Industrial Machinery & Equipment

The HUF-2880 ultrafiltration membrane components are suitable for systems with a capacity greater than 50m³/hr (220gpm). The larger diameter membrane components (8 inches) have the largest effective membrane area among hollow fiber ultrafiltration membrane products, allowing for more economical system design. Compared to longer membrane components, shorter membrane components (60 inches) provide higher separation efficiency and can adapt to a wider range of water quality. Performance Features Ultrafiltration membrane components are made of high-strength PVDF material and have the following outstanding features and advantages: ● A nominal pore size of 0.03μm effectively removes bacteria, viruses, and particulate matter, protecting downstream equipment and reverse osmosis (RO) processes. ● The PVDF composite hollow fiber has high strength and excellent chemical resistance, extending the service life of the membrane components. ● The hydrophilic PVDF fiber is easy to clean and maintain, ensuring long-term performance stability.

Ultrafiltration (UF) membrane components are made of high-strength PVDF material, and their membrane fibers have the following characteristics and advantages: ● A nominal pore size of 0.03μm can remove bacteria, viruses, and particulate matter, protecting downstream equipment and reverse osmosis systems. ● High-strength, chemical-resistant PVDF composite hollow fiber membrane ensures a longer service life of the membrane components. ● The hydrophilic PVDF fiber membrane is easy to clean and wet, maintaining excellent performance over the long term. ● The external pressure structure can withstand higher influent suspended solids concentration and reduce pretreatment processes. ● The use of U-PVC material for the membrane shell eliminates the need for expensive pressure vessels. The HUF-2860 ultrafiltration membrane components are suitable for systems with a capacity greater than 50m³/hr (220gpm). The larger diameter membrane components (8 inches) have the largest effective membrane area among hollow fiber ultrafiltration membrane products, allowing for more economical system design. Compared to longer membrane components, shorter membrane components (6 inches) provide higher separation efficiency and are suitable for a wider range of water quality.

The FR (Fouling Resistant) series anti-fouling membrane elements are our company's independently developed composite membrane elements, featuring low operating pressure, high production capacity, and high salt rejection. The membrane surface has been modified with an anti-fouling patent technology to change the surface charge characteristics, increase hydrophilicity, reduce pollution and microbial adhesion, lower membrane fouling, extend service life, and use a 34mil wide channel design to reduce pressure loss and improve cleaning recovery. The Reverse osmosis membranes are suitable for water with low salinity (below 500ppm) such as municipal water and industrial water sources, mainly used for various scales of municipal water, boiler feedwater, and cooling water treatment, especially for slightly organic polluted water sources. Membrane Element Model Effective Membrane Area (ft²/m²) Average Water Production (GPD/m³/d) Stability of Salt Rejection (%) Minimum Salt Rejection (%) HRLE10 400 (37.2) 11000 (41.6) 99.5 99.2

Sunbo Machinery 8/6 Warman Pump– High-Performance Slurry Pump for Mining & Industry Sunbo Machinery Slurry Pump China Manufaturer, Sunbo Machinery is a leading China manufacturer of high-performance slurry pumps, offering the HS series heavy duty slurry pump as a reliable replacement for the Warman 8/6 AH slurry pump. Our 8/6 Warman pump replacement is designed to provide equivalent performance and durability, delivering exceptional results for the continuous pumping of highly abrasive, high-density slurries with minimal maintenance requirements. The HS 8/6 slurry pump maintains high efficiency over the wear life of its components, making it a top choice for heavy-duty applications such as mineral processing, sand plant duties, recycling, chemical processes, and mining operations. Why Choose Sunbo Machinery's 8/6 Warman Pump Replacement? Equivalent Performance: Our 8/6 Warman pump replacement matches the performance of the original Warman 8/6 AH pump, providing consistent efficiency and reliability. Durable Construction: Made with high-chrome materials, rubber, and polyurethane for superior wear and abrasion resistance. Flexible Application: Suitable for various tasks including mill discharge, coarse sand processing, mineral concentration, coal washing, FGD, chemical processes, and more. Versatile Seal Options: Available with packing seal, expeller seal, and mechanical seal to meet diverse operational requirements. Easy Maintenance: Designed for easy adjustment and replacement of components, reducing downtime. Features of the HS 8/6 Warman Pump Replacement Horizontal Cantilever Design: Allows slurry to enter from a single suction side for efficient pumping. Double-Casing Construction: Made of ductile iron, capable of withstanding high pressure. Customizable Impeller Options: Optimized for different operational requirements. Multiple Seal Types Available: Including packing seal, expeller seal, and mechanical seal for improved leakage prevention. Adjustable Discharge Outlet: Eight positions at 45-degree intervals to suit various installation requirements. Pump Range: Discharge Size:1"to 18" Capacity:4 to 5400m³/h Heads:5 to 75m Performance Comparison & Applications The HS 8/6 slurry pump replacement is the perfect solution for customers looking for a cost-effective, high-performance alternative to the Warman 8/6 pump. Its performance curve, design, and durability make it suitable for demanding applications like: Mining Mineral Processing Sand Plant Duties Chemical Processes Coal Washing Heavy Media Separation Tailings and Slurries Handling Benefits of Using Sunbo Machinery’s Warman 8/6 Pump Replacement Perfect Compatibility: Designed to be a drop-in replacement for the original Warman 8/6 pump, providing the same high-quality performance. Cost-Effective Solution: Achieve excellent results at a lower cost compared to the original Warman pumps. Longer Service Life: Enhanced wear-resistant materials ensure prolonged operation under harsh conditions. Easy Maintenance & Repair: The double-casing design allows quick access to parts, reducing downtime and maintenance costs. Order Your 8/6 Warman Pump Replacement Today! Sunbo Machinery provides a reliable alternative to the original Warman 8/6 pump, delivering equivalent performance at a competitive price. Contact us today to discuss your specific requirements and find out how our high- performance slurry pumps can enhance your operations.

ZJ Series Coal Slurry Pump: High-Efficiency Solution for Abrasive Slurries Introduction to ZJ Series Coal Slurry Pumps The ZJ Series Coal Slurry Pump is a single-stage, single-suction, double- casing centrifugal horizontal slurry pump designed to handle highly abrasive and corrosive slurries. Engineered for optimal performance under various industrial conditions, these pumps are widely used in coal washing, mining, power generation, and metallurgical industries. Their adaptability to different speeds ensures efficient slurry transportation with minimal energy consumption. ZJ Pump is widely used in metallurgy, mining, mineral processing, dredging, de- watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material...etc. various industrial sites. For different duties, pump is named as High head pump, High pressure pump, Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump,Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump.   Specification: Flow rate: 4.5m³/h~4000 m³/h, Head: H=6m~134m, Speed: n=590～2950r/min, Operating temperature: T ≤ 100 ℃   Key Features of the ZJ Series Coal Slurry Pump： ● High efficiency; energy-saving; light weight; reasonable construction; reliable performance; little vibration; low noise; easy maintenance. ● Various design of the pump speed and versions enable the pump to work even under poor conditions. ● The bearing layer and the wear layer can be separated. And the wet parts are made from strong abrasion resistance high-chrome alloy cast iron. ● Three types of shaft seals, mechanical seal, packing seal and packing combined expeller seal can be adopted. ● The pump discharge can be positioned to 8 directions at intervals of 45 degrees according to need. The inlet is horizontal. ● The medium transferred temperature should not exceed 60ºC. The weight concentration of the mortar should not exceed 45%; mineral slurry, 60%. ● The pumps can be installed in multi-stages for long distance delivery. ● Drive mode: mainly direct connection(DC). ● Lubricating way: 40ZJ-200ZJ adopts grease or oil lubrication according to bearing box structure; 250-500ZJ adopts grease lubrication. Applications of Coal Slurry Pumps in Industrial Settings 1. Coal Washing & Processing Coal slurry pumps play a critical role in coal preparation plants, transporting coal fines, tailings, and dense media. These pumps handle high- density coal slurries, ensuring efficient separation and processing. 2. Power Generation Power plants use coal slurry pumps for handling fly ash, bottom ash, and coal-water mixtures, reducing waste and improving operational efficiency. 3. Mining & Mineral Processing In mining operations, ZJ series pumps transport ore slurries, tailings, and thickened concentrates, ensuring a steady flow of materials during extraction and processing. 4. Chemical & Metallurgical Industries These pumps handle abrasive chemical slurries, metal processing residues, and byproducts in metallurgical plants and chemical industries. 5. Dredging & Sand Handling With their high-abrasion resistance, ZJ slurry pumps are widely used in dredging, sand mining, and gravel processing. Why Choose the ZJ Series for Coal Slurry Pumping? · Engineered for Harsh Environments – Built for high-density coal slurries, ensuring maximum wear resistance. · Customizable Seal Options – Available with mechanical seals, packing seals, or combined expeller seals. · Heavy-Duty Bearings & Lubrication – Ensuring long-term, stable operation under extreme conditions. · Global Supply & Support – Trusted by industries worldwide for coal washing, power plants, and mining applications. Get the Best Coal Slurry Pump for Your Operation! For inquiries, custom specifications, or a quote, contact our experts today.

It is suitable for conveying liquids containing solid particles such as sand, coal slag, tailings, etc. It is mainly used for the removal and transportation of slurry liquids in metallurgy, mining, thermal power plants and other enterprises. It is an ideal substitute for traditional mud pumps. In addition to the main impeller, a set of stirring impellers are added to the bottom of the pump, which can spray the deposited sludge into turbulent flow. The pump can achieve high-concentration transportation without auxiliary devices. The operating reliability of the unique sealing device greatly extends its service life. The electrode adopts overheat protection, and various protection devices such as near-water detection can be added according to user requirements, which can operate safely under severe working conditions. Performance parameters: Flow range: 15-2000m3/h Head range: 10-95m Power: 7.5-315kw Maximum passing particle size: 92mm Material: High chrome alloy, SS304, SS316, SS316L, etc Features: ★ The motor is protected by a mechanical seal, which can effectively prevent high-pressure water and impurities from entering the inner cavity of the motor. ★ In addition to the main impeller, there is also a stirring impeller, which can stir the sludge deposited on the bottom of the water into a turbulent flow and then extract it. ★ The main flow parts such as impeller and stirring impeller are made of high wear-resistant materials, which are wear-resistant, corrosion-resistant, non- clogging, and have strong sewage discharge capacity, and can effectively pass larger solid particles. ★ It is not limited by the suction range, the slurry suction efficiency is high, and the silt dredging is more thorough. ★ There is no need to equip auxiliary vacuum pump, so the investment is lower. ★ There is no need to be equipped with auxiliary stirring or spraying devices, making the operation easier. ★ The motor is submerged under water, no complicated ground protection and fixing devices need to be built, and the management is easier. ★ The stirring impeller directly contacts the deposition surface, and the concentration is controlled by the depth of the dive, so the concentration control is more free. ★ The equipment directly dives into the water to work, there is no noise and vibration, and the site is more tidy.

The SF foam pump is robustly constructed, designed for continuous pumping of highly abrasive and corrosive foamy slurries. SF mining flotation process pump is equivalent to Warman AF series foam pump. SF vertical foam pumps are designed to efficiently treat foamy sludge by deaerating the foam, through an induced vortex effect, before it enters the pump impeller. It has a vertical shaft configuration and includes a hopper, with a set of vertical bearings and a "HS" type pump wet end. It features a wide choice of covers and replaceable abrasion-resistant metal or molded rubber wheels. Warman Froth Pump Model: 2QV-AF, 3QV-AF, 4QV-AF, 6SV-AF, 8SV-AF Important design features of this pump range include: ★ Cartridge type bearing assembly ★ Robust threaded turbine attachment ★ Through-bolt design throughout ★ Replaceable case liners ★ Choice of metal or rubber coating and wheel ranges ★ Minimum number of housing bolts

The SAHF Horizontal Froth Slurry Pump is pumping slurry with obstinate froth, which is equivalent to warman Froth Pump AHF Series. It is specially design for handing foam and solid slurry mixture. Design features: Take a small bulk, high efficiency. Special froth impeller with large inlet size, this benefit to the large size solids. There is difference between pumping froth slurry and normal slurry. The horizontal froth slurry pump is upto high performance to pump high viscosity slurry. The problem of handling froth in some process circults can be very frustrating. Froth often will air bind a standard pump. The froth inducer blade impeller solves this problem. ● The pump inside liner is corrosion resistant rubber material or metal. ● The impeller is anti-abrasive type high chrome metal impeller or rubber, or mixed assembly. ● Small structure but high efficient. ● Low power costs, reliable operation, minimal surging, and feed tank overflow make horizontal froth pumps    user friendly. ● Simplified maintenance. Applications ● Suitable for various liquids performance, which is the first select product for handling mine mill slurry and     tailing slurry. ● Basing on medium condition can choose different materials as A05, A07, A49 etc. ● Iron Ore Dressing Plant ● Copper Concentration Plant ● Gold Mine Concentration Plant ● Molybdenum Concentration Plant ● Potash Fertilizer Plant ● Other Mineral Processing Plants ● Other industries

Features   Full automatic terminal crimping machine, using high-tech frequency conversion technology, electronic precision positioning, when pressure welding machine working noise is smaller than the traditional terminal, and save electricity, the variable is more convenient and quick, avoid the traditional terminal clutch,   cable lug crimping machine   Specifications: full automatic terminal crimping machine   1. Full automatic terminal crimping machine 2. Built-in frequency converter, high speed and low noise 3. One machine is suitable for various terminals, very easy to change mold. 4. Support manual mode and automatic mode, you can adjust the machine easily in manual mode. 5. LED display will show how many terminals have been crimped. 6. Speed is adjustable, crimping die designed according to your requirement. Parameter Size:720L*850 , W*1650H Weight:265KG Display:Color LCD touch screen Mode of operation:Auto run + manual operation Blade adjustment method:Motorized adjusting Blade material:Swedish ASP60 powder high speed steel cutter materials Wire stripping/tin length:4mm-10mm Suitable wires:AWG18—28# cutting speed:4300 PCS/hour working ability:2200PCS/hour Crimp force:standard 2.0T Other pressure relays need to be customized Air pressure:5.0KG (stability, dry air) Power:AC 220V Rated power:2.5KW Detector:1.terminal exists or not 1.wire exists or not 3.press exists or not 4.air pressure exists or not

Minimum Order: 1 bags

Features   Full automatic terminal crimping machine, using high-tech frequency conversion technology, electronic precision positioning, when pressure welding machine working noise is smaller than the traditional terminal, and save electricity, the variable is more convenient and quick, avoid the traditional terminal clutch,   cable lug crimping machine   Specifications: full automatic terminal crimping machine   1. Full automatic terminal crimping machine 2. Built-in frequency converter, high speed and low noise 3. One machine is suitable for various terminals, very easy to change mold. 4. Support manual mode and automatic mode, you can adjust the machine easily in manual mode. 5. LED display will show how many terminals have been crimped. 6. Speed is adjustable, crimping die designed according to your requirement.  

Minimum Order: 1 bags

Product Details: full-automatic flat cable terminal crimping machine Specification: 1.6100pcs/hour,full-automaticall , y one end terminal crimping,stripping two ends of terminal. 2.High definition LED screen display,language of HMI can be customized as customer’s need, 3.Full automatically computerized,accurate parameter debugging 4.Complete Detection function:wire detection,terminal detection,alarm when machine run wrong 5.OTP transverse mode and Direct mode change easily,automatic receive wastes of terminals, cut wastes of terminals   Automatic terminal crimping machine(One end of terminal crimping) Charactors:Cutting wire,stripping of wire(Single-end and two ends stripping),Single-end crimping,Single-end twisting,,Multi-style of peeling wire   Parameter: Model HL-01 Suitable wire range: AWG16#--AWG28# Speed :4000-6000pcs/hour Cutting length:20-9999mm Cutting accuracy :1mm+Cutting Length below 0.2% Stripping length :0.1mm-10mm Air pressure :0.4-0.6Mpa Crimping capacity :2 tons Detection function: wire or not, blocked, etc Voltage :AC 220V 50Hz/ 60Hz Dimensions: 700X600X1500mm

Minimum Order: 1 bags

HW200A-S series high-pressure plunger pump is a kind of ultra-high-pressure plunger pump, which adopts the technical characteristics of imported products for reference. The pressure of the pump is 160MPa and the flow rate is 33-93L/min, which is required by high-pressure water jet, Suitable for ultra-high pressure water jet cleaning, metal cutting, ship cleaning rust and chemical plants, sugar plants, power plants and other condenser, heat exchanger,evaporator, boiler and other tank tank cleaning. This series of products can transport 0 ~ 50℃ water, emulsion, and other chemical property similar to water liquids.

Minimum Order: 1 bags

HW250E-S series high pressure plunger pump is a new generation high pressure plunger pump independenty developed by our company. The pressure can reach 275 MPa. Technical features: 1. Straight-through hydraulic end, advanced technology,reasonable design, higher volumetric efficiency. 2.Polymer sealing material, self-adjusting pre-tightening force with pressure, sealing automatic compensation 3.Cemented carbide plungers are rugged durable. 4.Easy Maintenance, one person can complete the hydraulic end maintenance and replacement of wearing parts. 5.The hydraulic end parts are made of precipitated hardened martensitic stainless steel, which are reliable and durable. 6.This product is matched with the new diaphragm type safety valve (original imported diaphragm) , easy to operate, safe and reliable. This series of products can transport 0 ~ 50℃ water, emulsion, and other chemical property similar to water liquids, This series of high pressure pumps are widely used in jet cleaning, power, powder metallurgy and other industries.

Minimum Order: 1 bags

Cty5 Ton Battery Electric Locomotive for Coal Mine Using the IGBT or AC frequency controller,stable starting and high traction effort, battery long life, locomotives' low center of gravity. 5 ton Battery locomotive Adhesive / total weight (t) 5 ton Track gauge (mm) 600.762.900 Traction (KN) 7.06 Cty5 Ton Battery Locomotive for Coal Mine with Factory Price Max. Traction (KN) 12.26 Speed(km/h) 7 Voltage (V) 250V Power (KW) 7.5 KWx2 Dimensions Length(mm) 3170 Width(mm) 920,1082or 1220 Height(mm) 1550 Wheelbase (mm) 850 Wheel diameter (mm) 520 Min Curve radius (m) 6 Controller Resistencia or IGB or VF controller Braking method Mechanical/Hydraulic brake FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarante the power of the locomotive. 1.Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. 2.After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. 3.Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock 4.Shipping method: Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. 5.Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 6.After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded). b. Technical Support will be available in any time. c. Free replacement will provide once the failure confirmed caused by our product quality.

Minimum Order: 1 bags