Industrial Machinery & Equipment

Fixed Bed Process Hydrogen Peroxide Plant Product Description There are several methods for hydrogen peroxide production and manufacturing, among them the AO(auto-oxidation) process is the most prevailing one. In this process, 2-alkyl anthraquinone is mixed with organic solvent to make up the working solution, which is hydrogenated in presence of catalyst, and the resulting is oxidized by air (or oxygen) in counter-current way before being extracted, regenrated, purified and enriched to get commercial hydrogen peroxideproduct. Depending upon the different reactor type in the hydrogenation unit, AO process is further divided into Fixed Bed Reactor Process and Fluidized Bed Reactor Process. Features of Fixed Bed Process Hydrogen Peroxide Compared to the other Fixed Bed Ractor Process prevailing in China, the fixed bed process Hydrogen Peroxide technology offered by SL TEC has following advantages as below. ● Advanced DCS control system, SIS safety system and industrial video monitoring system are set up. The optimal control, alarm and safety interlocking of various process parameters in the hydrogen peroxide production process are realized. Implement video surveillance for key point control points and key positions. Ultimately, the entire system is stable, high-yield, low- cost and safe. ● Concentration adopts the world's most advanced falling film distillation technology to make the residence time of hydrogen peroxide solution in the falling film evaporator short to avoid the decomposition of hydrogen peroxide; in addition, the evaporator uses low pressure saturated steam to make the effective temperature difference ≦8~10 °C, which saves steam consumption while reducing unit consumption. ● The Fenton oxidation method + biochemical treatment sewage technology has been successfully applied, so that the sewage of the hydrogen peroxide device is completely discharged after being treated.

ER-MA-5 (Alternative of MS1000) (20~150ug): 1. Bias stability (Allan Curve) 5 ug; 2. Bias stability (1s Standard Deviation)(1σ) <20ug; 3. Bias month repeatability 200ug. ER-MA-5 High Accuracy MEMS Accelerometer (Alternative of MS1000) Accelerometer is an inertial sensor, which can measure the linear acceleration due to gravity. MEMS accelerometer has the characteristics of small volume, light weight and low energy consumption that can be widely used in vibration detection, attitude control, security alarm, consumer applications, motion recognition and status recording. Accelerometers are combined with gyroscopes and magnetometers to create IMU (inertial measurement units). Applications ER-MA-5 High Accuracy MEMS Accelerometer (alternative of MS1000) Inertial measurement: inertial guidance, overload measurement, combined navigation Tilt measurement: antenna attitude, platform measurement, dip test Vibration measurement: mechanical equipment, bridge dam, safety test

ER-MG-056 (3°/h) 1. 3°/hr bias instability; 2. 0.25°/√hr angular random walk; 3. Economical MEMS. ER-MG-056 Economical MEMS Gyroscope Introduction The ER-MG-056 Low-cost & High-accuracy MEMS Gyro is a single-axis MEMS angular rate sensor, which can measure the maximum angular velocity of ±400°/s, and the digital output conforms to SPI slave mode 3 protocol. Angular rate data is presented as a 24-bit word. The ER-MG-056 is intended for industrial, instrumentation, stabilization, and other high performance applications. An advanced, differential sensor design rejects the influence of linear acceleration, enabling the ER-MG-056 to operate in exceedingly harsh environments where shock and vibration are present. The ER-MG-056 is available in a hermetically sealed ceramic LCC surface mount package, and is capable of operating at 5V supply and a wide temperature range (−50°C to +85°C). Features Proven and robust silicon MEMS gyro Up to ±400°/s measurement range 3°/hr bias instability 0.25°/√hr angular random walk Digital output (SPI slave) 5V operation (4.75~5.25V supply) Low power consumption (35 mA) High shock and vibration rejection Hermetically sealed ceramic LCC surface mount package (11x11x2mm) Integrated temperature sensor RoHS compliant Applications Precision instrumentation, stabilization Guidance, navigation, control Avionics, unmanned vehicles Precision autonomous machines, robotics

ER-2MG-01 (≤25º/h) 1. Small dimension; 2. Good Stability; 3. High performance. Dual Axis MEMS Gyroscope The Dual Axis MEMS Gyroscope has the characteristics of low power consumption, wide operating temperature range, wide bandwidth, small size, fast start-up, DC input and DC output, etc., and can be widely used in automotive electronics, aircraft guidance and control, attitude reference systems, platform stability, Robots, antenna stability, cameras, digital camera gyroscopes and other systems. Applications UAV (Unmanned Aerial Vehicle) Balance measurement

ER-MNS-05 (0.5°/1°): 1. Triaxial MEMS North Seeker; 2. Mini size and high performance; 3. Full temperature compensation. ER-MNS-05 Cost-Efficient Triaxial MEMS North Seeker https://www.ericcointernational.com/nort , h-finders/mems-north-finder/three-axis- mems-no , rth-seeker.html 1. Technical Features Triaxial MEMS gyro and accelerometer Full temperature compensation High performance and mini size Light weight, low power consumption -45 ℃ to +80℃ full temperature scale compensation 4KHz high-speed sampling Resistant to harsh mechanical environment Have software online upgrade function 2. Technical Advantages 1) The accuracy can be customized, also can be widely used in many fields ER-MNS-05 Triaxial MEMS North Seeker is a highly reliable and cost-effective combination of six-axis MEMS inertial sensors, which can be widely used in navigation, control and measurement fields represented by inertial navigation and attitude stabilization. ER-MNS-05 3 Axis MEMS North Seeker can be configured with different hardware and software according to the needs of users, so as to meet the needs of different users. 2) Advanced process and technology The ER-MNS-05 3 axis MEMS North Seeker integrates high-performance MEMS gyroscope and MEMS accelerometer in an independent structure. The gyroscope and accelerometer selected in the module represent the leading level of MEMS process inertial devices. The three-axis MEMS gyroscope is sensitive to the angular motion of the carrier, and the three-axis MEMS accelerometer is sensitive to the linear acceleration of the carrier. The zero position, scale factor, non-orthogonal error and acceleration related terms of the whole temperature parameter are compensated inside the module. It can also maintain high measurement accuracy for a long time. At the same time, the module adopts the overall vibration reduction, sealing design and other measures to ensure that the product can still accurately measure the angular and linear motion parameters of the carrier in the harsh environment, so as to provide users with a low-cost and high reliability solution. 3) High precision components manufacturing and system calibration compensation technology. We have accumulated a series of key technologies in the research and development process of this project to ensure the high performance of the products. At the same time, the system adopts high-speed sampling, static error compensation (zero position, scale factor, installation error and other fine compensation in the whole temperature zone), dynamic error compensation and other technologies, to ensure that the product during the use process to achieve the best performance. 4) High quality and reliability Through the comprehensive control of upstream and downstream processes and technologies, the company can effectively improve product quality and reduce system costs. At the same time, the company implements ISO9001 and GJB quality systems adopt strict processes to ensure the reliability and consistency of product performance. Especially in the desert and other outdoor areas, the precision of traditional geomagnetic north finding schemes is not high. ER-MNS-05 Triaxial MEMS North Seeker produced by our company has the characteristics of being free from environmental interference, high precision measurement, small size and low power consumption, which can well meet the above requirements. 3. Applications North finder Navigation and control Attitude reference system Guidance Vehicle and ship attitude measurement Integrated inertial/satellite navigation system Drilling and production systems Mobile mapping system On-the-move

ER-MNS-04 (0.5°/1°): 1. Single axis MEMS gyroscope; 2. Economical north seeker; 3. Fast seeking true north. ER-MNS-04 Economical MEMS North Seeker Introduction More information please click here ER-MNS-04 Economical MEMS North Seeker (0.5°/1°) use high precision MEMS gyro to find true north, built-in IMU is used to measure pitch angle. It has features of miniature, low power consumption, long usage life, high reliability. The products are widely used in coal mining, oil drilling, tunnel construction and geodesy, also can be used for static initial alignment and direction control of radar, antenna, vehicle and other objects. Applications North seeker Navigation and control Attitude reference system Guidance Vehicle and ship attitude measurement Integrated inertial/satellite navigation system Drilling and production system Mobile mapping system On-the-move

ER-FNS-01 High Performance Dynamic FOG North Seeker (0.02°-0.5°) Introduction ER-FNS-0 , 1 High Performance Dynamic FOG North Seeker (0.02°-0.5°) consists of high precision, rugged solid FOG, quartz accelerometer, data acquisition and processing unit. It can provide its true north position information when the carrier moves. At the same time, the information of motion attitude, velocity and position of the carrier can also be displayed. This dynamic north seeker is suitable for static and dynamic initial alignment of missile launch, weapon aiming, direction control of radar, antenna and land surveying and mapping. https://www.ericcointernational.co , m/north-finders/fiber-optic-gyro-north- finder/ , dynamic-fiber-optic-gyro-north-finder.html , Applications North seeker Navigation and control Attitude reference system Guidance Vehicle and ship attitude measurement Integrated inertial/satellite navigation system Drilling and production system Mobile mapping system On-the-move

Compressor Components Compressor components refer to the various pieces of equipment used in compression units. These components vary in size, material, temperature range, flow rate, and vibration level, depending on the type and purpose of the component. Compression units are composed of steel, aluminum, brass, copper, and other materials, and they are designed to withstand various temperature ranges. The flow rate of the compression unit components also varies, depending on the size and type of components. In addition, the vibration level of these components also varies depending on the size. Compressor components are designed to ensure the efficient operation of compression units. As such, they are subject to warranties that vary depending on the manufacturer. The quality of the components is of utmost importance, as even the slightest variation in temperature range, flow rate, or vibration level can have an effect on the overall performance of the unit. For this reason, compressor components must be regularly inspected and maintained. Compressor components are an essential component of any compression unit, and they are key to the efficient operation of the unit. Purchasing quality components is essential for ensuring the optimal performance of the unit, and it is important to select components that are compatible with the unit as well as the environment in which it will be operating. By choosing the right compressor components, you will be able to ensure the reliability and efficiency of the unit.

Operation Principle Chamber air tightness test:JG/T 382-2012“Pass box”( - 500 Pa pressure maintaining 20 min,≤ - 250 Pa) HEPA leak detection: in situ scanning leak detection can be done for high efficiency of air supply and exhaust Cleanliness: static class A Product Description Reserved foundation pit, equipment internal ground and ground level Door body multi-point fixed, high strength, no sagging Split window, chamber situation can be clearly seen If there is a dry/wet heat sterilization chamberet around, color steel plate isolation is recommended. Characteristic & Features Sterilization process <120min. to realize multiple sterilization operations one day. Emergency Stop. Decomposition filter can effectively reduce the concentration of VHP remain Reduce the impact on environment and personnel. Very low hydrogen peroxide consumption.

Air-cooling welding machine is a kind of welding equipment that adopts air cooling method. It blows air towards the welding area through a built-in fan to cool down the temperature of the welded parts and prevent overheating. Air-cooled welding machines are usually small in size, easy to carry and move, easy to operate, and suitable for various environments and occasions. TOPTEK laser source, independently developed by our company. Using the latest generation of fiber optic sources prevents beam reflections. The latest models of resonators achieve an ultra-high power output, which translates into optimum performance and excellent weld quality. Photovoltaic conversion efficiency exceeds 30%. For more information, please refer to the following website; Facebook: https://www.facebook.com/TOPteklaser? notif_id= , 1685946763435247¬if_t=profile_plus_admin_invite , &ref=notif LinkedIn：https://www.linkedin.com/ , company/toptek-laserwelding/mycompany/? viewAsM , ember=true Twitter：https://twitter.com/LaserW , elder01 YOUTUBE: https://www.youtube.com/@toptekwelding/featured TIKTOK: https://www.tiktok.com/@toptek_laser VK：https , ://vk.com/id812450283

Technical Features 1. Precise P.I.D. temperature control High-precision timer Alarm capability Consistent fluid medium heating Inclusion of a standard square metal clamp and a free shrink holder Equipped with an oil bath cover Standard: ASTM D2732 Main Parameters Sample Size ≤160 mm x 160 mm Temperature Range Ambient ~ 200°C Accuracy ±0.3°C Dimension 37*44*28 LWH cm Power Supply 220V 50Hz Technical Features 1. Precise P.I.D. temperature control High-precision timer Alarm capability Consistent fluid medium heating Inclusion of a standard square metal clamp and a free shrink holder Equipped with an oil bath cover Standard: ASTM D2732 Main Parameters Sample Size ≤160 mm x 160 mm Temperature Range Ambient ~ 200°C Accuracy ±0.3°C Dimension 37*44*28 LWH cm Power Supply 220V 50Hz

Minimum Order: 1 bags

Application The FSR-01 Shrink Force and Ratio Tester serves the purpose of measuring both the shrinking forces and shrinkage ratio of heat shrinkable films. These films are typically created through extrusion and stretching (hot drawing) during their manufacturing process, retaining this stretched state even after cooling. When the heat shrinkable film is reheated to the temperature at which the initial stress was introduced and subsequently fixed during its production, this stress is released, causing the film to contract or "shrink back." Depending on the specific manufacturing treatment applied, the film can be categorized as either biaxially oriented (stretched in two directions) or uniaxially oriented (stretched in one direction). Test Process 1. A well-insulated air oven is heated to the set temperature. The two samples are placed separately on two test stations, for shrinkage rate and shrink/contraction force testing. 2. A temperature probe is located to measuring area, to give result as reference temp. The air oven is driven down automatically to cover the sample area. The force and shrink rate are to be measured and the shrinkage temperature is reached when the maximum shrinking force is attained. 3. When this force has decreased by around 15%~30%, the air oven is lifted and time is recorded. 4. The assessment of shrinkage ratio is performed at the mean time. Technical Features 1. PLC Control and HMI Touch Screen: ensuring industrial-level stability. 2. Well-Insulated Air Oven: The air oven is excellently insulated and capable of automatic lowering and lifting, enhancing the precision of the testing. 3. Non-Contact Shrink Ratio Measurement: accomplished through a noncontact method, improving accuracy and reliability. 4. Real-Time Display:including shrinking force, contracting force, and shrinkage ratio, allowing for immediate analysis and monitoring. 5. Elimination of Interference Factors: Irrelevant interference factors like friction and cool air are effectively eliminated, ensuring the accuracy of the results. 6. Stable Heating System: The heating system is stable and well-balanced, maintaining consistent and controlled test conditions. 7. Easy Sample Loading: Sample loading is made easy, streamlining the testing process and reducing setup time. 8. High-Resolution Sensors: The system is equipped with high-resolution force transducers and thermometers, guaranteeing precise measurements. 9. Connectivity and Software:(optional) It includes an RS232 port for data connectivity and offers optional professional software for advanced data analysis and reporting capabilities. Standards: ISO 14616, DIN 53369

Minimum Order: 1 bags

Application The FPT-01 Friction and Peel Tester is a versatile and multifunctional device designed for various applications: Measurement of Coefficient of Friction: It accurately measures both static and kinetic coefficients of friction for a wide range of materials, including plastic films, sheets, rubber, paper, paperboard, PP woven bags, fabrics, composites, and more. This capability is valuable for understanding how materials interact with each other and with various surfaces. Delicate Peeling Force Test: The tester can perform delicate peeling force tests on materials such as release paper, adhesive tape, medical adhesives, composite films, and protective films. This feature is essential for assessing the ease of separation between different layers of materials, ensuring product quality and performance. The FPT-01 Friction and Peel Tester is a versatile instrument that serves as a valuable tool for quality control, product development, and research in industries dealing with a wide range of materials, from packaging to medical applications. System Description FPT-01 Friction and peel tester has a fixed loadcell position, with a protection cover. A movable plane is installed firmly to ball lead screw. The sled is to put on sample sticking to the plane, which is then connected to loadcell, with a filament. When performing peeling test, as the force is small, the right sample clamp is stuck to plane, using double side type. Then a separation action is performed to peel the sample and force is recorded during the process. Technical Features FPT-01 Friction and peel tester is a PLC-controlled unit with industrial-grade stability and operates through an intuitive HMI touch screen interface. The precision ball lead screw mechanism ensures consistent speed and displacement control. The system offers two distinct testing methods: one for measuring the coefficient of friction (COF) and another for assessing peeling forces. In COF tests, precise free speed settings are available, while peeling tests consider parameters that influence peeling results, such as initial and tail portions. Other features 1. Real-time data analysis and display, including results and graphical curves. 2. Compliance with various test standards. 3. Integration of a dot matrix micro printer. 4. Inclusion of an advanced peeling program. 5. Optional RS232 and software. Major Standards ISO 8295, ASTM D1894, TAPPI T816, ISO 8510-2, ASTM D4917, ASTM D3330, TAPPI T549

Minimum Order: 1 bags

Application: Full Automatic Weighing Packing Line Machine is suitabel for all kinds of grain material, sheet material, strip material and abnormity material which such as candy, sunflower seeds, peanut, nuts, beans, potato chips, popcorn, almond, dry fruit, vegetable salad, frozen food, jelly, biscuit, chocolate, filbert, corn, pet food, dilatant foodstuff, hardware and plastic can be weighed by the ration. Kindly Reminder: We have experienced team of R & D engineers who can customize packaging solutions according to your product characteristics. Automatic Packaging Line Features: Feeding, Measuring, Bagging, Date printing, Charging(Exhausting) realising fully automation. High precision, high efficiency without crash the materials. Product diversification packaging. Weighing accuracy 0.4 to 1.0 gram.