Others & Excess Inventory - Others

Descriptions: This instrument and built-in microprocessor chips, good looking, feature rich, easy to use, with the following notable features: 1. High accuracy 0.001 2. new designs, large screen displays 3. User-friendly interface, stability indicating identity 4. Three standard, two-point or single-point automatic calibration 5. Automatic temperature compensation, or manual temperature compensation of 6. Wide range of PH and redox potential measurements Technology Parameters >> Range pH -2.000 ~ 16.000 pH mV -1999.9 ~ 1999.9mV Temp 0 ~ 100°C Resolution pH 0.001 pH mV 0.1 mV Temp 0.1 °C Accuracy pH ±0.001pH , mV ±0.1 mV (0 ~ 550 mV)； ±0.2 mV (550 ~ 1999mV) Temp ± 0.1° C Automatic Temperature Compensation 0 ~ 50°C pH Calibration 1 or 2 points with auto buffer recognition Input impedance 1012 Ohm Power Supply 12 Vdc Environment Temperature:0℃~50

Minimum Order: 1 bags

Product description : Model PH-98203 Measuring range 0.00-14.00PH Resolution 0.01PH A , ccuracy ±0.1pH(@20℃) ±0.2PH Power Supply 3×1.5V(AG13) Operating Temperature 0℃～50℃ Dimensions 175mm , ×51mm×25mm Weight 57g

Minimum Order: 1 bags

*Waterproof design（IP55） *Economical Meter *It can be used for testing the acidity or alkaline levels of almost any liquid, in a wide variety of applications. Measuring range 0.00～14.00PH Accuracy ±0.1PH Resolution 0.01PH Op , erating Temperature 0℃～50℃ Automatic Temperature Compensation 0℃～50℃ Power Supply 3×1.5V（AG13） Calibration , Manual 1 point Dimensions 160mm×22mm×20mm Weight 55g

Minimum Order: 1 bags

Product description : The DO-66 type pen type intelligent Dissolved Oxygen Analyzer (hereinafter referred to as the instrument) is designed to facilitate the user to carry the operation on the spot. The instrument can be divided into two parts: the sensor and electronic unit. The sensor adopts thin film dissolved oxygen electrode. The electronic unit is an integrated operational amplifier + microcomputer chip with automatic temperature compensation function. Measurement range DO 0~199.9% 0 ~16.50mg/L Temperature 0～50℃ 32~122℉ Resol , ution DO 0.1% 0.01mg/L Temperature 0.1℃ 32.18℉ Accuracy& , lt; , br>DO ±1.5%F.S Temperature ±1℃ ±33.8℉ Residual current No more than 0.15mg/l response time No more than 15 seconds Temperature compensation 0℃～50℃ Power supply 2 *AAA batteries Operating Temperature 0℃～50℃ Dimensions 207*3 , 2*36mm weight 85g（No batteries included）

Minimum Order: 1 bags

Description: •Pre-amplified electrode •Narrow, replaceable probe •Easy to hold and operate Specifications: Measuri , ng Range 0.00 ~ 14.00PH Accuracy ±0.1PH Reso , lution 0.01PH Operating Temperature 0°C ~ 50°C Automatic Temperature Compensation 0°C ~ 50°C Power Supply 4×1.5V(AG13) Dimensions & , lt; , br>320×36×23 mm - with electrode Weight 115g

Minimum Order: 1 bags

This compact tester features a large easy-to-read LCD. Unlike other pH testers, the pH electrode can be interchanged with any pH electrode of different size and shape. This allows you to use application specific electrodes and saves the cost of a new meter when it is finally necessary to replace an exhausted electrode. The tester is fast, accurate, lightweight. Testing pH has never been easier! Measuring range 0.00-14.00PH Resolution 0.01PH Accuracy ±0.1pH(@20℃) , ±0.2PH Power Supply 3×1.5V(AG13) Operating Temperature 0℃～50℃ Dimensions& , lt; , br> 175mm×51mm×25mm Weight 5 , 7g

Minimum Order: 1 bags

Descriptions: •Dual level LCD display •Automatic temperature compensation •Replaceable pH electrodes The KL-081 is a 2 in 1 tester that measures pH as well as temperature reading in water. This is especially convenient where pH and temperature readings are needed. Now you do not need to buy another thermometer and you also save time between test. The automatic endpoint reading mean that technician will not need to guess the endpoint of a pH reading, thus ensuring accurate records of data all the time. Specifications: Me , asuring range pH 0.00~14.00PH Temp 0℃~55℃ Resolution pH 0.01PH Temp 0.1℃ , Accuracy pH ±0.1PH Temp ±1℃ Operating Temperature 0℃~50℃ Automatic Temperature Compensation 0℃~50℃ Power Supply 4×1.5V(AG13) Dimensions 175mm×41mm×23mm Weight 98g

Minimum Order: 1 bags

Description: •Waterproof and it floats! •KELILONG’s exclusive cartridge pH and ORP electrode •Extendable cloth pH junction •Automatic Temperature Compensation PH-099 is a waterproof pH, ORP and temperature meter. The housing has been completely sealed against humidity and designed to float. All pH readings are automatically temperature compensated(ATC). Measurements are highly accurate with a unique stability indicator right on the LCD. The pH electrode is replaceable and can be easily replaced by the user. Specifications: Range mV 0 ~ ±1999mV pH 0.00 ~ 14.00 pH Temp 0 ~ 55°C Resolution mV 1 mV pH 0.01 pH Temp 0.1°C Accuracy mV ±5mV pH ±0.1 pH Temp ±1°C Automatic Temperature Compensation 0 ~ 50°C Electrode replaceable pH electrode (included); fixed ORP sensor Power Supply 4 x 1.5V(AG13) Environment 0 to 50°C Dimensions 170 x 40 x 23 mm Weight 100 g

Minimum Order: 1 bags

This compact tester features a large easy-to-read LCD. Unlike other pH testers, the pH electrode can be interchanged with any pH electrode of different size and shape. This allows you to use application specific electrodes and saves the cost of a new meter when it is finally necessary to replace an exhausted electrode. The tester is fast, accurate, lightweight. Testing pH has never been easier! Model KL-98105 KL-98106 KL-98107 PH-98108 , Measuring range 0.00~14.00pH Accuracy

Minimum Order: 1 bags

Descriptions: The KL-98102 is an ideal pocket tester for educational purposes. Designed with a 0.01 pH resolution and one-point manual calibration through easy-to reach trimmers, it immediately displays pH variations to reflect the smallest change in the sample. With only two operation buttons, it allows immediate and precise response in a concise design. This is a rugged unit that can be used again and again. The probe is even durable enough to be used as a stirrer. The HOLD button will freeze the display reading for your documentation requirements. Model KL-98102 KL-9 , 8102B Measuring range 0.00～14.00PH 0.00～14.00PH Accur , acy 0.01PH 0.01PH Resolution ±0.2pH ±0.2pH Power Supply 3×1.5V（AG13） 3×1.5V（AG13） Environment Temperature:0℃~50℃; Humidity:≤95℅ Temperature:0℃~50℃; Humidity:≤95℅ Dimensions 97mm×29mm×36m , m 97mm×29mm×36mm Weight 50g 50g E , lectrode Replaceable pH electrode (included) Elbow pH electrode(included)

Minimum Order: 1 bags

Descriptions: •Renewable junction •Easy 1 point manual calibration •Simple to use •Economical The Champ revolutionized the pH industry by providing non-technical personnel with a simple, inexpensive solution to accurate pH measurement. PH 98081 is used by millions of people around the world to monitor pH in laboratories and industrial applications as well as in agriculture, fish farming, food manufacturing and quality control, swimming pools and the printing industry. With a renewable cloth junction, the Champ has an extended life over typical pH testers. A normal junction clogs with use over time and a typical tester would normally have to be thrown away once the junction is too contaminated. PH 98081’s junction is 2 cm long and when dirty, can be pulled out to expose a fresh section to effectively renew the Champ’s life. Calibration is performed manually at 1 point with a trimmer located on the side of the tester. Specifications: Mea , suring range 0.00~14.00PH Accuracy

Minimum Order: 1 bags

Description: •Automatic Temperature Compensation •Simple one point calibration •Easy to use •Economical It is a fast and accurate meter. What you save in buying drop type test kits will more than pay for this meter! And those kits are not usually very accurate. You will never have to guess which color the ph Strips are closest to! It is fast and simple to use. Just dip it in the pond, aquarium or swimming pool and read the reading on the digital display in just a few seconds. This PH Meter is ideal for Aquariums, Aquacultures, Fish Hatcheries, Food Processing, Laboratory, Paper Industry, Swimming Pool, School & colleges. Specifications: Measuring Range 0.0 ~ 14.0pH Accuracy ±0.1PH Resol , ution 0.1PH Operating Temperature 0 ~ 50℃ Automatic Temperature Compensation 0 ~ 50℃ Power Supply 4×1.5V(AG13) Dimensions & , lt; , br>150mm×29mm×15mm Weight 51g

Minimum Order: 1 bags

Description: •Pre-amplified electrode •Narrow, replaceable probe •Easy to hold and operate KL-009(I)C is a revolutionary pH meter with amplified electrode. Conventional pH meters are susceptible to the weak, high impedance signal which makes the electrode, connector, cable and meter vulnerable to noise, humidity and dirty environments. 009(I)C has overcome these problems with a pre-amplified electrode delivering a strong signal to the meter. The interchangeable electrode is inexpensive, rugged and houses the pH sensor, reference system. Specifications: , Measuring Range 0.0 ~ 14.0pH Accuracy ±0.1PH Resol , ution 0.1PH Operating Temperature 0 ~ 50℃ Automatic Temperature Compensation 0 ~ 50℃ Power Supply 4×1.5V(AG13) Dimensions & , lt; , br>310mm×29mm×15mm - with electrode Weight 85g

Minimum Order: 1 bags

Range EC 0.00 ～ 4.00 mS/cm TEMP 0～50℃ Resolution EC 0.01 mS/cm TEMP 0.1℃ Accuracy EC ±2℅F·S , TEMP ±1℃ Automatic Temperature Compensation 0℃～50℃ Battery Type 4×1.5V(AG13) Operating Temperature 0℃～50℃ Dimensions 290x 35 x 35 mm Weight 109g

Minimum Order: 1 bags