Measuring & Gauging Tools

ER-MG-056 (3°/h) 1. 3°/hr bias instability; 2. 0.25°/√hr angular random walk; 3. Economical MEMS. ER-MG-056 Economical MEMS Gyroscope Introduction The ER-MG-056 Low-cost & High-accuracy MEMS Gyro is a single-axis MEMS angular rate sensor, which can measure the maximum angular velocity of ±400°/s, and the digital output conforms to SPI slave mode 3 protocol. Angular rate data is presented as a 24-bit word. The ER-MG-056 is intended for industrial, instrumentation, stabilization, and other high performance applications. An advanced, differential sensor design rejects the influence of linear acceleration, enabling the ER-MG-056 to operate in exceedingly harsh environments where shock and vibration are present. The ER-MG-056 is available in a hermetically sealed ceramic LCC surface mount package, and is capable of operating at 5V supply and a wide temperature range (−50°C to +85°C). Features Proven and robust silicon MEMS gyro Up to ±400°/s measurement range 3°/hr bias instability 0.25°/√hr angular random walk Digital output (SPI slave) 5V operation (4.75~5.25V supply) Low power consumption (35 mA) High shock and vibration rejection Hermetically sealed ceramic LCC surface mount package (11x11x2mm) Integrated temperature sensor RoHS compliant Applications Precision instrumentation, stabilization Guidance, navigation, control Avionics, unmanned vehicles Precision autonomous machines, robotics

ER-2MG-01 (≤25º/h) 1. Small dimension; 2. Good Stability; 3. High performance. Dual Axis MEMS Gyroscope The Dual Axis MEMS Gyroscope has the characteristics of low power consumption, wide operating temperature range, wide bandwidth, small size, fast start-up, DC input and DC output, etc., and can be widely used in automotive electronics, aircraft guidance and control, attitude reference systems, platform stability, Robots, antenna stability, cameras, digital camera gyroscopes and other systems. Applications UAV (Unmanned Aerial Vehicle) Balance measurement

ER-MNS-05 (0.5°/1°): 1. Triaxial MEMS North Seeker; 2. Mini size and high performance; 3. Full temperature compensation. ER-MNS-05 Cost-Efficient Triaxial MEMS North Seeker https://www.ericcointernational.com/nort , h-finders/mems-north-finder/three-axis- mems-no , rth-seeker.html 1. Technical Features Triaxial MEMS gyro and accelerometer Full temperature compensation High performance and mini size Light weight, low power consumption -45 ℃ to +80℃ full temperature scale compensation 4KHz high-speed sampling Resistant to harsh mechanical environment Have software online upgrade function 2. Technical Advantages 1) The accuracy can be customized, also can be widely used in many fields ER-MNS-05 Triaxial MEMS North Seeker is a highly reliable and cost-effective combination of six-axis MEMS inertial sensors, which can be widely used in navigation, control and measurement fields represented by inertial navigation and attitude stabilization. ER-MNS-05 3 Axis MEMS North Seeker can be configured with different hardware and software according to the needs of users, so as to meet the needs of different users. 2) Advanced process and technology The ER-MNS-05 3 axis MEMS North Seeker integrates high-performance MEMS gyroscope and MEMS accelerometer in an independent structure. The gyroscope and accelerometer selected in the module represent the leading level of MEMS process inertial devices. The three-axis MEMS gyroscope is sensitive to the angular motion of the carrier, and the three-axis MEMS accelerometer is sensitive to the linear acceleration of the carrier. The zero position, scale factor, non-orthogonal error and acceleration related terms of the whole temperature parameter are compensated inside the module. It can also maintain high measurement accuracy for a long time. At the same time, the module adopts the overall vibration reduction, sealing design and other measures to ensure that the product can still accurately measure the angular and linear motion parameters of the carrier in the harsh environment, so as to provide users with a low-cost and high reliability solution. 3) High precision components manufacturing and system calibration compensation technology. We have accumulated a series of key technologies in the research and development process of this project to ensure the high performance of the products. At the same time, the system adopts high-speed sampling, static error compensation (zero position, scale factor, installation error and other fine compensation in the whole temperature zone), dynamic error compensation and other technologies, to ensure that the product during the use process to achieve the best performance. 4) High quality and reliability Through the comprehensive control of upstream and downstream processes and technologies, the company can effectively improve product quality and reduce system costs. At the same time, the company implements ISO9001 and GJB quality systems adopt strict processes to ensure the reliability and consistency of product performance. Especially in the desert and other outdoor areas, the precision of traditional geomagnetic north finding schemes is not high. ER-MNS-05 Triaxial MEMS North Seeker produced by our company has the characteristics of being free from environmental interference, high precision measurement, small size and low power consumption, which can well meet the above requirements. 3. Applications North finder Navigation and control Attitude reference system Guidance Vehicle and ship attitude measurement Integrated inertial/satellite navigation system Drilling and production systems Mobile mapping system On-the-move

ER-MNS-04 (0.5°/1°): 1. Single axis MEMS gyroscope; 2. Economical north seeker; 3. Fast seeking true north. ER-MNS-04 Economical MEMS North Seeker Introduction More information please click here ER-MNS-04 Economical MEMS North Seeker (0.5°/1°) use high precision MEMS gyro to find true north, built-in IMU is used to measure pitch angle. It has features of miniature, low power consumption, long usage life, high reliability. The products are widely used in coal mining, oil drilling, tunnel construction and geodesy, also can be used for static initial alignment and direction control of radar, antenna, vehicle and other objects. Applications North seeker Navigation and control Attitude reference system Guidance Vehicle and ship attitude measurement Integrated inertial/satellite navigation system Drilling and production system Mobile mapping system On-the-move

ER-FNS-01 High Performance Dynamic FOG North Seeker (0.02°-0.5°) Introduction ER-FNS-0 , 1 High Performance Dynamic FOG North Seeker (0.02°-0.5°) consists of high precision, rugged solid FOG, quartz accelerometer, data acquisition and processing unit. It can provide its true north position information when the carrier moves. At the same time, the information of motion attitude, velocity and position of the carrier can also be displayed. This dynamic north seeker is suitable for static and dynamic initial alignment of missile launch, weapon aiming, direction control of radar, antenna and land surveying and mapping. https://www.ericcointernational.co , m/north-finders/fiber-optic-gyro-north- finder/ , dynamic-fiber-optic-gyro-north-finder.html , Applications North seeker Navigation and control Attitude reference system Guidance Vehicle and ship attitude measurement Integrated inertial/satellite navigation system Drilling and production system Mobile mapping system On-the-move

Technical Features 1. Precise P.I.D. temperature control High-precision timer Alarm capability Consistent fluid medium heating Inclusion of a standard square metal clamp and a free shrink holder Equipped with an oil bath cover Standard: ASTM D2732 Main Parameters Sample Size ≤160 mm x 160 mm Temperature Range Ambient ~ 200°C Accuracy ±0.3°C Dimension 37*44*28 LWH cm Power Supply 220V 50Hz Technical Features 1. Precise P.I.D. temperature control High-precision timer Alarm capability Consistent fluid medium heating Inclusion of a standard square metal clamp and a free shrink holder Equipped with an oil bath cover Standard: ASTM D2732 Main Parameters Sample Size ≤160 mm x 160 mm Temperature Range Ambient ~ 200°C Accuracy ±0.3°C Dimension 37*44*28 LWH cm Power Supply 220V 50Hz

Minimum Order: 1 bags

With the development of science and technology, veterinary ultrasound machines have become an important tool for animal medical treatment, and are widely used in the diagnosis and treatment of various animal diseases. Among them, veterinary ultrasound machines have played an important role in the pregnancy scanning of cattle and sheep. 1. The basic principle of veterinary ultrasound machine Veterinary ultrasound machines use the physical properties of ultrasound to work. When the ultrasonic waves meet the tissues in the animal body, different signals will be returned according to the different tissues' ability to reflect the ultrasonic waves. After these signals are received by the receiver, they are converted into visual images, showing the structure and organ status in the animal. 2. Application of Veterinary Ultrasound Machine in Pregnancy Scanning of Cattle and Sheep Early Pregnancy Diagnosis: Veterinary ultrasound machines enable quick and accurate diagnosis of early pregnancy cows and ewes, which helps ensure animal health and productivity. In the early stages of pregnancy, the development of the fetus can be clearly seen through the scan, which is of great significance in preventing unplanned miscarriage or premature birth. Fetal Gender Determination: Veterinary ultrasound machines can also be used to determine the sex of a fetus. This is a very useful tool for farms that need to control the reproductive sex ratio. Monitoring fetal health: Veterinary ultrasound machines can detect abnormalities in the fetus, such as fetal death or malformation. This helps to take timely measures to protect the health of the mother animal. Determination of the expected delivery date: Through the veterinary ultrasound machine, the expected delivery date can be accurately determined, which is very important for the farm, because the delivery can be prepared in advance. 3. Precautions for using veterinary ultrasound machine Operators need to undergo professional training and be familiar with the use of the machine and operating skills. During use, make sure that the animals are in a quiet state so as not to affect the inspection results. Pay attention to protect the safety of animals and operators Boxianglai veterinary B-ultrasound equipment is mainly used for pregnancy and disease detection of pigs, cattle, sheep, camels, alpacas and small animals. The company has high-quality scientific research and management personnel and excellent equipment.

Minimum Order: 1 bags

Test Probe Pogo Pin PL50 Series for PCBA Inspection In-circuit test probes are mainly used for testing electrical performance of in- circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits. We will introduce in-circuit test probe PL50 series here. Its test center is 50 mil, namely 1.27 mm. The diameter is 0.68 mm and the total length is 27.53 mm. Various tip styles, for example, H, S, T, E, C, U, G, etc., are available for test probes. There are roughly four types of receptacles, namely CR, VCR, SC, VSC, CRW and VCRW, to fit each test probe. For details, please check below parameters. Technical Specifications Recommended Minimum Center: 1.27 mm (50 mil) Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms Mounting Hole Size: Diameter 0.95 mm Full Stroke: 3.7 mm Rated Stroke: 2.54 mm Spring Force: 28/56/85 gf (1/2/3 oz) Materials Receptacle: Brass, Gold Plated Contact Barrel: Brass, Gold Plated Spring: Music Wire, Gold Plated Plunger: BeCu/SK4, Nickel Plated or Gold Plated For more information, please check below catalog. Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

PCBA Test Probe Pogo Pin PC75 Series Applied to ICT In-circuit test probes are mainly used for testing electrical performance of in- circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits. We will introduce in-circuit test probe PC75 series here. Its test center is 75 mil. The diameter is 1.91 mm and the total length is 33.1 mm. Various tip styles, for example, A, B, U, H, K, L, BK, etc., are available for test probes. There are roughly three types of receptacles, namely CR, SC and WW to fit each test probe. For details, please check below parameters. Technical Specifications Recommended Minimum Center: 1.91 mm (75 mil) Current Rating: 3 Amps, continuous Contact Resistance: 40 milliohms Mounting Hole Size: Diameter 1.35 mm Full Stroke: 6.4 mm Rated Stroke: 4.3 mm Spring Force: 150 gf (5.4 oz)/200 gf (7.2 oz)/280 (10 oz)/330 gf (12 oz) Materials Receptacle: Brass, Gold Plated Contact Barrel: Phosphor Bronze, Gold Plated Spring: Music Wire, Gold Plated Plunger: SK4, Nickel Plated or Gold Plated For more information, please check below catalog. Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

In-circuit Test Probe Pogo Pin PE50 for PCBA Inspection In-circuit test probes are mainly used for testing electrical performance of in- circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits. We will introduce in-circuit test probe PE50 series here. Its test center is 50 mil. The diameter is 1.27 mm and the total length is 43.2 mm. Various tip styles, for example, A, B, U, H, K, L, BK, etc., are available for test probes. There are roughly four types of receptacles, namely CR, SC, CRW and SW to fit each test probe. For details, please check below parameters. Technical Specifications Recommended Minimum Center: 1.27 mm (50 mil) Current Rating: 3 Amps, continuous Contact Resistance: 60 milliohms Mounting Hole Size: Diameter 1 mm Full Stroke: 6.4 mm Rated Stroke: 4.3 mm Spring Force: 150 gf (5.5 oz) Materials Receptacle: Phosphor Bronze, Gold Plated Contact Barrel: Phosphor Bronze, Gold Plated Spring: Music Wire, Gold Plated Plunger: BeCu, Nickel Plated or Gold Plated For more information, please check below catalog. Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

In-circuit Test Probe Pogo Pin PQ100 Series for PCBA Inspection In-circuit test probes are mainly used for testing electrical performance of in- circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits. We will introduce in-circuit test probe PQ100 series here. Its test center is 100 mil. The diameter is 1.36 mm and the total length is 33.25 mm. Various tip styles, for example, H, K, L, BK, etc., are available for test probes. There are four types of receptacles, namely CR, SC, SW and WW, to fit each test probe. For details, please check below parameters. Technical Specifications Recommended Minimum Center: 2.54 mm (100 mil) Current Rating: 3 Amps, continuous Contact Resistance: 30 milliohms Mounting Hole Size: Diameter 1.75 mm Full Stroke: 6.35 mm Rated Stroke: 4.3 mm Spring Force: 100/120/156/203/255/284/312 gf (3.5/4/5.5/7.2/9/10/11 oz) Materials Receptacle: Brass, Gold Plated Contact Barrel: Brass, Gold Plated Spring: Music Wire, Gold Plated Plunger: BeCu, Nickel Plated or Gold Plated For more information, please check below catalog. Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100