cylinder #labware #teflon #electronicgrade

Can be externally connected to a gas washing bottle absorption device to form a reaction device; the bottle cap and bottle body are made of high-purity PFA material, without other impurities; resistant to strong acids and alkali, and high temperature: -200~+260℃; multiple specifications available custom made. #teflon #labware #digestionvessel #ICPMS

Made of high-purity resin Teflon, it is resistant to strong acids and alkalis, and can withstand high temperatures: -200~+250°C. The surface is smooth, non-stick, and easy to clean. Wafer Container specifications and styles can be customized. #semiconductorwafer #wafercontainer #teflon #labware

Full specifications can be customized: 30-10000ml; resistant to strong acids and alkalis, high temperature resistance: -200~+250℃; smooth surface, easy to clean; made of Teflon resin, not easy to break. #teflon #labware #sampling

High-purity PFA, one-piece molding without welding. 1.5/15/30ml available, tube diameter and tube length can be customized. Resistant to strong acids and alkalis, with a rotatable stand for easy placement.

Yagmur is from Türkiye and mainly purchases hydraulic cartridge valve standard parts from Ningbo. Recently, they developed a hydraulic drilling equipment that uses hydraulic flow control valves that are modeled after HydraForce standard parts, and purchased from a hydraulic valve manufacturer in Ningbo. During equipment debugging, it was found that the flow rate of the hydraulic flow control valve was unstable, and the leakage rate did not match the hydraulic system. The original hydraulic flow control valve manufacturer stated that this is a replica of HydraForce and is unwilling to optimize its function for several hydraulic flow control valve samples. Yagmur checked with several other hydraulic valve manufacturers, but they were not interested. Yamour was very anxious. The original hydraulic flow control valve manufacturer introduced AAK to Yagmur. After communication, it was learned that her requirements for this model include low leakage and high precision requirements for valve holes. Based on the hydraulic system schematic provided by her and the industry model code of the HydraForce hydraulic flow control valve, I recommended a ready-made sample to her. As long as the external dimensions meet his manifold requirements, it can solve the problem she is currently facing. 2 weeks after the sample was sent out, Yagmur informed via email that the drilling equipment was successfully debugged. The low leakage of AAK hydraulic flow control valve meets their system requirements, especially the flow control function that they are very satisfied with. I told her that for this AAK hydraulic flow control valve, we have 3 major advantages: 1. The internal leakage of AAK hydraulic flow control valve is 5 drops/min, while most peers can only achieve 8-10 drops/min. 2. The hole accuracy of AAK hydraulic flow control valve can reach IT6-IT7 level, and the surface roughness can reach Ra0.2-0.025μm. 3. The AAK hydraulic flow control valve function fully aligns with the standard parts of HydraForce, and there are probably no more than 3 manufacturers in Ningbo to meet it. The vast majority of hydraulic flow control valve manufacturers in the industry do not use forming cutters for machining small quantities of hydraulic flow control valves, but use CNC instead to process according to dimensional requirements. The result of this machining is an accuracy of 0.03mm and a positional tolerance of 0.02mm. The AAK hydraulic flow control valve is processed with forming tools, and the dimensional accuracy of the valve hole after processing reaches 0.01mm, with a positional tolerance within 0.007mm. At the same time, AAK has its own standards for tool selection, with hardness of HRA90 alloy material, heat resistance of 900 ℃, valve hole accuracy of IT6-IT7 level, surface roughness of Ra0.2-0.025μm, and tool life is 30 times higher than ordinary alloy steel. AAK hydraulic flow control valve, has 3 major advantages, and its functions are completely up to standard with HydraForce. You can also give it a try.

Minimum Order: 1 bags