Non-Metallic Minerals & Products

Engineered to provide exceptional durability and high thermal efficiency in industrial cooling applications. These FRP cooling towers are crafted from pultruded fiberglass, a material known for its superior strength and resistance to harsh environments, making pultruded frp cooling tower a customizable and eco-friendly choice for various industries.   Pultruded frp cooling tower features • Exceptional Durability Pultruded cooling towers are built to withstand the test of time, with high resistance to corrosion, chemicals, UV radiation, and environmental factors, ensuring a longer operational lifespan and minimal maintenance. • Corrosion Resistance Unlike traditional cooling solutions prone to rust and wear, pultruded FRP towers are unaffected by corrosive elements, making them perfect for industries such as chemical processing and power generation. • Consistent Performance The inherent qualities of pultruded FRP ensure consistent cooling performance, crucial for maintaining uninterrupted industrial processes. • Wide Application Range Our pultruded frp cooling towers for sale are versatile, serving a broad spectrum of industries including manufacturing, power plants, chemical processing, steel, and sugar industries, among others.   Molded Cooling Tower Working principle After the dry (low enthalpy value) air is pumped by the fan, it enters the cooling tower from the inlet air network; The high temperature water molecules with high partial pressure of saturated steam flow to the air with low pressure, and the wet and hot water (high enthalpy value) is poured into the tower by the self-seeded water system. When water droplets and air contact, on the one hand due to the direct heat transfer of air and not, on the other hand due to the pressure difference between the surface of the water steam and the air, under the action of pressure to produce evaporation phenomenon, to the evaporation of latent heat, the heat in the water to take away the evaporation of heat transfer, so as to achieve the purpose of cooling tower.   Used in air conditioning cooling system, refrigeration series, injection molding, leather, foaming, power generation, steam turbine, aluminum processing equipment Design meteorological conditions of FRP molded cooling tower Atmospheric pressure: P =99.4×103 kPa Dry bulb temperature: θ =31.5℃ Wet bulb temperature: τ =28℃ (27℃ for square and ordinary type)   Tengxiao Cooling tower design parameters 1. Standard type: incoming tower water temperature 37℃, outgoing tower water temperature 32℃ 2. Medium temperature type: Entering the tower water temperature 43℃, out of the tower water temperature 33℃ 3. High temperature type: entering the tower water temperature of 60℃, out of the tower water temperature of 35℃ 4. Common type: the water temperature into the tower is 37℃, the water temperature out of the tower is 32℃ 5.Large tower: the water temperature into the tower is 42℃, the water temperature out of the tower is 32℃ in industry, a kind of equipment to cool hot water. Water is transported to the tower to make heat exchange between water and air, or heat and mass exchange, in order to achieve the purpose of reducing the water temperature.   Pultruded frp cooling tower applications The waste heat generated in industrial production or refrigeration process is generally guided away by cooling water. The role of FRP molded cooling tower is to carry out heat exchange between the cooling water with waste heat in the tower and the air, so that the waste heat is transmitted to the air and dispersed into the atmosphere. For example, in a thermal power plant, the boiler heats water into high temperature and high pressure steam, pushes the turbine to do work to make the generator generate electricity, and the waste steam after the steam turbine does work is discharged into the condenser, and the cooling water is exchanged to condense into water, and then the water is pumped back to the boiler for recycling. In this process, the waste heat of the lack of steam is transferred to the cooling water, which increases the temperature of the water, and the cooling water with the waste heat is transferred to the air in the cooling tower and discharged into the atmospheric environment from the wind duct.   Application range: Mainly used in air conditioning cooling system, freezing series, injection molding, leather, foaming, power generation, steam turbine, aluminum profile processing, air compressor, industrial water cooling and other fields, the most used for air conditioning cooling, freezing, plastic chemical industry.

Round countercurrent glass steel cooling tower, using the "bottle" shape design, the whole FRP cooling tower assembly is convenient, durable, light and delicate, cooling effect is good, made of high-quality glass steel, the surface gelcoat color contains light stabilizer, with anti-ultraviolet irradiation, uniform color, can maintain year-round do not fade, do not aging. Round cooling towers features: • Round cooling tower, using "bottle" shape design, minimal wind resistance. • The whole frp round cooling tower is easy to assemble, strong and durable, light and delicate, and has good cooling effect. • The circular countercurrent cooling tower body is made of high quality glass steel, and the surface gelcoat is made of imported raw materials. Its color contains light stabilizer, which is resistant to ultraviolet radiation, uniform and bright color, and can be maintained all year round without fading and aging. • The transmission parts adopt counter flow cooling tower special fan and motor. It has the characteristics of stable operation, reasonable matching, large air volume, low energy consumption and low noise. • The water distribution device is composed of fiberglass cloth water pipe, nylon water distribution device and cast copper inner core, which automatically rotates the water distribution through the water reaction force. The water distribution device has small pressure head loss, low water demand and uniform water distribution. • The packing has been tested by Shandong Thermal Engineering Institute, and has the characteristics of long life, high cooling efficiency, uniform water redistribution, small wind resistance, good hydrophilicity and high temperature resistance. • The steel component adopts advanced hot-dip galvanizing process and is coated with high-performance anticorrosive paint to ensure its service life.   Round cooling towers applications: Countercurrent cooling tower chassis can be used as a water collection tray, and equipped with manual water supply, automatic water supply, sewage, overflow and other devices, can be used as a closed cycle pool, no need to set up another pool. The silent series round cooling towers adopt a unique noise reduction technology, and the noise index is far lower than the specified value in the national standard. Circular counter flow cooling tower has good stability and strength, can withstand Richter magnitude 8 earthquake and 12 typhoon attack, round type cooling tower for sale is suitable for small and medium-sized water, multi-water dispersed arrangement of circulating cooling water system use, the arrangement is very flexible and convenient.   Company Service As a professional round cooling tower manufacturer, Tengxiao Environmental Protection Equipment is committed to providing not only high-quality products but also exceptional service. We offer: • Customized Solutions: Tailored to meet the specific requirements of your projects, ensuring optimal performance. • Quality Assurance: Rigorous quality control over every component to guarantee reliability and efficiency. • Cost-Effective Solutions: Delivering high-performance cooling towers at competitive prices, ensuring value for money. • After-Sales Support: Dedicated customer service and technical support to assist with any issues that may arise.

SELL GRAPHITE ELECTRODE Product Description: graphite electrode GRADE: RP HP UHP Product Specification / Models DIAMETER: 75-700MM LENGTH:1800MM 2100MM 2400MM 2700MM Application / Models ON STEEL MELTING INDUSTRY, WORKING AS ELECTRIC CONDUCTOR

Minimum Order: 5 dozens

The plastic geogrid mesh overcomes many technical problems such as too difficult production process, too high technical requirements for tooling molds, and strict requirements for raw material properties, and realizes the complete replacement of small hole extrusion flat mesh, achieving the effect of lightweight and greatly improving tensile strength. The structural geogrid is made of modified polymer composite material, which is formed by plasticizing extrusion, step stamping, heating and stretching. The vegetated geogrid has light weight, high strength and complete pass specifications, which can fully meet the needs of grape vine support, cucumber vine support, bean vine support and so on. VINE SUPPORT features 1.The plant support geogrid after stretching treatment, the strength is much higher than the extrusion flat products. 2.The mass strength ratio of the product is small, the weight per unit area is low. 3.Raw materials refuse to use recycled materials, without any harmful ingredients. 4.The plastic structural geogrid is strong acid and alkali resistance, can be widely used in a variety of environment. 5. Wholesale structural geogrid mesh is resistant to hydrolysis, salt spray corrosion, suitable for a variety of environment. 6.Anti-aging products, long service life, comprehensive use of low cost. Structural geogrid application Plastic structural geogrid can be used as grape vine support, cucumber vine support, bean vine support, flower vine support and so on. Visit our website

The appearance of biaxial plastic geogrid is similar to a square network structure. The material is polypropylene, which has great tensile strength in both longitudinal and transverse aspects, and pp biaxial geogrid is widely used in soft foundation reinforcement.   The uniaxial geogrid overcomes many technical problems, such as a difficult production process, high technical requirements for tooling molds, and strict requirements for raw material properties. It achieves the complete replacement of small-hole extrusion flat mesh, resulting in lightweight and a significant improvement in tensile strength. Made from modified polymer composite material, the plastic geogrid mesh is formed through processes of plasticizing extrusion, step stamping, heating, and stretching. With light weight, high strength, and complete pass specifications, the biaxial polypropylene geogrid can fully meet the needs of various breeding requirements for poultry, fish, shellfish, shrimp, and more.   Biaxial plastic geogrid features 1. The geo grid fabric after stretching treatment, the strength is much higher than the extrusion flat products. 2. The mass strength ratio of composite geogrid is small, the weight per unit area is low. 3. The size range of the hole is complete, the minimum side length of the square hole is less than 10mm. 4. Raw materials refuse to use recycled materials, without any harmful ingredients. 5. The biaxially stretched plastic grid is strong acid and alkali resistance, can be widely used in a variety of breeding environment. 6. The uniaxial plastic geogrid is resistant to hydrolysis, salt spray corrosion, suitable for a variety of aquaculture environment. 7. Anti-aging products, long service life, comprehensive use of low cost.   Biaxial plastic geogrid application 1. Suitable for all kinds of road, railway, airport roadbed enhancement pavement enhancement. 2. Suitable for large parking lot and dock freight yard and other permanent load foundation enhancement. 3. Suitable for the secondary enhancement of the soil slope after the unidirectional tensile geoglage enhancement, further enhance the soil slope, prevent soil erosion. 4. Suitable for culvert enhancement. 5. Suitable for railway, road slope protection. 6. Mine, tunnel reinforcement. 7. Stable for use as a variety of poultry breeding foot pads. 8. Used as a purse Seine for various fisheries. 9. Used as a variety of aquaculture nets. 10. Aquaculture fence for isolation and protection of various breeding areas. Inquire now

The triaxial geogrid is provided with through the bar in multiple directions, forming a vertical and horizontal rectangle and multi-direction, multi-size diamond cross-linked, nested multi-dimensional complex structure, triaxial grid is made from customized modified polypropylene (PP) raw materials, through the special structural design of the stamping die processing, after step by step multi-direction stretching, shaping, continuous plastic grille with special properties is formed.   The triaxial geogrids have high mechanical properties in many directions and are basically balanced, and are widely used in airports, docks, ports, container yards and other large-scale long-term bearing infrastructure construction.   Triaxial geogrid features 1.The mechanical properties of the geo grid ground grid in multiple directions such as 0°, 30°, 45° , 60°, 90° are basically consistent, showing the balance and consistency of the overall carrying capacity, which can play a more comprehensive and stable reinforcement role. 2.The friction coefficient of the mesh surface is large, which can make the interlocking combination formed by the tensile mesh and the foundation soil and stone materials maintain sufficient combination strength, which is not easy to damage, and plays a good reinforcement bearing role. 3.The porous staggered structure ensures the stability of the formed earth-rock interlock structure;4.The multi-direction cross-linked structure formed by the multi-bar setting ensures that the grid structure has enough stability, and it is not easy to cause structural deformation under load, which provides a strong guarantee for the stable play of the comprehensive reinforcement performance.   Shuangcheng Triaxial geogrid application 1.Suitable for airports, ports, terminals and other high standard permanent load foundation enhancement. 2.Strengthen the foundation of large area bearing sites such as container yards and large cargo yards. 3.All kinds of road, railway and other traffic engineering roadbed and pavement enhancement. 4.Mine, tunnel reinforcement engineering. 5.Engineering enhancement of various Bridges, tunnels and culverts;6.Railway, road and other traffic engineering slope protection.

Gabion wire mesh is a high-performance construction material designed for various civil engineering and environmental projects, the plastic geogrid mesh offers a blend of durability, adaptability, and performance. Gabion wire mesh features • Durable Material: Constructed from polypropylene with a minimum carbon black content of 2% for UV resistance. • High Tensile Strength: The gabion wire mesh surface maintains a tensile strength of not less than 30kN/m. • Longevity: Retains over 90% of its initial tensile strength even after 25 years of sun exposure. • Low-Temperature Flexibility: Withstands low temperatures down to -30°C without brittle fracture. • Sized for Purpose: Mesh size starting at M≥53mm, ensuring suitability for different applications. • Customizable: Available in specifications that meet the Q/scKJo08-2023 standard or can be tailored to customer requirements. Applications • Rockfall Protection: PVC coated gabion provides a robust barrier against rockfalls in unstable areas. • Bank Protection: Wire mesh gabion basket offers erosion control and bank stabilization along water bodies. • Construction Barricade Net: Safeguards construction sites, enhancing safety. • Road Safety Fence: PVC coated gabion box serves as a protective barrier along roadsides. • Slope Protection Mesh: Construction gabion stabilizes slopes against erosion and landslides. • Engineering Greening: Gabion wire mesh wholesale supports vegetation growth for environmental restoration. • Municipal Beautification: Enhances urban landscapes with durable and aesthetic solutions. • Water Conservancy: Utilized in water management projects for reservoirs and dams. • Environmental Greening: Geogrid fence contributes to ecological balance in green infrastructure. • Infrastructure Support: Gabion wall mesh reinforces and protects various infrastructure projects. https://www.shuangchengmesh.com/

Our company adopts special technology, over the years for the carbon brush industry specially developed special graphite powder, with uniform particles, high lubrication, wear resistance, less electric spark and other special, by the carbon brush industry users. Variety: T295, T298, T299, T395, T398, T399 Performance: Has good lubrication performance, low trace elements, wear resistance, less spark. Usage: Mainly used for various carbon brushes.

Minimum Order: 1000

Spherical graphite is a lithium ion battery anode material with different purity and different purity produced by advanced spherification of our company's high- quality natural flake graphite. It has the characteristics of high sphericity and high vibration density. Variety: THD-12-40 Performance: Strong chemical stability, high charge-discharge capacity, long cycle life, good safety performance. Usage: Mainly used for lithium-ion secondary batteries.

Special graphite power for power metallurgy Our company selects high-quality natural flake graphite, special processing equipment, advanced production technology, the production of powder metallurgy special graphite powder, with uniform particles, easy to mix, high temperature resistance, increase the strength of the original and other advantages. Varieties: -200 mesh, -325 mesh, FS, F Specification: Particle size 6-50μm, carbon content 90-99.9% Performance: It has the properties of natural flake graphite, and has special oxidation resistance and self-lubrication and plasticity under high temperature conditions. Usage: Mainly used in powder metallurgy industry, as a release agent, and can increase the strength of the original.

Minimum Order: 1000

This product is a green mercury-free battery special graphite developed by our company on the basis of the original ultra-low molybdenum and high purity graphite. It has the characteristics of high purity, excellent electrical properties and ultra-low trace elements. Various trace elements in graphite are strictly controlled by the domestic advanced chemical production process. The technical performance of the products is stable, ranking the advanced level of similar products in China. It can completely replace the imported graphite powder, which can greatly improve the use and storage life of the battery, and is an important raw material for green and environmentally friendly mercury- free alkaline batteries. Type: T-399.9 Performance: high temperature resistance, good electrical and thermal conductivity, strong chemical stability, acid and alkali corrosion resistance, non-toxic and harmless, is an excellent green environmental protection material. Application: Mainly used in green mercury-free alkaline battery, secondary battery, lithium ion battery, tube inside and outside coating.

Earth-like graphite, also known as microcrystalline graphite, earth-like graphite quality, high fixed carbon content, less harmful impurities, sulfur, iron content is very low, enjoy a high reputation in the domestic and foreign graphite market, known as "gold sand" reputation. Carbon content: 80%-99.9% Particle size: 200 mesh -0.5μm Application: Earth graphite is widely used in casting paint, oil drilling, battery carbon rods, steel, casting materials, refractory materials, dyes, fuels, electrode paste, and used as pencils, welding rods, batteries, graphite emulsion, desulfurizer, preservative anti-slip agent, smelting carburizer, ingot protection slag, graphite bearing and other products.

Our company uses high speed mill, Raymond mill, air mill and other advanced grinding equipment. Production of various models of micro powder graphite series products. In the electric carbon products, lubricating materials, fertilizer catalyst, pencil lead, powder metallurgy release agent, as well as rubber, plastic composite materials filler or improver and other industries, widely used, well received by domestic and foreign users. Varieties: FS, F Size: Particle size 1-38μm Performance: It has the performance of high-quality natural flake graphite, has special oxidation resistance and self-lubrication under high temperature conditions, and has good electrical conductivity, electric heating and adhesion. Use: (1) Used as a release lubricant in the production of catalyst in the fertilizer industry; (2) high temperature resistant lubricant base material, corrosion resistant lubricant base material; (3) powder metallurgy release agent and metal alloy raw materials; (4) Used to make carbon film resistance, conductive dry film and preparation of conductive liquid; (5) As a filler or performance improver for rubber, plastics and various composite materials to improve the wear resistance, pressure resistance or conductivity of the material; (6) For the production of graphite milk, grease, etc.

Our company uses special production equipment, advanced testing instruments, the production of high-purity, high-carbon nanoscale graphite powder, by lubrication, lubricating oil, drawing, conductive, ink and other industries applications, the effect is excellent. Variety: 0.5μm Performance: It has good lubricity, electrical conductivity and absorption, ultra-low trace elements and strong dispersion.