Office Supplies & Equipment

1、Product Overview: The equipment adopts Volkswagen Passat B5 automatic air conditioning system as the basis, fully demonstrating the automatic air conditioning system composition structure and working process. Suitable for secondary and higher vocational and technical colleges, general education colleges and training institutions on the theory of automatic air conditioning system and maintenance of practical training teaching needs. 2、Main components: Compressor, all sensors, actuators and air conditioning harness, high and low pressure pipe, condenser assembly, dry bottle assembly, blower assembly, air outlet and air conditioning operating panel assembly. 3、Functional features: (1) The training table measurement panel painted with colorful spray-painted circuit diagrams, using 4mm thickness of high-strength aluminum plastic plate spray-painted, with a large temperature difference, wear-resistant, moisture- proof, anti-corrosion, not easy to deformation, long service life, bright colors, not easy to fade and other characteristics. (2) The operation panel of the training table is installed with air conditioning operation panel and temperature monitor, which can change the parameters of indoor temperature and outdoor temperature in real time. (3) The training table panel is installed with detection terminals, which can directly detect the electrical signals of sensors, actuators, transmission control unit pins on the panel, such as resistance, voltage, current, frequency signals, etc. (4) The training table is built with international standard aluminum alloy profile, with light quality, high strength, corrosion resistance, long life, etc., without the need to go through the spraying process, more environmentally friendly, more beautiful and high-grade appearance, the table frame with self- locking casters, mobile and flexible, safe, reliable, durable. 4、Specification parameters: Overall dimensions: 1300 × 1000 × 1800mm (L × W × H) Power supply: three-phase four-wire (three-phase five-wire 380V ± 10% 50Hz) Input power; AC 220V±10% 50Hz Working power supply; DC 12V Refrigerant: R134a

Minimum Order: 1 bags

Product Introduction The equipment adopts the ABS/ASR body electronic stability system of the original VW car as the basis, can simulate the working state of ABS/ESP system during the operation of the car, easy to operate, safe and reliable. Suitable for higher vocational and technical colleges, general education colleges and training institutions on ABS/ESP body electronic stability system and maintenance of the teaching needs of practical training. Main configuration The original ABS/ESP body electronic stability system, the original ABS/ASR body electronic stability system computer, combined instrumentation, ABS/ESP body electronic stability system operation of all relevant original accessories, fault setting and troubleshooting system, the original circuit schematic and testing terminals, diagnostic socket, governor, removable table, with locking universal casters, etc. Product features 1）The training system consists of an original and complete braking system, which is equipped with disc brakes on the front axle and drum brakes on the rear Thus both brake types are covered in one training system. 2) The brake is actuated by means of a brake pedal, which is connected to the tandem brake cylinder via the brake booster. 3) The brake lines are led from the mechatronic ABS hydraulic unit with ASR functionality to the individual brake calipers. In addition, the ABS control unit with ASR functionality evaluates the signals from the four original wheel speed sensors and regulates the brake pressure in the corresponding brake cylinders. 4) The training table measurement panel is painted with colorful spray-painted circuit diagrams, which is made of 4mm thick high-strength aluminum plastic plate spray-painted with the characteristics of resistance to large temperature differences, wear-resisting, moisture-proof, anti-corrosion, not easy to deformation, long service life, bright colors and not easy to fade. 5) the operating panel of the training table is installed with automotive instrumentation, pressure gauge, real-time display of speed, brake pressure and other parameter changes. Diagnostic seat is installed, which can be connected with special or general-purpose car decoder to read fault codes, clear fault codes, read data stream and other self-diagnostic functions for ABS/ASR body electronic stability system. 6) There are test terminals installed on the panel of the training bench, which can directly detect the electrical signals of sensors, actuators and ABS/ESP body electronic stability control unit pins on the panel, such as resistance, voltage, current, frequency signals, etc. 7) The training table is seamlessly welded with steel frame structure, and the metal surface is treated with high-temperature spraying, with solid paint, bright color, scratch resistance, corrosion resistance, long life, etc. The table is equipped with self-locking casters, which is flexible, safe, reliable and durable. Technical parameters 1) Size: 1500×1000×1800mm (L×W×H) 2) Power supply: three-phase four-wire (three-phase five-wire 380V ± 10% 50Hz) 3) input power; AC 220V ± 10% 50Hz 4) working power; DC 12V

Minimum Order: 1 bags

I. Product Introduction ABS brake system teaching board is made of ABS brake system, which fully demonstrates the composition structure and working process of ABS brake system. It is suitable for teaching ABS brake system theory and maintenance training. II. Functional features 1. The real ABS brake system can be run, fully demonstrate the composition of the ABS brake system structure and work process. Operation control all kinds of switches, can demonstrate the moving ABS brake electronic control system (solenoid valve conditions, etc.) work process. 2. The panel of the teaching board is made of high-grade aluminum composite board that is resistant to trauma, pollution, fire and moisture, and the surface is treated by special process of spraying primer; the panel is printed with colorful circuit diagrams and working principle schematics that never fade; the students can visually compare the circuit diagrams and physical objects to recognize and analyze the working principle of the electric control system of the moving transmission. 3. The teaching board panel is installed with detection terminals, which can directly detect the electrical signals of ABS brake system circuit components, such as resistance, voltage, current, frequency signals, etc. on the panel. 4. The equipment is installed with a diagnostic socket, which can be connected to a special or general-purpose automotive decoder to read fault codes, clear fault codes, read data streams and other self-diagnostic functions for the ABS brake system. 5. The equipment panel part adopts 1.5mm cold plate stamping and forming structure, beautiful appearance; the bottom frame part adopts steel structure welding, the surface is treated with plastic spraying process, with self- locking castor device, the base of the teaching board is equipped with about 40cm desktop, convenient to place information, testing instruments, etc. 6. The equipment works with ordinary 220V AC power supply, which is converted into 12V DC power supply by internal circuit voltage conversion and rectification, without battery, reducing the trouble of charging, 12V DC power supply has anti-short circuit function. Overall dimension: 1240×600×1700mm (L×W×H) External power supply: AC 220V±10% 50Hz Working voltage: DC 12V Working temperature: -40℃～+50℃ Color：7032 Steel tube: 40*40*3mm Cabinet: 1.5mm cold plate stamping and forming, maintenance door set at the back; Mobile casters: 100*60mm

Minimum Order: 1 bags

I. Product Overview The equipment uses the Volkswagen Passat V6 2.8L electronically controlled gasoline engine as the basis for production, the engine can be started, acceleration, deceleration and other working conditions of the practice operation, the real display of the V6 electronically controlled gasoline engine composition structure and work process. II. The functional characteristics 1. Real running Volkswagen Passat V6 2.8L electronically controlled gasoline engine, fully demonstrating the composition of the structure and working process of electronically controlled gasoline engine. 2. The training table measurement panel is painted with colorful spray-painted circuit diagrams, using 4mm thickness of high-strength aluminum composite panel UV spray-painted, with a large temperature difference, wear-resistant, moisture-proof, anti-corrosion, not easy to deformation, long service life, bright colors, not easy to fade, etc.; students can intuitively control the circuit diagram and electronically controlled gasoline engine in kind, recognize and analyze the working principle of the control system. 3. There is a car instrument installed on the training table panel, which can display the engine speed, water temperature, oil pressure light, charging indicator, electric control system fault indicator and other parameter changes in real time. 4. The training table panel is installed with detection terminals, which can directly detect the electrical signals of sensors, actuators and engine control unit pins on the panel, such as resistance, voltage, current, frequency signals, etc. 5. The training bench is installed with diagnostic socket, which can be connected with special or general-purpose car decoder to read fault codes, clear fault codes, read data stream and other self-diagnostic functions for the engine electronic control system. 6. The training bench is equipped with throttle control device, which can facilitate the acceleration and deceleration of the engine. 7. The training table is equipped with a power switch, water tank guard, flywheel guard and other installation protection devices. 8. The training table is made of high quality steel welded, with high strength, corrosion resistance, long life, etc. After spraying process, the appearance is beautiful and high-grade, the table frame with self-locking casters, flexible movement, safe, reliable, durable. III. Specification parameters Product size: 1300*1000*1800mm (L*W*H) Power supply: DC12V

Minimum Order: 1 bags

1.Product Introduction (1) The equipment is composed of two parts: the fixed stand of Volkswagen 1.4 TSI gasoline engine assembly and running accessories and the running test control panel stand after 2013. (2) Volkswagen 1.4 TSI engine training bench engine can be started, acceleration, deceleration and other normal working conditions of the practice operation, the real display of electronically controlled gasoline engine components structure and work process. (3) Volkswagen 1.4 TSI engine training bench is suitable for higher vocational and technical colleges, general education colleges and training institutions on the teaching needs of automotive engine and maintenance practical training. 2. Functional features 1) The real electronically controlled gasoline engine can be run, fully demonstrating the structure and working process of the electronically controlled gasoline engine, the engine can be started, accelerated, decelerated and other normal working conditions of the practice operation. 2) The training table is composed of two parts: the fixed table of engine assembly and running accessories and the table of running testing control panel. 3) The training table panel is painted with color UV plate spraying circuit diagrams, students can intuitively compare the circuit diagrams and engine objects, recognize and analyze the working principle of the control system; the panel adopts 4mm thick corrosion-resistant, trauma-resistant, pollution- resistant, fireproof, moisture-proof senior aluminum plastic plate, the surface is treated by a special process of spraying primer; the panel is printed with colorful system circuit diagrams that never fade. 4) The panel of the training table is installed with detection terminals, which can directly detect the electrical signals of sensors, actuators and engine control unit pins on the panel, such as resistance, voltage, current, frequency signals, etc. 5) The equipment testing panel is equipped with a 20cm steel table in front of the base, which is convenient for placing data, testing instruments, etc. 6)The training table panel is installed with automotive instrumentation, fuel pressure gauge, vacuum pressure gauge, which can display real-time changes in parameters such as engine speed. 7) The training table is installed with a diagnostic socket, which can be connected with a special or general-purpose car decoder to read fault codes, clear fault codes, read data streams and other self-diagnostic functions for the engine electronic control system. 8) The training table is equipped with power switch, engine emergency stop button and protection device. 9) The base of the training table is welded with steel structure, the surface is treated with spraying process, with self-locking casters, flexible movement, safe, reliable and durable. 10) Configured with fault insertion, evaluation, and data acquisition system. 3. Technical specifications Working power: DC 12V (battery: 60AH 12V) Fuel grade: according to the engine model Fuel tank volume: 10L Operating temperature: -40℃～+50℃ Color：7032 Steel tube: 40*40*3mm Panel cabinet: 1.5mm cold plate stamping and forming Mobile casters:120*80mm Shape:1500*1000*1700mm(L*W*H)

Minimum Order: 1 bags

Essential details Type:Other Model Number:iR ADVANCE C3320 C3320L C3320i C3325i Place of Origin:Guangdong, China Brand Name:Printwindow Package:Genuine Package Packaging & delivery Selling Units:Single item Single package size: 57X13X17 cm Single gross weight:1.276 kg Package: Genuine Package Color: Brown Material:Paper

Minimum Order: 1 bags

Selling Units:Single item Single package size: 36X6X5 cm Single gross weight:1.000 kg: Package: Neutral Package Color: Brown Material:Paper

Minimum Order: 1 bags

I. Product introduction The equipment uses the automobile four-wheel drive chassis systems as the basis, fully demonstrating the composition structure of the automobile chassis systems. Including automobile front and rear suspension system, steering system, transmission system, manual transmission and gear mechanism, braking system and other systems, the installation of casters movable table and other components. Applicable to the teaching needs of the theory and maintenance training of the chassis systems in schools. II. The functional characteristics 1. Install the real car chassis systems (including front and rear suspension system, steering system, transmission system, manual transmission and gear mechanism, braking system), fully demonstrate the composition of the car chassis systems structure. 2. Can be true to the car chassis systems show and disassembly training. 3. Dissected manual transmission can be dynamic demonstration and testing, reducer motor input power, the transmission can be shifted and dynamic testing. 4. The base of the training table is welded with steel structure, the surface is treated with spraying process, with self-locking casters, flexible movement, safe, reliable, durable. III. Technical specifications Dimension: 2600×1700×1500mm(L×W×H) Power supply: 220V Working temperature: -40℃～+50℃ Host: the original device Electric motor: 220V/250W 15rpm Steel pipe: 60 * 40 * 3mm Mobile casters: 100*50mm

Minimum Order: 1 bags

Sheet Size:210mm x 297mm, International Size A4 Quality: 100% Recycled paper Whiteness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 152-170 Cobb Test: 27-33 g/m2 27-33 Grade paper : High grade Quality : No jam in photocopy machine No double feed Stay flat after copying Leave no dust in the copy-machine Nice appearance-white and clean Nice touch-smooth and bulky No see through-print both sides 1 Box : 5 reams 1 reams : 500 sheets

Minimum Order: 7800

High Brightness & Whiteness High thickness & Optimized Smoothness Jam Free Performance and Reliability High Opacity- Double Sided Copying Specifications: Sheet Size:210mm x 297mm, International Size A4 Quality: 100% Virgin Wood Pulp Whiteness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 152-170 Cobb Test: 27-33 g/m2 27-33 Grade paper : High grade

Minimum Order: 7800

Been developed for : Photocopy Machines, Fax High Speed Copying 100ppm, Laser printers, Inkjet Sheet Size:210mm x 297mm, International Size A4 Quality: 100% Virgin Wood Pulp Whiteness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 152-170 Cobb Test: 27-33 g/m2 27-33 Grade paper : High grade Packing : 1 Box : 5 reams 1 reams : 500 sheets

Minimum Order: 7800

Sheet Size : A4 (210mm x 297mm) Substance : 80gsm Brightness : 102-104% above Color : white Whiteness : CIE167 Grade : All purpose Premium Paper Sheet in Ream : 500 Roughness : 140ml/Min Thickness : 110um Opacity : 95% Ream box : 5 Ream Quality : Very High Imported 100% Virgin Wood Pulp Grading : A Thickness : 106cm Capability : High Speed Copying 100ppm, Laser Capable,Inkjet Capable, Fax Capable Moisture Control : Makes the sheets stay flat in the copier and enchances runability. Low Dust Content : Minimizing Your copier runing cost. Good Opacity : Double sided copying of the best quality. Smoothness : Improving Printing Quality. Bulky Sheet : Enhancing smooth runnability

Minimum Order: 7800

Specifications: : Sheet Size:210mm x 297mm, International Size A4 Quality: 100% Virgin Wood Pulp Whiteness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 152-170 Cobb Test: 27-33 g/m2 27-33 Grade paper : High grade Quality : No jam in photocopy machine No double feed Stay flat after copying Leave no dust in the copy-machine Nice appearance-white and clean Nice touch-smooth and bulky No see through-print both sides 1 Box : 5 reams 1 reams : 500 sheets Packaging : plastic wrapping For more information,feel free to contact us

Minimum Order: 8000

Specifications: : Sheet Size:210mm x 297mm, International Size A4 Quality: 100% Virgin Wood Pulp Whiteness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 152-170 Cobb Test: 27-33 g/m2 27-33 Grade paper : High grade Quality : No jam in photocopy machine No double feed Stay flat after copying Leave no dust in the copy-machine Nice appearance-white and clean Nice touch-smooth and bulky No see through-print both sides 1 Box : 5 reams 1 reams : 500 sheets Packaging : plastic wrapping For more information,feel free to contact us

Minimum Order: 8000