Iron & Steel

Stainless steel welded wire mesh is strong and long lasting. Stainless steel wire needs no additional finish, such as galvanizing or PVC, to protect it. The wire itself is extremely resistant to rust, corrosion and harsh chemicals. If you need a welded mesh or fence in an area with prolonged exposure to corrosive environments, stainless steel mesh products will meet the demands. Type 316 is recommended for salt water environments since it has a higher resistance to corrosion than Type 304. Material: stainless steel wire 304, stainless steel wire316, etc. Advantages: - Flat & even surface and strong structure - Anti-rust property - High intensity anti-high temperature. - Better strength and strong integration - Not easy to loosen even be cut into parts or exerted force on the parts - A long service life and the service life can reach to several decades. Classification: 304 316 3/4 inch stainless steel welded wire mesh rolled; 5x5 4x4 welded square stainless steel wire mesh; 3.5mm 4.0mm 4.5mm 6x6 reinforcing stainless steel welded wire panels; 304 316 3/4 inch stainless steel bird cage welded mesh; SS 8 gauge welded wires; 1/2" x 1/2" stainless steel fence wire mesh.

304 304L stainless steel coil 6.0mm 2000mm Hot Rolled For Construction Dual certified 304 304L Type 304/304L is non-magnetic in the annealed condition but may become slightly magnetic as a result of cold working. Type 304L can be dual certified as 304 when the composition meets the lower carbon limit of 304L and the slightly higher strength levels of 304. Product Details Grades 301 304 304L 316L 310S 309S 321 317L Widths 2000mm Thickness 6.0mm(0.2-6.0mm) Surface finishes 2B/BA/No.4/HL/Mirror surface with the PE or Laser PE (With your requirement) Packing Hermetic protective packaging for ocean freight; on fumigated wooden pallet. Other packing options on request. Difference between cold rolling and hot rolling The stainless steel coil has two opposing technologies. When it exceeds the phase transition temperature of 912 degrees Celsius, it is hot processing, and when the temperature is lower than this temperature, it is cold processing. Cold-rolled Stainless steel plate:Cold-rolled Stainless steel plate is a stainless steel plate produced by cold-rolling process. Used to make corrosion- resistant parts, pipelines, containers, medical equipment, marine equipment, etc. Divided into austenitic steel, austenitic-ferritic steel, ferritic steel, martensitic steel. Hot rolled Stainless steel plate :After the straight hair coil is processed by a finishing line such as head cutting, tail cutting, edge trimming, and multi- pass straightening and leveling, then it is cut or re-coiled to become; hot- rolled stainless steel plate. It has a smooth surface, high plasticity, toughness and mechanical strength, and is resistant to corrosion by acids, alkaline gases, solutions and other media. It is an alloy steel that is not easy to rust.

Stainless steel sheet or plate is an alloy steel that is not easy to rust. Its surface is smooth and clean, and with high plasticity, toughness and mechanical strength, acid and alkaline gas resistance. We have many stainless steel plates in different specifications and different materials and it can be customized according to customer requirements. Stainless steel sheet has many materials 201 301 304 304L 321 316 316L 309S 310S 904L 316Ti 317L 317H 304H SUS 304 etc, and have many different surfaces such as 2B BA 8k mirror and so on. Grade 300 Series Standard BS EN GB AISI ASTM DIN JIS Length As Required Thickness 1-100mm Width <1500mm Model 316l Type Hot Rolled Stainless Steel Application Construction, Industry Tolerance ±1% Processing Service Bending, Welding, Uncoiling, Punching, Cutting, Wire Drawing, Polishing Surface Treatment 2b Minimum Order Quantity 1 Ton/1000 Kg Package Standard Seaworthy Packaging

Hebei Jianping Wire Mesh Manufacturing Co., ltd. was located in anping county hebei province which is named the HOMETOWN OF WIRE MESH in China. Started its overseas trading business in 2012, it has always been professional in building decorative field. Our main products are stainless steel wire rope mesh, a kind of mesh made by hands which is also CE certificated. Stainless steel cable woven mesh a variety of colors: natural color stainless steel wire rope mesh, black stainless steel wire rope mesh, bronze stainless steel wire rope mesh. Jianping zoo mesh factory is China's most professional, the largest stainless steel wire rope woven mesh production enterprises. The annual production of stainless steel wire rope woven mesh is more than 180,000 square meters, by more than 400 users trust. Since its inception, the company has continued to invest in research and development to improve stainless steel wire rope woven mesh products. Zoo mesh manufacturer, complete specifications, sold throughout the country, and exported to all over the world, zoo safari, ocean park, sports venues building decoration industry, etc. We always regard our customers as the most commendable and valuable customers. We are confident that with our reliable materials, quality assurance. We can definitely provide you with accurate products, meet your requirements. If you are interested in any of our products, or looking for a reliable and stable supplier to complete your project, please feel free to contact us to discuss your request. We are always getting valuable experience on the production and sales, and there are big breakouts on design, sale and after-sale service. Our products have been shown in the markets of Australia, USA, France,Spain, Mexico, Denmark, Sweden, Japan, South Korea, India, Singapore, Kuwait. In line with the aim that lived with credit, developed with quality, Hebei Jianping Wire Mesh Manufacturing Co., ltd. Welcome the cooperation from the world on the base of mutual trust ad mutual development! We have a very strict QC system and check carefully before, during and after the mesh production. We sincerely welcome customers at home and abroad to establish and develop business cooperation.

Gi Sheet Zinc Coated 24 Gauge Zero Spangle Galvanized Steel Plate Our products are widely used in machinery, chemicals, petroleum, boilers, heat exchangers, food machinery, beverage machinery, medical equipment and other industries. We has a strong customer base across the world and keep pace with the times and continue Product name Galvanized Steel Coil/Sheet Material SGCC,SGCD,SPCC,SGHC,Q235,DC51D,DX51D,G350,G450,G55 , 0... Standard ASTM A240,GB/T3280-2007,JIS4304-2005,ASTM A167,EN10088-2-2005, DIN,BS ,AS etc Zinc Coating 20-120g/m2 Thickness 0.18-2.0 mm Width 600-1250 mm Coil ID 508/610mm Coil weight 3-8 tons Surface Structure Mini/Big Spangle Surface Treatment Anti-Finger printing ,Chromated, oiled/ non-oiled Certificate ISO9001 & SGS&BV Package standard export package (Detailed picture is as follows) Hardness soft (normal), hard, full hard(G300-G550) Brand name BAIYONG Country of origin China Business type Supplier and manufacturer

Stainless Steel Sheet Stock Thickness and Sizes Stainless Steel Sheets Sizes in Stock : 2400 X 1200 / 3mm Thick / 4x8 / 4mm / 5mm / 5mm Thick / 5mm Weight / 6mm / 60 X 120 / 8' X 4' / 36 X 36 / 24 X 48 / 5 X 10 / 48 X 96 / 18 X 18 / 0.5mm / 0.3mm / 0.2mm / 0.1 Mm / 1.5mm / 0.9mm / 0.8mm / 0.7mm / 0.25mm / 0.4mm / 0.5 / 1mm / 1.5mm / 2mm / 2b Finish / 10mm Thick / 1.2mm / 16 Gauge / 18 Gauge / 12 Gauge / 14 Gauge / 20 Gauge / 22 Gauge / 24 Gauge / 26 Gauge / 2.5mm / 2b / 3mm 8 X 4 / / 8mm AISI SUS 4*8 5*10 0.3mm 0.5mm 0.8mm 1.0mm 1.2mm 1.5mm 2mm 3mm 201 J1 J2 304 304L 316 321 Stainless Steel Sheet Grade 201/202/301/303/304/304L , /316/316L/321/310S/401/409/410/420J1/420J2/430/439 , /443/ 444 Surface Finish 2B, BA, NO.1, NO.4, 8K, HL, Embossing, Satin, Mirror, ect Standard JIS/SUS/GB/DIN/ASTM/AIS , I/EN Technique Cold Rolled; Hot Rolled Thickness 0.3-4mm cold rolled; 3-16mm hot rolled; 16-100mm hot rolled; Customized according to customer requirements Width 1000mm, 1219mm, 1240mm, 1500mm, 1800mm, 2000mm Length 2000mm, 2438mm, 2500mm, 3000mm, 6000mm or as required Color Golden, Black, Sapphire Blue, Brown, Rose Gold, Bronze, Silver, ect Application Interior/Exterior decoration; Architectur; Evevator; Kitchen; Ceiling; Cabinet; Advertising nameplate; Roof structure; Shipbuilding Lead Time 7-15 working days after the receipt of 30% deposit Payment Terms 30% TT for deposit,70% TT /70% LC at sight balance before shipment Price Terms FOB, EXW, CIF, CFR Packing Wooden Pallet or according to customer's requirements

Car Industry Hot Rolled NO.1 202 Stainless Steel Sheet Plate With 3*4 Feet Size 1. 202 stainless steel sheet product details Name Stainless steel sheet Plate Grade 202 Standard JIS, AISI, ASTM, DIN, TUV, BV, SUS, etc Thickness 0.3mm - 3mm Width range 600mm - 1500mm Technology Hot Rolled Type Steel Plate Finish 2b, BA, No.4, 8k, hairline, embossed, etched, vibration, pvc color coated, titanium, sand blasted, anti-fingerprint The sizes or length of stainless steel sheet can be customized, if you need additional information, please don’t hesitate to contact us at any time. 2. Stainless steel composition Grade C SI Mn P S Cr Ni Others 202 ≤0.15 ≤1.00 7.50-10.00 ≤0.060 ≤0.030 17.00-19.00 4.00- 6.00 N≤0.25 204 ≤0.15 ≤1.00 8.5-12.00 ≤0.060 ≤0.030 17.00-19.00 4.00- 6.00 N:0.20-0.30 301 ≤0.15 ≤1.00 ≤2.00 ≤0.065 ≤0.030 16.00-18.00 6.00-8.00 302 ≤0.15 ≤1.00 ≤2.00 ≤0.035 ≤0.030 17.00-19.00 8.00-10.00 303 ≤0.15 ≤1.00 ≤2.00 ≤0.20 ≤0.030 17.00-19.00 8.00-10.00

Galvanized concrete nails refer to the most common concrete nails widely used. Made of high quality carbon steel, zinc plated. Common galvanized concrete nails have smooth shank and round cap. We mainly supply galvanized concrete nails with no head, galvanized concrete nails twilled shank and smooth shank. Galvanized Concrete Nails with No Head are made of cold drawn high quality carbon steel materials, heavy galvanized. Smooth shank, no head. Concrete nails with twilled shanks are made of high quality carbon steel. It offers good corrosion resistance and good strength. With round nail caps and twilled shanks. Construction Materials of Galvanized Concrete Steel Nails. Head/tip style: Flat head. Raw Material: Steel. Length: 2,3,4 Inches. Shank Type: Smooth. 2'' Carbon Steel/ Stainless Steel Smooth Shank Galvanized concrete nail/cement nails for Building Construction. Common specifications for galvanized concrete nails: Wire Gauge 9G x Length 3／4", Wire Gauge 9G x Length 1", Wire Gauge 9G x Length 1-1／2", Wire Gauge 9G x Length 2", Wire Gauge 8G x Length 2-1／2", Wire Gauge 7G x Length 3", Wire Gauge 7G x Length 3-1／2", Wire Gauge 6 x Length 4".. Galvinised nails (Smooth & ring shank) 90mm 2000 in a box + 2gas ,75mm,64mm and 50mm 1" to 4.5" galvanized concrete nails 1" to 4.5" galvanized concrete nail Galvanized Nails/Fasteners – Green PMS 363 • Hot dipped roofing nails • Eg/Hot dipped Common Nails smooth • Eg/Hot dipped Common Ring shank Nails • Eg/Hot dipped gutter spikes • Hot dipped Ring shank pole barn • Hot dipped ring/Spiral shank PTL deck nail • Eg/Hot dipped Box nail • Eg/Hot dipped Fence staples • Eg/Hot dipped finish nails • Eg/Hot dipped casing nails • Eg/Hot dipped Joist hanger (truss nails)

This type of iron nails is made of cold drawn high quality carbon steel materials, heavy galvanized. Smooth shank, no head. Common specification of concrete nails with no head: Nail diameter 1．6 mm x Length 20mm Nail diameter 1．6 x Length 25mm Nail diameter 1．7 x Length 30mm Nail diameter 2. 0 x Length 40mm Nail diameter 2．0 x Length 50mm. Galv concrete nail, no head, smooth shank 2 x 20 mm 2 x 25 mm 2 x 30 mm Galv concrete nails , lost head , smooth shank 1. 6 x 20 mm 1. 6 x 25 mm 1. 7 x 30 mm Packing :- 1kg / small box net / carton , then by container . SS Nail 1.7 mm Dia, 25.4 mm ( 3 mm taper pin length out of 25.4 mm) moc SS316, WITHOUT HEAD -Galvanized Concrete Nails with No Head.

Black concrete nails are made from black carbon steel wires. We have several shank types for black concrete nails including smooth shank, ring shank, twisted shank, twilled shank. The head types of black concrete nails can be headless, round head, etc. It offers good corrosion resistance and good strength. We offer black concrete nails with typically the following specifications:Black Concrete Nails Nail Wire Diameter: 1.2mm to 5.0mm Nail Length: 12mm to 254mm Material: #45 high grade carbon steel Finish: zinc plated, black concrete nail Package: 25kg/ carton Application: Black concrete nails, like concrete nails of other materials, are mostly used for screwing and fastening of firm and strong sites. Since 2020, we have customized nails products for customers all over the world, such as Black steel concrete nails, sizes l inch to 4 inch, concrete nails galvanized with and headless in sizes l inch to 4 inch, cement concrete nails, other concrete nails all galvanized in sizes l-l/2 inch to4 inch, common nails in sizes l-l/2 inch to 4 inch, black steel concrete nails must be packed one l kilogram to a display box, all other nails are packed 25 kilogram strapped strong export cartons. galvanized or copper GALVANIZAED STEEL CONCRETE NAIL: 1”, 1-1/2”, 2”, 2-1/2”, 3”, 3-1/2”, 4” BLACK STEEL CONCRETE NAIL: ¾”, 1”, 1-1/2”, 2”, 2-1/2”, 3”, 3-1/2”, 4” 100pcs per small box for Hardened Black Steel/ Concrete/masonary Nails, hardness of 52-54 HRC / anti corrusion, for followin sizes: 2.5x25mm 3x30mm 3x40mm 3x50 , mm 3x75mm 4.2x100mm Concrete nails Black and HDG in 5 kg boxes, 2.2/30 mm, 2.2/40mm, 3.4/50mm, 3.4/60mm and 3.4/70mm Black concrete nail glavnised finish for the below sizes. 2.5 x 25 mm x 100 pcs per box x 100 box per ctn. 3.0 x 30 mm x 100 pcs per box x 100 box per ctn 3.0 x 40mm x 100 pcs per box x 100 box per ctn 3.0 x 50 mm x 100 pcs per box x 80 box per ctn 4.2 x 80 mm x 50 pcs per box x 30 pkts per ctn 4.2 x 100 mm x 50 pcs per box x 25 pkts per ctn Material and finish is good

Material quality shall be Q235 CERTIFICATE of wire rod producer. HTS #: 7317002000 Wire collated ring shank nails in coils, 9m/ctn,size 2.5/60. Wire collated ring shank nails in coils, size 2.1/30 Wire collated ring shank nails in coils, size 2.1/32. Wire collated ring shank nails in coils, size 2.1/35. Wire collated ring shank nails in coils, size 2.1/38. Wire collated ring shank nails in coils, size 2.1/50. Water proof multi-layer polymeric polypropylene. Wrapping to be suitable to protect GOODS from any damages and rust during ocean transportation in container. PACKING: One 20’ container: with 6 European standard wooden pallets with stamps of fumigation. Each pallet shall be stacked up by 40 cartoons from high density cardboard with thickness not less 5mm. Each box contains 30 coils of nails size 2.5x60 per 300 pieces per coil (9M total each cartoon). With 1 European standard wooden pallet with stamps of fumigation. The pallet shall be stacked up by 56 cartoons from high density cardboard with thickness not less 5mm. Each box contains 40 coils of nails size 2.1x30 per 350 pieces per coil (14M total each cartoon). With 2 European standard wooden pallets with stamps of fumigation. Each pallet shall be stacked up by 56 cartoons from high density cardboard with thickness not less 5mm. Each box contains 40 coils of nails size 2.1/32 per 350 pieces per coil (14M total each cartoon). With 5 European standard wooden pallets with stamps of fumigation. Each pallet shall be stacked up by 48 cartoons from high density cardboard with thickness not less 5mm. Each box contains 40 coils of nails size 2.1/35 per 350 pieces per coil (14M total each cartoon). With 6 European standard wooden pallets with stamps of fumigation. Each pallet shall be stacked up by 48 cartoons from high density cardboard with thickness not less 5mm. Each box contains 40 coils of nails size 2.1/38 per 350 pieces per coil (14M total each cartoon). With 3 European standard wooden pallets with stamps of fumigation. Each pallet shall be stacked up by 40 cartoons from high density cardboard with thickness not less 5mm. Each box contains 30 coils of nails size 2.1/50 per 350 pieces per coil (10,5M total each cartoon). With 1 European standard wooden pallets with stamps of fumigation. Each pallet shall be stacked up by 48 cartoons from high density cardboard with thickness not less 5mm. Each box contains 30 coils of nails size 2.1/50 per 350 pieces per coil (10,5M total each cartoon).

Roofing nails are mainly used for building and construction, carpentry, upholstery andfurniture decoration. roofing nails have a larger head, allowing more surface.roofing nails may be used to install shingles and most roofing underlayments. the most common types of roofing nails are made from : aluminum, copper, stainless steel, or galvanized steel (zinc-coated) .full round head style, collation configuration coil, collation type wire, collation angle 15 degrees , shank dia. 0.120 in., 11 ga. gauge, length 3/4 in., diamond point type, smooth shank. Applications: for use in slate, synthetic slate, roof shingle applications, and other applications that require a larger head bearing surface coverage. Features: aggressive ring shank provides superior holding power; EG and HDG Roofing nails in 5 kg boxes 3.0/16mm 3.0/20mm 3.0/26mm < , br>Roofing nails Diamond point , twisted (plain shank ) , electro-galvanized , umbrella head . Size : bwg 9x2.5 inch , 3 inch ,2 inch or bwg 10 x 2 /2.5 /3 inch Packing : 25kgs net /carton 7lbs/ box 8boxes /carton Roofing Nails – Blue PMS 2935 • Eg Roofing Nails • Eg Plastic caps • Eg ring shank metal caps • Eg coil roofing • Stainless steel coil roofing • Eg Tile Nails • Wide Crown Roofing Staples • Bright Lead Head 1-1/4-in-Gauge-Degree Hot-Dipped Galvanized Steel Pneumatic Roofing Nails. Galvenised roofing nail with flat head Galvanized Steel Wire Collated Roofing Nails Nail Size : 1.5,2,3 and 4Inches per fcl.

Common nails are used for general construction and framing,also called common wire nails or construction nails, have straight shanks and flat heads.Galvanized coating and larger shank provide greater strength. conform to ASTM F1667. Specifications of Common nails Common nail :size: 2.5, 3 and 4 inch, Material: Q235 Tensile Strength: Not less than 435N/mm2 Finish: Polished Packing: 5kg/box 200Boxes/pallet 1.5" * BWG14 2.0" * BWG12 2.5" * BWG11 3.0" * BWG08 Common Nail Product Drawing Attachment Common-nail. Common-build , ing-nails (Polished, Clean) Referring to the product drawing, following important notes must be complied; 1.Minimum tensile strength must be 435N/mm2. 2.Dimensions must be complied within the tolerance as indicated in the drawing. 3.Nail head, diameter and length must be consistent. 4.Minimum gross weight must be 5kg/box. 5.The Common Nail must be free from rust and properly covered.

Complete specifications customizable 2A12 Aluminum coil Scope of application: The common T4 is its heat treatment supply mode, which means air cooling plus natural aging. 2A12 corresponds to American 2124 alloy, which is a typical duralumin alloy in the aluminum copper magnesium system. Its composition is reasonable and its comprehensive properties are good. Many countries produce this alloy, which is the largest amount of duralumin. The alloy is characterized by high strength and certain heat resistance, and can be used as working parts below 150 ° C. When the temperature is higher than 125 ° C, the strength of 2024 alloy is higher than that of 7075 alloy. Overview: Grade 2000 Series, 6063 6061 5005 5052 7075 Temper O-H112 Type Coil Application Industry, aircraft structures Width 10mm~2500mm Surface Treatment mill polish Alloy Or Not Is Alloy Tolerance ±3%