Networking Equipment

MW2244G Modbus Gateway support 4-port RS485 + 4-port 10/100Base-T(X) + 2- port 100M FX with Modbus TCP and Modbus RTU protocol, adopts high-strength IP40 protective shell, industrial-grade EMC design, supports Auto- Negotiation adaptive technology, provides LED status indication, and supports voltage 12~48V DC power input to increase the reliability of the communication network. MW2244G can easily and conveniently centralize the management of scattered serial devices and hosts through the network. The communication rate supports 110~115200bps optional. Built-in Modbus TCP and Modbus RTU protocol, the user can easily realize Modbus Ethernet device and Modbus serial device connection. Based on industrial installation requirements, 35mm rail installation mode is provided. This product adopts the industry excellent network solution, and the operating temperature range is -40~85℃, which can meet the requirements of various industrial scenes and provide convenient serial communication solutions. Support 4-port RS485 + 4-port 10/100Base-T(X) + 2-port 100M FX ; Support 4-port serial isolation function, isolated voltage 500V AC; Support IEEE802.3/802.3u standard, store and forward Exchange Mode; Support TCP server, TCP client, UDP, Modbus TCP(RTU) transmission mode, 110~115200bps line speed non-blocking communication; Comply with TCP, IP, UDP, Modbus TCP, Modbus RTU, ARP, ICMP, HTTP, TFTP; Supports Modbus Slave mode, support up to 4 TCP master connections; Support Web management; Support serial port settings, can connect two serial devices via Ethernet; Supports gateway, cross-routing communication; Low-power consumption design; Metal housing with IP40 and high level EMC protection; Support wide voltage 12-48V DC power input; Support DIN-Rail Mounting or Wall Mounting installation; Working temperature range:-40~85°C; Warranty:5years

Minimum Order: 1 bags

MW1011 Din-Rail industrial serial server support 1-channel RS232/RS-485/422 + 1-port 10/100Base-T(X), adopts high-strength IP40 protective shell, industrial-grade EMC design, supports Auto-Negotiation adaptive technology, provides LED status indication, and supports voltage 12~48V DC power input to increase the reliability of the communication network. MW1011 can easily and conveniently centralize the management of scattered serial devices and hosts through the network. The communication rate supports 110~115200bps optional. Built-in Modbus TCP and Modbus RTU protocols, users can easily connect Modbus Ethernet devices and Modbus serial devices. Based on industrial installation requirements, 35mm rail installation mode is provided. This product adopts the industry excellent network solution, and the operating temperature range is -40~85℃, which can meet the requirements of various industrial scenes and provide convenient serial communication solutions. Support 1-port 10/100BASE-T(X) + 1-port RS232/RS-485/422; Support IEEE802.3/802.3u standard, store and forward Exchange Mode; Support TCP server, TCP client, UDP three serial transmission mode, 110~115200bps line speed non-blocking communication; Support TCP, UDP, ModbusTCP, ModbusRTU, ARP, ICMP, HTTP, TFTP; Support Modbus TCP(RTU_MASTER); Support Web management; Support serial port settings, can connect two serial devices via Ethernet; Supports gateway, cross-routing communication; Low-power consumption design; Metal housing with IP40 and high level EMC protection; Support redundant wide voltage 12-48V DC power input; Support DIN-Rail Mounting or Wall Mounting installation; Working temperature range:-40~85°C; Warranty:5years

Minimum Order: 1 bags

IES308-2F-2GS-404 is a 8-Port Serial Port Combo Managed Industrial Ethernet Switch which support 4-port 10/100M Base-T(X) +2-port Gigabit SFP + 1-port RS232+ 3-port RS485, is specially designed to meet the needs of flexible industrial applications, and provides a cost-effective Ethernet solution. Provides powerful management function that can be managed through a web browser, command line (CLI), and SNMP. Support a wide range of redundant power input (12-48V DC) to increase the reliability of the communication network. IES308-2F-2GS-404 can transmit the serial port data through Ethernet network, and the optical and electric combination can flexibly carry out according to the requirements of the service port. Base on the needs of industrial installation, DIN35 rail or wall mounting two installation modes provided. The product adopt with fan free, low power consumption, industrial grade design, - 40 ~ 85°C working temperature range, which can meet the requirements of various industrial sites and provide convenient Ethernet communication solutions. Support 4-port 10/100M Base-T(X) +2-port Gigabit SFP + 1-port RS232+ 3-port RS485; Support broadcast storm suppression function; Support port mirroring for online debugging and monitoring of network data status; Support QoS, IGMP, 802.1Q VLAN management function; Support unicast / multicast MAC address management; Support static IGMP multicast filtering; Support Web, CLI and SNMP three management modes; Support RSTP and MW-Ring, for Ethernet redundancy, ring network self- healing time < 20ms; Support three working modes of TCP server, TCP client and UDP; Adopt with high strength IP40 housing and industrial EMC design; Support redundant wide voltage 12-48V DC power input, full load power consumption less than 11W; Support DIN-Rail Mounting or Wall Mounting installation; Working temperature range:-40~85°C; Warranty:5years

Minimum Order: 1 bags

UPCOM IES3010-2GS is a rugged industrial grade, Din-Rail, layer2, Managed Ethernet switch which supports 8-port 10/100M RJ45 +2 Gigabit SFP ports. It provided some kinds of advanced network managed function, such as: MW-Ring redundancy technology (failure recovery time<20ms), VLAN, multicast, Quality of Service, Speed control, port mirroring, fault alarm and firmware remote update, also support CLI, WEB, Telnet, SNMP management, provide a user-friendly web console interface for easy configuration. IES3010-2GS adopts standard Industrial design, IP40 protection, aluminum alloy shell, support Din-rail or wall installation, fanless design, EMC level 4 protection, dual power DC12-48V or single AC/DC220V optional, can satisfied the requirement of various industrial applications such as Industrial automation, smart grid, rail transportation industry, safely city, and new energy applications. Support 8-port 10/100M RJ45 +2 Gigabit SFP ports; Support static multicast filtering, IGMP Snooping; Support MW-Ring redundancy technique (failure recovery time <20ms); Support STP/RSTP/MSTP; Support managed function such as VLAN, QoS, Trunking, and port mirroring; Support CLI, WEB, Telnet, SNMP management; Support RMON and private MIB table; Support firmware upgrade online; Support relay alarm output; Support indicator status display; Support IP40 protection, aluminum alloy shell, fanless design; Support Broadcast storm suppression; Support dual DC12-48V or single AC/DC 220V power supply; Power supply input support anti-reverse protection and non-polarity; Support over Voltage, over current, EMC protection; Support -40~75°C wide operating temperature range; DIN-Rail or wall Installation; Warranty:5years https://www.upcomnet.co , m/ , products/industrial-ethernet-switches-din-rail- managed-layer2-gigabit-552.html

Minimum Order: 1 bags

UPCOM IES405-F is a rugged industrial grade, Din-Rail, layer2, Unmanaged Ethernet switch that supports 4-port 10/100M Base-T(X) +1-port 100Base-FX. Plug and play, easy to install, no configuration is required, can be operated at wide temperatures range from -40 to 75°C. IES405-F adopts standard Industrial design, IP40 protection, aluminum alloy shell, support Din-rail or wall installation, fanless design, support EMC level 4 protection, Single power DC12-48V or single AC/DC220V optional, can meet the requirement of various Industrial automation, Data Center Network, Intelligent Transportation System, Electric Power Industry, and new energy applications. Support 4-port 10/100M Base-T(X) + 1-port 100Base-FX; Plug-and-play, no configuration is required; Support indicator status display; Support IP40 protection, aluminum alloy shell, fanless design; Support Broadcast storm suppression; Support Single DC12-48V or single AC/DC 220V power supply; Power supply input support anti-reverse protection and non-polarity; Support over Voltage, over current, EMC protection; Support -40~75°C wide operating temperature range; DIN-Rail or wall Installation; Warranty:5years

Minimum Order: 1 bags

Pre-terminated multi-fiber cables consist of optical fiber cable terminated with various types of connectors, such as the ST, FC, SC, LC, MU, MTRJ, E2000 Connector types. Our polishing craft and expertise ensure excellent optical performance. As a professional pre-terminated cable manufacturer, T&S produces multifiber cable assemblies that are composed of top-quality ceramic ferrules and fiber connector housings. All of our multifiber cables are ensured with a stable performance at a high-quality level. The Applications of Multifiber Cable We provide Pre-terminated multi-fiber cables (indoor/outdoor/breakout cable) for both single mode and multi-mode applications (SM and MM). This finds optical connectors and fiber/cable from the leading manufacturers of their application. FAQs of Pre-terminated Multifiber Cable What Is The Default Length Of Both Fanout Part (breakout Leg) And The Entire Length? Can It Be Customized? No default length is defined and you can customize the multifiber cable for sure. In most cases, the breakout leg is 0.5m according to our record. The longest breakout leg could be 3.0m or longer and it depends. Will A 50m Pre-terminated Cable Be Shipped With Being Pack On A Spool?  Basically, a piece of cable will be packaged with a spool when its length reaches up to 100m for ordinary structures. There're wooden spools, plastic spools and paper spools for you to choose from. Please contact T&S sales team on your specific cases for more packing details of multifiber cables. What's The Largest Fiber Count Of Pre-terminated Multi-fiber Cable T&s Can Offer? So far, the largest fiber count of pre-terminated multi-fiber we are offering is 576-fiber. In most cases, fiber count is not the key element for pre-termination if a cable with even more fibers is attainable. How Much Does It Cost To Terminate Fiber Optic Cable? Since the customization of our multifiber cable is available, the price of terminating a fiber optic cable can vary greatly from one order to another. For more accurate information, please feel free to contact our sales team. T&S Communications is a professional fiber optic products supplier. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.

LC or SC loopback or other customized, SM and MM fiber type for option, optical information routine exchange or test and equipment required, LC loopback is RJ-45 style interface. All loopback is compliant to Telcordia, IEC and EIA/TIA standard. Features of LC/SC Loopback Duplex connector or multi-fiber connector MPO or MTP connector(for multi-fiber connector) Standard loss or low loss(for multi-fiber connector) PC or APC polish Cable form or housing form Available in G.652, G.657, OM1, OM2, OM3, OM4 fiber Option for LSZH, OFNR or OFNP cable jacket Option for A, B or C polarity or Customized(for multi-fiber connector) Customized length available(multi-fiber connector≥15cm; duplex connector≥7.5cm) 100% factory terminated and tested Applications of LC/SC Loopback System loop test Optical loop test Aging and testing of the system Standards Compliance of LC/SC Loopback TIA/EIA-568.3-D ISO/IEC 11801 IEC-61754-7 IEC61754-20 IEC61754-4 EIA/TIA-604-5 GR-1435-CO , RE GR-326-CORE NFPA 262 or IEC 60332 Compliant to Directive 2002/95/EC (RoHS) REACH SvHC EN 50575 Specifications of LC/SC Loopback General Specification Construction Description Fiber Count 2fibers for duplex type; 2-24fibers for multi-fiber connector Fiber Mode Single mode: OS2/G657 9/125um Multimode: OM1 62.5/125 um OM2 OM3OM4 50/125um; Fiber Brand Corning SMF-28® Ultra optical fiber Corning ClearCurve® multimode fiber Cable Jacket Ratings Low Smoke Zero Halogen (LSZH) Riser (OFNR) Plenum (OFNP) Cable Jacket Color OS2/G657: Yellow OM1&OM2: Orange OM3: Aqua; OM4: Aqua/Magenta or Customized Polarity Type A, Type B, Type C (TIA-568.3-D) or Customized Connector Type SC LC MPO MTP Connector Color (SC LC) SM(APC) SM(PC) OM3 OM4 or customized Green Blue Aqua Magenta/Aqua Connector Color (MPO MTP) SM(APC) SM(PC) OM3 OM4 or customized Low Loss Yellow Yellow Aqua Magenta/Aqua Standard Green Blue Aqua Magenta/Aqua Loopback housing color black Operating Temperature -20°C to + 70°C Storage Temperature -40°C to + 85°C Technical Specification Optical Properties Singlemode Multimode Insertion Loss (dB) APC ≤ 0.30 (Typical:≤ 0.15 ) UPC ≤ 0.20 (Typical:≤ 0.1 ) APC ≤ 0.30 (Typical:≤ 0.10 ) PC ≤ 0.20 (Typical:≤ 0.1 ) Insertion Loss (dB) Low loss≤ 0.35 (Typical:≤ 0.25 ) Low loss≤ 0.35 (Typical:≤ 0.2 ) Standard Loss≤0.75 (Typical:≤ 0.4 ) Standard Loss≤ 0.6 (Typical:≤ 0.35 ) Return Loss (dB) PC≥50; APC≥60 PC≥20; APC≥40 Wavelength (nm) Singlemode: 1310/1550, Multimode: 850/1300 Fiber Attenuation (dB/km) Singlemode: ≤0.35 at 1310nm, ≤0.2 at 1550nm Multimode: ≤2.3 at 850nm, ≤0.6 at 1300nm Transmission Distance OM4: 150m at 40/100G, 550m at 10G OM3: 100m at 40/100G, 300m at 10G Housing and Pull-tab of LC/SC Loopback The loopback is both ends of fiber in a duplex connector or a multi-fiber connector, then the optical signal in the same connector, don't change signals or repeated back to its itself. It can provide an effective solution, test the emission ability of the network equipment and receive sensitivity, especially in 40/100G network communication through back signal positioning can be all kinds of potential phenomenon, so as to achieve optical fiber network in pairs on a single element or interface and effective test and evaluation of the Internet. T&S Communications is a professional fiber optic products supplier. We provide WDMs, Fiber Optic Component and so on. Want to know about ts communication? Please contact us.

The MT ferrule is a multi-fiber, plastic ferrule with a square end-face of 6.4x2.5 mm and fiber pitch 0.25mm, widely applied in MPO connectors and AOC cables. 12 and 24-fiber MT ferrules are the most commonly used types. Features of MT Ferrule MT ferrules manufactured by high precision mold technology meet international standards such as IEC 61754-3-31, GR-135 etc. Specification of MT Ferrule Ferrule Type Fiber Hole Diameter (mm) Guide Pin Hole Diameter (mm) Insertion Loss（dB） 12-Fiber MM Standard 0.1255+0.002/-0 0.7±0.001 Typical=0.25 max≤0.5 MM Low Loss 0.1255+0.002/-0 0.7+0/-0.001 Typical=0.12 max≤0.35 SM Standard 0.1250+0.001/-0 0.7+0/-0.001 Typical=0.25 max≤0.7 SM Low Loss 0.1250+0.0007/-0 0.6990+0.0006/-0 Typical=0.12 max≤0.35 24-Fiber MM Standard 0.1255+0.002/-0 0.7±0.001 Typical=0.25 max≤0.5 MM Low Loss 0.1255+0.002/-0 0.7+0/-0.001 Typical=0.12 max≤0.35 SM Standard 0.1250+0.001/-0 0.7+0/-0.001 Typical=0.25 max≤0.7 SM Low Loss 0.1250+0.0007/-0 0.6990+0.0006/-0 Typical=0.12 max≤0.35 T&S Communications is one of professional fiber optic accessories suppliers. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.

Like MTP/MPO cable, MTP/MPO Shuffle cable is also used for connecting MTP modules together as a permanent link, and it also be used with plug-and-play modules or MTP/MPO connector panels to achieve multi-level connection of the extension of the pre-terminated trunk cable by MTP/MPO panel. Normally, the shuffle cables are used to interconnect cassettes, panels, or ruggedized MTP/MPO fanouts, spanning MDA, HDA, and EDA zones. The difference is that its optical fiber routing is formulated according to the requirements of the optical connection at the construction site, which can realize special optical fiber routing different from the conventional polarity, reducing network installation or reconfiguration time and cost. Features of MTP/MPO Shuffle Cable Low loss performance Up to 288 fibers – ideal for high-density applications Available in OS1, OS2, G.657A2, OM3, OM4 Fiber Grades – OM1 and OM2 available upon request Option for LSZH, OFNP or OFNR cable jacket 100% factory terminated and tested Pulling eyes are provided as an option to protect the fiber ends during installation Save installation and reconfiguration time Applications of MTP/MPO Shuffle Cable Data Centers 40/100G applications Storage area network- fiber channel Parallel optics InfiniBand The internal connector application in fiber equipment Standards Compliance of MTP/MPO Shuffle Cable TIA/EIA-568.3-D and ISO/IEC 11801 IEC-61754-7 & EIA/TIA-604-5&GR-1435-CORE NFPA 262 or IEC 60332 Compliant to Directive 2002/95/EC (RoHS) and REACH SvHC EN 50575 InfiniBand Compliant Specifications of MTP/MPO Shuffle Cable General Specification Construction Description Fiber Count 12-288 Fibers Fiber Mode Single mode: OS2/G657 9/125um Multimode: OM4 50/125um, OM3 50/125um Fiber Brand SMF-28® Ultra optical fiber Corning ClearCurve® multimode fiber Cable Jacket Ratings Riser (OFNR) Plenum (OFNP) Low Smoke Zero Halogen (LSZH) Cable Jacket Color OS2/G657: Yellow OM3: Aqua; OM4: Aqua/Magenta or Customized Polarity Customized Connector Ferrule 12F/16F/ 24F/32F/48F Connector Ferrule Brand US Conec, HANKUSAN, Nissin Connector Type MTP Female, Male; MPO Female, Male Connector Brand US Conec MTP, Senko MPO, Nissin MPO, Sanwa MPO, FURUKAWA MPO Connector Color Ferrule SM(APC) SM(PC) OM3 OM4 or Customized Low loss Yellow Yellow Aqua Magenta Standard Green Blue Aqua Magenta Connector Boot Color Green/Black/ or Customized Pulling eye Customized Operating Temperature -20°C to +70°C Storage Temperature -40°C to +85°C Technical Specification Optical Properties Single mode Multimode Insertion Loss (dB) Low loss Standard Low loss Standard ≤0.35(Typical:≤0.25) ≤0.75(Typical:≤0.4) ≤0.35(Typical:≤0.2) ≤0.5(Typical:≤0.35) Return Loss (dB) PC≥50; APC≥60 PC≥20; APC≥40 Wavelength (nm) 1310/1550 850/1300 Durability ≤0.3 (dB)typical change, 50 matings Fiber Attenuation (dB/km) Single Mode: ≤0.35 at 1310nm, ≤0.2 at 1550nm Multimode: ≤2.3 at 850nm, ≤0.6 at 1300nm Typical Cable Structure of MTP/MPO Shuffle Cable Fiber Count OD(mm) Nominal Weight(kg/km) Max.Tension(N) Max.Crushing Resistane(N/100) Short term long Term Short term long Term 12 3.0±0.1 8.1 150 80 500 150 24 3.0±0.1 8.5 160 80 500 150 24 9.0±0.5 72 500 180 1000 300 36 9.0±0.5 78 500 180 1000 300 48 9.0±0.5 79 600 200 1000 300 60~72 11.2±0.5 126 1000 300 1000 300 96 13.5±0.5 178 1000 300 1000 300 144 17.5±0.5 285 1000 300 1000 300 Note: The true weight of optical cable may have some tolerance with the above-stated value. T&S Communications is one of professional fiber optic accessories suppliers. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.

T & S MTP / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-designed by engineers at T&S, our MTP/MPO loopback adapter can transmit the optical network signal from the transmitter to the receiver, thereby forming the optical signal receiving and transmitting loop. MTP / MPO fiber loop provides a fast and efficient way to test the transmission capacity and receiving sensitivity of optical network equipment. T & S MTP / MPO fiber loop has 8F, 12F, 16F, 24F, 32F channels with low loss and conventional loss, single-mode and multi-mode options. Our MTP/MPO loopback adapter is now widely used for optical network equipment self-test, network diagnosis, and test, etc. Specifications of MTP/MPO Loopback General Specification Construction Description Fiber Count 2fibers for duplex type; 2-24fibers for multi-fiber connector Fiber Mode Single mode: OS2/G657 9/125um Multimode: OM1 62.5/125 um OM2 OM3OM4 50/125um; Fiber Brand Corning SMF-28® Ultra optical fiber Corning ClearCurve® multimode fiber Cable Jacket Ratings Low Smoke Zero Halogen (LSZH) Riser (OFNR) Plenum (OFNP) Cable Jacket Color OS2/G657: Yellow OM1&OM2: Orange OM3: Aqua; OM4: Aqua/Magenta or Customized Polarity Type A, Type B, Type C (TIA-568.3-D) or Customized Connector Type SC LC MPO MTP Connector Color (SC LC) SM(APC) SM(PC) OM3 OM4 or customized Green Blue Aqua Magenta/Aqua Connector Color (MPO MTP) SM(APC) SM(PC) OM3 OM4 or customized Low Loss Yellow Yellow Aqua Magenta/Aqua Standard Green Blue Aqua Magenta/Aqua Loopback housing color black Operating Temperature -20°C to + 70°C Storage Temperature -40°C to + 85°C Technical Specification Optical Properties Singlemode Multimode Insertion Loss (dB) APC ≤ 0.30 (Typical:≤ 0.15 ) UPC ≤ 0.20 (Typical:≤ 0.1 ) APC ≤ 0.30 (Typical:≤ 0.10 ) PC ≤ 0.20 (Typical:≤ 0.1 ) Insertion Loss (dB) Low loss≤ 0.35 (Typical:≤ 0.25 ) Low loss≤ 0.35 (Typical:≤ 0.2 ) Standard Loss≤0.75 (Typical:≤ 0.4 ) Standard Loss≤ 0.6 (Typical:≤ 0.35 ) Return Loss (dB) PC≥50; APC≥60 PC≥20; APC≥40 Wavelength (nm) Singlemode: 1310/1550, Multimode: 850/1300 Fiber Attenuation (dB/km) Singlemode: ≤0.35 at 1310nm, ≤0.2 at 1550nm Multimode: ≤2.3 at 850nm, ≤0.6 at 1300nm Transmission Distance OM4: 150m at 40/100G, 550m at 10G OM3: 100m at 40/100G, 300m at 10G MTP Loopback with Housing and Pull-tab  The MTP loopback occupies both ends of fiber in a duplex connector or a multi-fiber connector. This MTP lookback with housing and pull-tab can provide an effective solution so as to test the emission ability of the network equipment and receive sensitivity. Especially in 40/100G network communication, our MTP loopback devices can achieve optical fiber network in pairs on a single element or interface and conduct effective tests and evaluation of the Internet through back signal positioning. T&S Communications is a professional fiber optic products supplier. We provide WDMs, Fiber Optic Component and so on. Want to know about ts communication? Please contact us.

T & S MTP Cable Assemblies / MPO cable assembly meets the requirements of IEC61754, IEC61755, TIA568, GR1435 and other standards, and adopts a push- pull locking structure with male and female heads to ensure butt tightness and low loss. Single head loss of SM product: conventional product IL ≤ 0.75db, RL ≥ 60dB; elite product IL ≤ 0.35db, RL ≥ 60dB. Single head loss of MM product: conventional product IL ≤ 0.60db, RL ≥ 20dB; elite product IL ≤ 0.35db, RL ≥ 20dB. The optical fiber channel is used for termination and supports high bandwidth applications. It is specially designed to save cable management time and high-density fiber distribution area. The outer diameter of the optical cable can match the pre-termination of Ø 2.0 ~ 5.5mm, and the spring elasticity of 9.8N and 20n can be matched; mm supports 10g, 40g, 100g and 400g applications. FAQs of MTP/MPO Cable Assembly What Is The Minimum Length For A Mtp/mpo Trunk Cable?  For trunk cable, minimum length is 0.3 in general. For customized requirements, please contact T&S sales team for details. MTP Connector and MPO Connector MTP connector is one type of MPO connector with even greater optical and mechanical performance when compared to ordinary MPO connectors. MTP is the brand of its better designed MPO connector owned by USConec. What's The Difference Between Ofnp And Lszh Cable Jacket? OFNP (plenum) jacket is of the highest fire retardant rate. It gives off little smoke when on fire, LSZH (Low Smoke Zero Halogen) cable jacket is composed of thermoset compounds that emit limited smoke and no halogens when exposed to flame. At T&S, there are various jackets of different colors and materials for you to choose from. T&S Communications is a professional fiber optic products supplier. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.

Fiber optical master cord and bus cord are produced by standard ferrule with high-standard connector kits via special production process. According to different application requirements, the master cord can be generally divided into two grades: bus cord and master card. The product has characteristics like low loss, good consistency and good interchangeability, which can minimize the impact of the test system on the test results. It is widely used in product testing, instrument calibrations. Application of Master Cord Produced by T&S, a professional supplier of fiber optic connectivity products, our master cords can be applied to the following occasions: measure the connection/insertion loss by physical contact measure the direction of eccentricity measure return loss by physical contact Manufactured under strict quality control, our fiber optical master cords are of consistently high quality. T&S Communications is one of professional fiber optic accessories suppliers. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.

As the " Optical Fiber Sensing Engineering Technology R&D Center of Guangdong Province " , T&S takes the frontier application and development of fiber grating sensing technology as the main research direction and introduces the most practical and creative products to the market. FBG Sensor Being a fiber optic sensor, a FBG sensor has all the advantages usually attributed to these devices, such as low loss relative to the fiber length, immunity to electromagnetic and radio frequency interference, small size and weight, intrinsically safe operation in environments characterized by hazardous materials, high sensitivity and long-term reliability. In addition, fiber Bragg grating technology reveals an inherent serial multiplexing capacity and an ability to provide absolute measurements without the need for referencing. This makes it a natural alternative to conventional electrical sensing technologies. ID Reflector FBG ID Reflector can be used in FTTX fiber trouble-shooting monitoring. The combination of the OTDR and FBG Reflector can detect and locate fiber faults in minutes, protect the investment of unused fibers, and reduce the cost of maintenance. FBG ID Reflector is one of the two solutions under U-band Reflector (The other is Thin Film based TFR, and both the two are available at T&S.). FBG Reflector has been granted China patent and US patent. According to the standard ITU-T G.982, the reflectance of any optical component between ONU and OLT should be better than -35dB, which makes FBG Fiber Reflector a perfect solution. T&S FBG Fiber reflectors are designed in different encapsulation forms to fit different applications. Customized encapsulations are also available. T&S Communications is a professional fiber bragg grating manufacturer. We provide WDMs, Fiber Optic Component and so on. Want to know about ts communication? Please contact us.

FBG Strain Sensor measures the strain by utilizing the inherent feature of strain sensitivity of FBG. The kind of FBG sensor fits to be embedded to measure the strain in a ban, bridge, tunnel, and other constructions. Features of FBG Strain Sensor High precision Resistant to electromagnetic interference Quick response High stability and reliability Effective lattice network for multi-point measurement Specifications of FBG Strain Sensor Item Unit Value Wavelength nm 1510~1590 range με 5000 Resolution με 1 precision με 5 Connector type --- FC/APC or Customize Cable type mm Φ3 Size mm Φ17×70 T&S Communications is a professional fiber optic products supplier. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.