Paper, Packaging & Printing Machinery

This Low-level Carton Palletizer Stacking System is used to stack sealed cartons in order on a pallet. It works automatically and cartons can be stacked on a pallet by multiple layers. It employs a touch screen PLC controller and is easy to operate. Composition: 1. Carton sorting feeder Sort cartons according to a set pattern and then convey them. 2. Carton palletizer Catch sorted carton(s) and then rise, move and put it/them on a pallet. 3. Pallet storage and feeder 5-10 empty pallets can be stacked in the storage section. Pallets are fed to the palletizer according to the PLC setting. 4. Loaded pallet deliver When a pallet is loaded fully, it will be delivered to an designated location. Specifications: Type: low-level, coordinates Max palletizing capacity: 7 cycles/min (1-4 cartons per cycle which depends on the carton size and weight) Power supply: 3 phases, customized voltage, 6KW Air consumption: 500NL/MIN Air source pressure: 5-6 kgf/cm2 Weight: 2,000 kg

Minimum Order: 1 bags

Carton erector and bag inserter. This lined carton or bag in box forming line erects cartons and seals bottoms, inserts poly bags in cartons by one each from a roll stock film, opens and cuffs the bag over the carton flaps, blows air to extend the bags to fit on the internal wall of cartons better to form lined cartons ready for filling products. This line includes a carton erector and a poly bag inserter (also called carton lining machine). 1. Carton Erector Also called case former. It erects cartons, folds and seals bottoms with tape or hot-melt glue. Specifications: Erecting type: vertical or horizontal. Sealing media: tape Erecting capacity: max. 10 cartons/min or 25 cartons/min (depends on the carton size) Applicable carton dims: 410mmW/2+H>310mm Applicable tape width: 4.8-7.2cm Power supply: single phase, 400 W/1.5kW Compressed air: 6 bar Carton storage: 50 pcs (depends on the thickness of fold-flat carton) 2. Poly Bag Inserter Also called Carton Lining Machine or Liner Placer. This poly bag inserter inserts a poly bag in a box from a roll stock film, open and cuff the bag over the carton flaps, blow air to expand the bag to fit on the internal wall of carton better. The lining machine reduces labor and material costs, is simple to operate and easy to adjust. High efficiency and labor saving. Specifications: Inserting capacity: 6-7 cartons/min Film width: 460-840mm Applicable carton dims: L250-550*W200-400*H150-40 0mm, also can be customized Power supply: 3 phase, 4.5 kW Compressed air: 6 bar Air consumption: 100 NL/min Machine dims: L3,322*W2,177*H2,350mm (for reference only) We are also able to manufacture high-speed carton lining machines with 12 cartons/minute.

Minimum Order: 1 bags

Monoblock case packer for packaging stand up pouches. This is a fully-automatic form-insert-seal 3-in-1 cartoning machine for stand up pouches designed and manufactured for a US customer. A delta robot (ABB IRB 360 FlexPicker) is employed for picking and inserting filled pouches in cartons. ABB IRB 360 FlexPicker is capable of the fastest picking applications and have been optimized for packing applications. The robot has outstanding motion performance with the shortest cycle times, precision accuracy for payloads from 1 to 8 kg. Carton form, pouch inserting and carton sealing 3-in-1. This monoblock case packer is easy to be installed and an ideal cartoning machine for the epedemic period as it is the diffcult time to have technicians for installation from suppliers abroad. Features: 1. Form-insert-seal 3-in-1, with a smaller footprint. 2. Easy to install. 3. System pauses and alert if cartons or tapes are empty. Specifications: Capacity: 450 cartons, 2700 x 1 litre pouches/hour Compressed air: 0.6-0.8MPa Max tape roll diameter: 300mm System weight: 6,000kg Power supply: 3 phases, customized voltage System dimensions: 5,300*2,800*2,800mm. Power consumption: 5kW

Minimum Order: 1 bags

Rotary filler and capper for pre-made stand-up pouches. This is a rotary filling and capping machine for pre-made (stand-up) pouches with spouts and caps. It can process 3 pre-made pouches at once and the capacity is up to 45 x 1 liter pouches per minute . This filler and capper is ideal to package liquid or semi-liquid food products like dairy alternative, sauce, beverage, edible oil and more. Non-food applications include synthetic oil, liquid soap, paint, shampoo, lotion, liquid detergent and more. Both corner spouted pouches and center spouted pouches are applicable to this machine. Our R&D is strong and we can customize pouch filler for pouches with not only double-layer but also single-layer sloted spouts. Specifications: Applicable pouches: premade, corner or center spouted pouches Pouch width：max. 350mm Pouch height：to be confirmed Gusset size：to be confirmed Pouch spout diameter：16mm or more Filling range：1000-4000ml Number of filling heads: 3 Number of capping heads: 3 Capacity：45 x 1L pouches/min We also have a form-insert-seal monoblock case packer for stand-up pouches as the downstream packaging solution.

Minimum Order: 1 bags

Poly bag sealing machine for carton liner. This bag sealer is designed to heat- seal liner bags in boxes online. The sealer uncuffs the bag off the carton flaps, then folds it inwards from sides, vacuumizes the bag (optional), heat-seals the bag top and then folds it in the carton. This bag sealer reduces labor and material costs, is simple to operate and easy to adjust. High efficiency and labor saving. Specifications: Sealing capacity: 3-5 cartons/min Film width: 460-840mm Applicable carton dims: L250-550*W200-400*H150-400mm, also can be customized Power supply: 3 phases, 7 kW Compressed air: 6-7 bar Air consumption: 100 NL/min Machine dims: L3322*W2177*H2350mm (for reference only) We also have a bag inserter or liner placer for lining cartons with poly bags by one each. The whole erect-line-fill-seals bag in box line is also available.

Minimum Order: 1 bags

Poly bag inserter for placing liner in drum. This fully-automatic poly bag inserting machine is especially designed for placing liners in NARROW-NECK drums by one each. The bag inserting machine cuts and seals film as a bag from a roll stock, opens and covers the bag over a narrow-neck drum, plungs the bag down into the drum bottom, blows air to extend the bag to fit the internal wall of drum better. This bag inserter reduces labor and material costs, is simple to operate and easy to adjust. High efficiency and labor saving. Specifications: Inserting capacity: 6-7 drums/min Film width: 460-840mm Power supply: 3 phase, 4.5 kW Compressed air: 6 bar Air consumption: 100 NL/min Machine dims: L3322*W2177*H2350mm (for reference only) We also have bag inserters for placing liners in cartons.

Minimum Order: 1 bags

Poly bag inserter (carton lining machine, liner placer) for placing liner in carton or case. This China-made fully-automatic bag inserting machine inserts a poly bag in a box from a roll stock film, opens and cuffs the bag over the carton flaps, blows air to extend the bag to fit the internal wall of carton better. The bag inserter reduces labor and material costs, is simple to operate and easy to adjust. High efficiency and labor saving. Specifications: Inserting capacity: 6-7 cartons/min Film width: 460-840mm Applicable carton dimensions: L250-550*W200-400*H150-40 0mm, also can be customized Power supply: 3 phase, 4.5 kW Compressed air: 6 bar Air consumption: 100 NL/min Machine dimensions: L3322*W2177*H2350mm (for reference only) We are also able to manufacture high-speed bag inserter with 12 cartons/minute.

Minimum Order: 1 bags

Lined carton bag in box forming filling and sealing line. This bag in box line is designed for packaging nuts or granules in bulk with bags in boxes. Erect cartons and seal bottoms to form boxes, insert and line open-top bags in cartons, fill products, heat-seal bags and seal box top, all automatically. The bag in box line includes a carton erector, a carton liner (lining bags in erected cartons by one each), a filling machine, a liner bag sealer, a carton sealer and conveyors. The cartons can be sealed with tape or hot melt glue. The carton liner inserts a poly bag in a box, open and fold the bag top over the box top. The liner reduces labor and material costs, is simple to operate and easy to adjust. High efficiency and labor saving. The liner bag sealer takes the folded bag top off the box top, then fold it inwards from sides, vacuumize the bag (optional), heat-seal the bag top and then fold it in the box. Specifications: Applicable cartons: L250-550*W200-400*H150-400mm Applicable bags (width): 460-840mm Capacity: max. 180 boxes/hour We also have a bag in box line for packaging liquids.

Minimum Order: 1 bags

Bag in box line for packaging semi-liquids in bulk. Ideal for bulk packaging margarine, butter and shortening with bag in box. The finished product is a spoutless bag in box, different from a standard bag-in-box which is with a spout and fitment. The line erects cartons and seals bottoms, inserts and lines bags in cartons by one each from a roll stock film to form bag-in-box packaging (lined cartons), weigh fills with hot-melt margarine/butter/shortening, vacuumizes and heat-seals the bag tops, seals the box tops. The China-made bag in box line includes a carton erector, a poly bag inserter (carton lining machine), a weigh filler, a bag sealer, a carton sealer and conveyors. The cartons can be sealed with tape or hot melt glue. This bag inserter feeds film from a roll stock, cuts and seals to form a bag, inserts the bag in an erected carton, opens and cuffs the bag over the carton top flaps, blows air to extend the bag to fit the internal wall of carton better. The machine reduces labor and material costs, is simple to operate and easy to adjust. High efficiency and labor saving. The bag sealer uncuffs the bag off the carton top flaps, then folds it inwards from sides, vacuumizes the bag (optional), heat-seals the bag top and then flattens it in the carton. The product-contact parts in the filling machine are made of 316L stainless steel, acid-proof and corrosion-resistance. Specifications: Ap , plicable cartons: L250-550*W200-400*H150-400mm Applicable bags (width): 460-840mm Capacity: max. 300 boxes/hour We also have a bag in box line for packaging nuts or granules.

Minimum Order: 1 bags

Monoblock cartoning machine for bag-in-box packaging. This is a fully-automatic form-insert-seal 3-in-1 packaging machine for cartoning filled 3-25 litre bags as final bag-in-box products. It works by erecting flat-fold cartons and sealing their bases to form boxes, inserting filled bags in boxes by one each from conveyor with the help of hopper, sealing the carton box tops with tape or hot- melt glue, fully-automatically. The bag-in-box cartoning machine can be customized according to customers' requirements. This monoblock packaging machine can be installed easily by customers themselves. Features: 1. Form-insert-seal 3-in-1, with a smaller footprint. 2. Easy to install. 3. System pauses and alerts if cartons or tape/glue are empty. Specifications: Capacity: 5-10 boxes/min Compressed air: 0.6-0.8MPa Power supply: 3 phases, customized voltage System dimensions: 5,300*2,800*2,800mm. Power consumption: 5kW

Minimum Order: 1 bags

This China-made fully-automatic bag-in-box (bib) filling and packaging line is especially designed for food packaging and widely used for packaging spring water, post mix syrup, edible oil and beverage. Certainly it also can be used for packaging liquid soap, motor oil, diesel exhaust fluid (AdBlue/DEF), engine coolant. The bib filling and packaging line includes: Bag-in-Box Filler, Carton Erector, Bag Inserter, Carton Sealer, Conveyors and other assistant equipment. The whole line is fully-automatic. Grade 304 stainless steel construction and grade 316L stainless steel fluid-contact parts. World famous brands of key components and many are imported. Made in China, but built at high quality level. Procedures of the whole line: 1) Automatically feed bags. 2) Automatically pull cap, fill, cap and cut bags apart. 3) Automatically erect cartons and seal bottoms with hot melt glue. 4) Automatically insert filled bags in boxes. 5) Automatically seal the box tops with hot melt glue. Box Sealing of Bag-in-Box Filling and Packaging Line BIBFPL600 1. Fully-automatic Bag in Box Filling Machine The Fully-automatic Bag in Box Filling Machine is designed for filling spouted bags with a wide range of liquids like drinking water, post mix syrup coke, edible oil and beverage. It features fully-automatic by employing PLC and touch screen control system. The whole process of continuous bags feed, decapping, vacuumization (optional), nitrogen injection (optional), filling, capping, cutting apart from continuous bags and transiting to the conveyor can be completed automatically, no human operation required. This filling machine can cap various spigots including Vitop and Scholle's. It is designed with CIP (Clean in Place) function and pipeline connection. Grade 304 stainless steel body and 316L stainless steel fluid-contact parts. Features: 1) Fully-automatic, WEB type bags fed. 2) Easy to use. The touch-screen control system makes operation easy. 3) An electromagnetic or turbine flowmeter employed improves filling precision and truly achieves the quantitative filling. 4) An air filter employed brings clean air to the filling space. 5) Grade 304 stainless steel body and 316L stainless fluid-contact parts. 6) Filling a different capacity bag acceptable only by changing the setting. 7) Options of vacuumization and nitrogen injection available for specific products use. Specifications: Applicable bags: pre-cut continuous module or WEB type bags, spout-fitted, 3-25 litres. (Spout is called Gland or Flange too.) Filling capacity: 450-510 bags/hour for 5 litres 360-400 bags/hour for 10 litres 250-270 bags/hour for 20 litres Power: 1.0 kW Compressed air: 6-8 bar, 500 NL/min 2. Carton Erector (Erecting carton and sealing bottom) Erecting capacity: 6-7 cartons/min Coated carbon steel construction Hot Melt Glue System: Nordson 3. Bag Inserter (Inserting filled bags in cartons) Inserting capacity: 15 bags/min Grade 304 stainless steel body 4. Hot Melt Glue Box Sealer (Closing and sealing top) Sealing capacity: 10 cartons/min Coated steel construction Hot Melt Glue System: Nordson 5. Conveying Systems Grade 304 stainless steel

Minimum Order: 1 bags

Markem 10053340 / KCE-32-12PBH1-MKM OEM Thermal Printhead for SmartDate X40 32mm Markem OEM Printhead 10053340 para smartdate X40 (32 mm) – kce-32 – 12 pat1- x40 Markem-Imaje OEM Replacement Printhead, Smartdate 5A/X40, 32mm, 300dpi

Minimum Order: 1 bags

Brand:Wasp Print Resolution:203 dpi Printer Model:Wasp WPL205 & WPL305 Extend the life of your thermal printheads through regular cleaning with a thermal cleaning pen. Specially designed to help remove buildup caused by the thermal printing process. Wasp Barcode offers a complete line of replacement thermal printheads specifically designed to work with our complete line of barcode label printers. Wasp 633808402167 Thermal Print Head 203 Dpi WPL205 & WPL305 printers.

Minimum Order: 1 bags

Avery Dennison thermal printheads are available for worldwide shipping. This is a Branded Avery-Dennison OEM Printhead that arrives in a Branded Box. This is not a remanufactured and not remanufactured Printhead - BRAND New, Branded and OEM. Three Manufacturers. Kyocera, Rohm and Toshiba. These three Manufacturers make the majority of OEM printheads for various manufacturers of Thermal Printers Our warranty is the Avery-Dennison New Avery Dennison thermal printhead warranty. Country of Origin: Made in China. Engineered in the USA. Environmental Protection: Pressure Sealed Circuits Installation: Same as OEM. Drop in Replacement

Minimum Order: 1 bags