Industrial Machinery & Equipment

Sino-NSH-CP series is an oil purification system with thermal, filtering and centrifugal separation processing, with capacity from 1500 liter/hour to 6000 liter/hour. Sino-NSH-CP series is especially designed for the oil industry for the purification and recycling of liquid oil. This series is designed to overcome the harmful effects of oil contaminants, water and solid particles from fuel oil, lubricating oil and other mineral oil in marine engine unit and land generator unit of power station so as to reduce wear of diesel engine and other machine, and prolong the serving life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid. Sino-NSH-CP series model instruction: Mode Discharge mode Operation mode CP manual manual CPA Half-auto manual CPPA Full-auto auto Sino-NSH-CP series maintains: -Easy-handling control -High separation efficiency -Unattended operation available -Low consumption -Economic maintenance cost -High speed rotary machine, low vibration, safe and stable

Minimum Order: 1 bags

Sino-NSH-PF is a portable multi-stage high precision oil purification equipment. Sino-NSH-PF is mainly used to the negative mechanical impurities. Because of flexibility and portability, it is widely used in the fields of power station, petrochemical industry, metallurgy, mechanical engineering etc. For oil filling, oil pumping as well as high precision purifying and pipe cleaning.

Minimum Order: 1 bags

Sino-NSH-GER is regeneration system for waste engine oil including diesel engine oil, gasoline engine oil, as well as used hydraulic oil and some other machinery’s lubrication oils. Sino-NSH-GER is designed with the combination technology of physical and chemical processing, can effectively remove aging products and contaminants from used oil. Physical processing method can remove solid particles, water, gas etc. Chemical processing method allows removal of colloid, oxide, acid, pitch in the used oil. Specially, this system can restore the color of used oil and remove the scent rapidly. Sino-NSH-GER is an environmentally friendly system, abandon traditional acid processing method, effectively solve the environmental pollution caused by the old technology of waste oil recycling. Various options are available for this system to improve the automation of operation.

Minimum Order: 1 bags

Sino-NSH-GED-WB is designed to process and recycle waste oils, thereby to acquire high quality base oil. Sino-NSH-GED-WB adopts the advanced technology of vacuum distillation, can effectively remove wearing debris, pitches, waxes, impurities, water, carbon deposits, oxides from the waste oil, as well as decrease the acid. The base oil acquired is with high quality that can meet the standard and requirements for blending various industrial lubrication oils. During the distillation process, a powerful vacuum pump system provides a stable vacuum, the hydrocarbon chain breaks to reform new molecule of the oil, and turns into oil mist. Then it turns into liquid oil by effective condensation. Exhaust gas treatment device is equipped to ensure that emission gas strictly meets environmental requirements. Sino-NSH-GED-WB is the upgrade model of NSH-GER, saves operating costs and increase oil recovery rate, it can reach high rate above 90%. In addition, NSH- GED-WB has a wider range of applications, can be used to process almost all waste oils, such as engine oil, hydraulic oil, gear oil, etc. Both single oil or oil mixture can be processed and recycled by this system. Various capacities are available for this system to meet different needs of customers, and a variety of heating methods also allow customers to choose according to actual needs.

Sino-NSH-GED-WD is a waste oil regeneration system that cracks waste oil to diesel fuel. Sino-NSH-GED-WD adopts the atmospheric distillation technology, also known as cracking technology.During the distillation process, the waste oil is heated to the setting temperature and turns into oil mist, then it passes through the catalyst tower. After sufficient reaction with the catalyst, the oil mist passes through the condensing system to be control to liquid diesel. This system can be applied for gasoline motor oil, diesel motor oil, all kinds of engine oil, mineral oil, synthetic oil, transmission oil, hydraulic oil, gear oil and other used black lubricant oils to produce clean diesel oil. Diesel acquired from NSH-GED-WD system meets international standard and can be fully applied to burners, diesel engines, generators etc. This system is very safe because the temperature setting is rigorous and the machines is stabilization. Our technical team commits to design the most reasonable and high efficient distillation system to realize the profit maximization of the both parties. Recovery rate is above 90% with low operation cost, only 5-6 USD for recycling one ton used oil.

Minimum Order: 1 bags

Product Description 5KW Auto Spray Painting Machine For Wooden Door High quality automatic spraying machine for wooden door Product Application With the process of society, munal spraying has failed to meet the needs of modern industry. So, it is necessary to use automatic spraying take place of manual spraying. This spraying mchine is professional application for wooden door coating . Its design depend on the shape and size , coating process of wooden door. This machine spray a wooden door both two sides in 3 minutes. SPECIFICATIONS FOR SPRAYING MACHINE Control system 1. Japanese OMRON PLC 2.Taiwan WEINTEK Color industrial touch screen 3. Schneider Electric switch and Power Supply 4. Japanese OMRON relay 1.Precision divider 2.Taiwan CPG Gear motor 3. Japanese Mitsubishi frequency converter Product rotation platform 1. Precision divider 2. Can be 90 degrees, 180 degrees rotation, continuous rotation 3. multi-station rotation Spray gun 1. Japanese ANEST IWATA Paint supply system 1. Amercian GRACO 308 diaphragm pump 2. Pneumatic agitator produce from Taiwan,China 3. Taiwan AIRTAC Solenoid valve, Pressure regulating valve, Pressure gauge Power supply AC220V50HZ, Single phase three wire

Sino-VR is vacuum units create vacuum in transformers and other equipment. Sino-VR is a double-stage vacuum system. The first stage is a rotary-vane vacuum pump achieves 0.5mbar vacuum. And the second stage booster could achieves 0.0005mbar. Besides, vacuum gauge, controller, buff, etc to ensure the stable performance

Minimum Order: 1 bags

NSH-HLC is a recycling and charging device for Sulfur Hexafluoride Gas(SF6). it is suitable for on-site installation and maintenance of 110KV-220KV GIS switch and 110KV-800KV GIS switches. NSH-HLC is equiped with recovery system, inflatable system, pressurized inflatable system, vacuum system, purification system and so on. Sino-NSH-HLC maintains: -Adopting the international advanced design of refrigerated liquid, reducing the working pressure, meanwhile greatly improving the recovery efficiency. -Equips self-regeneration drying-and-filtering device. One recovery could reduce water down to less than 80ppm(ratio by volume). -Able to evaporate liquefy the SF6 gas then transfer to device. -Flow chart on operation broad, easy handling. -The electrical system has phase protection, phase disable protection. -Adopting air cooling, mobile type, could be operation without water. -Light weight, low noise.

Minimum Order: 1 bags

Sino-NSH-ADK is an air drying system. It is also named dry air regenerator. Sino-NSH-ADK is widely used for various transformer drying application. It can purge clean, dry air into a confined transformer while maintenance personnel carry out routine repairs. It is an alternative to the traditional transformer hot oil circulation drying and nitrogen filling methods. It is applies to air dry and cycle dry for warehouse, packaging, electronics and other industries. Sino-NSH-ADK maintains: -New technology with recycling sorbent flow. Sorbent serves long life. -Dew point: ≤-55℃ —-70℃ -Air pressure: adjustable from 0.02-0.8MPa -Air supply time: with no time limit -Minimum regeneration air consumption -Easy operation and maintenance -Safe and reliable

Minimum Order: 1 bags

Sino-NSH-LF oil flushing system is used to remove harmful contaminants for a large oil system, such as hydraulic control system, rotating equipment lubrication system, and turbine/generator unit, etc. It will keeps the equipment operating at peak performance and reducing the potential for failure. NSH oil flushing system adopts American advanced fast flushing technology, developing for a large oil system flushing tool, specifically for large-scale equipment. When flushing the system, it not only can purify particles, fibers,clay or even water and a variety of pollutants in the oil, but also a large number of oil need for rapid purification of the occasion. LF series has high efficiency, low cost, easy operation, safety and reliability. Sino-NSH-LF maintains: -Large flow rate and high efficiency -Double-stage precision filters -Efficient heating process -Ease of use and maintenance

Minimum Order: 1 bags

N95 N99 Standard Full Automatical 880mm Online Water Electret Melt Blown Fabric Producion Line V.0 Product Details: The PP meltblown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self- adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. Applications of Tongwei Meltblown Fabric ● Medical supplies surgical masks, disposable surgical drapes, surgical drapes, shoe covers, etc. ● Sanitary materials Baby diapers, adult incontinence pads, women's sanitary napkins, other cleaning applications, etc. ● Packaging supplies Shopping bags, rice bags, tea bags, clothing packaging, etc. ● Household products Spring cloth, bedding, seat products, etc ● Sanitary materials Baby diapers, adult incontinence pads, etc. ● Technical engineering Civil engineering, construction engineering, agricultural field, automobile field, etc. Technical Parameters: Model No. MY-880 Total Power 260kw Power Supply 380VAC Width of Nozzle 820mm Mechanical Line Speed 4-20m/min GSM Range 20-80g/m² Workers Needed 20-80g/m² Production Capacity 500-800kg/day Water Consumption 500kg/h Total Weight 2500kg Total Size 12m*2m*2.8m Components: ①　Meltblown Host ②　Electronic Control System ③　Roots Blower ④　Filter ⑤　Metering Pump ⑥　Spinneret ⑦　Meltblown Die ⑧　Suction Fan ⑨　Pure Water System ⑩　Vacuum Pump ⑪　Web Former ⑫　Drier ⑬　Slitter-rewinder More information please click here.

High Standard 1600mm Offline Water Electret Non Woven Machine V.0 Product Details: Melt Blown Cloth: PP is the main raw material of the melt blown cloth, and the diameter of the fiber can reach 0.5-10 μ m. These ultra-fine fibers with unique capillary structure increase the number and surface area of the fiber per unit area, so that the melt blown cloth has good air filtration, and is a relatively good mask material. In large and medium-sized medical institutions, in earthquake and flood affected areas, in SARS and avian influenza With the high incidence season of H1N1 virus, melt blown filter paper plays an irreplaceable role with its strong filtering performance. Melt blown cloth is mainly used for: a.Filter material b.Medical and health materials c.Environmental protection materials d.Clothing materials e.Battery diaphragm material f.Wiping materials We are Non Woven Machine Manufacturer. Advantage: ● High accurate raw material blender for polyproplyene and additives. ● High capacity extrusion machine with good screw and barrel. ● High performance melt filtration system. ● High Speed with high accurate melt pump. ● Lastest melt flow design and spinning system. ● Well-know PLC control system and motors. ● Smart operation program and monitoring syustem. Technical Parameters: Model No. MY-1600 offline V.0  Total Size 12M×5M×1.5M Total Weight About 3.5 tons Voltage 380VAC Total Power 260KW Use Power 200kw Mechanical Line Speed 4-20m/min Worker Needed 2 workers/shift Effective Width 1700mm GSM Range 15 ~ 80g/ ㎡ Production Capacity 800KG ~ 1500KG/Day Installed Power 260KW visit our website:https://www.twsmart-tech.com/

Directly Electret 1600mm Offline Water Electret Meltblown Machine V.1 Our latest research and development of the water electret online production line has high filtration efficiency and low resistane.The electrostatic retention is three times more than that of the electric electret. After the high temperature and high humidity aging test, the filtration efficiency will basically not decrease, The water electret technology can be directly Installed on the customer's original equipement with the addition, the output quality is higher and more stable, and it can guarantee to meet the European standard FFP2, FFP3 and other foreign inspection standards. Our company has an independent R&D team with mature technology for modification, processing and customization, and a high qulity stability. The company provides full technical support to ensure that the partners produce standard FFP2, FFP3 meltblown fabric. The stable output of 880mm water electret melt blown fabric is 500 kgs/day. Product Feature of Melt Blown Fabric Produciton Line ● The whole line is well-structured and easy to operate. ● The whole line is highly automated. ● Control Elements are brand products, high performance and reliable technologies ● We offer meltblown production line including the designing, producing, installing and testing. Applications of Tongwei Meltblown Fabric → Barriers&Filter Properties ● Sanitary Products Baby and child hygiene Female hygiene Incontinence products Pads ● Absorbing pads Function inserts for controlled absorption Absorbents Absorbent cloths and wiping cloths Media for oil absorption Liquids(benzene, water, blood) ● Filtration Gas Air Liquids (benzene, water, blood) Technical Parameters: Model No. MY-1600 offline V.1  Total Size 7M×5M×2.6M Total Weight About 4 tons Voltage 380VAC Total Power 230KW Use Power 180kw Mechanical Line Speed 4-20m/min Worker Needed 2 workers/shift Effective Width 1700mm GSM Range 15 ~ 80g/ m² Production Capacity 800KG ~ 1500KG/Day Installed Power 230kW

Air Casters rigging systems moving heavy duty loads with the power of compressed air, no spark, save cost, easy to operate. Air Casters skids is omnidirectional, flexible to change direction. Air bearing casters the power is compressed air, is environmental friendly. Air Powered Heavy Load Moving Equipment Systems Air Casters rigging systems easy to use, anyone can operate easily with no need special training. Regarding Air Casters skits a

Minimum Order: 1 bags