Other Real Estate

Dimple Sheet Product Description Dimple sheet is a waterproofing protective membrane. PE polymer resin as the raw material, the composite drainage membrane is a waterproof and drainage material with three-dimensional space and certain support stiffness, in the meantime the liquids and gases can go freely through it. The dimple sheet acts as a critical component for keeping basements dry and also relieves hydrostatic pressure in foundation, thus extending the life of the waterproofing and the foundation structure. Dimple sheets are a foundation waterproofing protection system that protect from water intrusion as well as provide an efficient and cost-effective drainage plane. Dimple sheet features with resistant to chemical corrosion, plant roots puncture and easy installation. Specification of Dimple Sheets Sheet material: PE Dimple height: usually 6mm, 8mm, 10mm, 12mm, 15mm and 20mm Thickness: usually 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.5mm and 2.0mm Width: 2-3 m

EcoGeoX Stormwater Management Product Description The EcoGeoX-Tank System provides the most efficient and versatile method of underground stormwater storage available today. It's an ideal way to convert stormwater ponds to useable space, and EcoGeoX-Tank is a more efficient, space saving alternative for underground stormwater detention, infiltration, and recycling systems. Assembly of Stormwater Storage Module Unit Always install upright for Maximum strength and for Warranty. Evenly distribute and connect the small panels into large panel. Next, working from one end to the other, attach a second large plate on the opposite side of the first. Once the top and bottom large plates are attached, complete the sides of the tank module. Multiple Stormwater Storage Modules Assembly To build a DOUBLE storm storage module unit (or even larger), follow the directions below, starting at "Assembly Instructions:" using the top of the existing unit as the large plate. Completed tank modules should be staged as close to the installation area as possibie. Maintenance of Stormwater Storage Modules Installing the Maintenance System To install the PCV Pipe, remove the center small plate and cut the top large plate between the remalning interior small plates. Before inserting the port into the Tank, install an anti-scour plate in the bottom of the Tank to prevent disturbance of the base materials. Maintenance ports should be capped at the surface.In landscaped areas, this may be accomplished with a simple pipe cap or plasticvalve box. In paved areas, metal Tidsare moreappropriate.

Concrete Protective Liners Product Description V-type anchor concrete protective sheet, also known as concrete protective liners, multi-point anchor PE plate, plastic pin waterproof coil, different names for the different application fields. This is a new multipurpose waterproof protective sheet, this product uses HDPE, LDPE and PP as raw materials, applicable in many fields. The product has the characteristics of corrosion resistance, acid and alkali resistance, no toxic and side effects, smooth and firm fit with the main body of the application, flexibility, ductility, convenient construction and so on. As concrete protective liners are used on concrete structures under harsh conditions. Concrete protective liners are mainly used in liquid transportation and storage, pipes, seawater immersion, concrete structures in saline areas, and chemical resistance that cannot be ignored. Product specifications and models: MJ215, MJ315, MJ415 Sheet thickness: 1.5mm-5mm Studs height: 13mm-19mm Effective width: 1500mm Product color: the common colors are black, white and yellow.(Can be customized on customer request). Main uses: inside of large cement pipeline, mariculture pond, landfill, sewage water treatment pool, sewage treatment tunnel, hazardous waste and corrosive site treatment, bridge column pier underwater part, water conservancy and power station, dam, etc.

Concrete cement blanket Product Description Cement blankets are also named geosynthetic cementitious composite mats or cement blanket concrete erosion control mats. Cement blankets can provide an effective solution for preventing erosion on slopes, embankments, and other areas with high water flow. Needle method cement mat is a mat material made of two layers of geotextile wrapped dry concrete mixture acupuncture, which provide strength and stability to the mat.It is a flexible, concrete impregnated fabric that hardens on hydration to form a thin, durable, waterproof and fire-resistant concrete layer. It is used in concrete channel lining, slope protection, bund lining, remediation of existing concrete structures, and culvert lining. Cement blanket is an advanced product which can be quickly and easily formed taking the preferable shape. Hydrated with a small amount of water, it can be very quickly durable with a firm structure serving as a ground structure reinforcement or a protective layer. Mass of composite cement mat: 8kg/㎡, 10kg/㎡, 12kg/㎡, 15kg/㎡ and etc. Features of Cement Blankets • Geosynthetic cementitious composite mats are highly durable and can withstand extreme weather conditions, such as heavy rain, high winds, and freezing temperatures. • Geosynthetic cementitious composite mat are designed to be easy to install, with interlocking sections that can be quickly assembled on-site.

Geocell is one three-dimensional honeycombed cellular structures that form a confinement system when infilled with compacted soil.  It is widely used in construction for erosion control, soil stabilization on flat ground, shorelines, steep slopes, multi-layered retaining walls, channel protection and structural reinforcement for heavy duty load support roads and earth retention etc. project. Product height: 50mm, 75mm, 100mm, 150mm, 200mm, Welding distance: 330mm, 400mm, 440mm, 450mm, 500mm, 600mm, 660mm, 800mm, 900mm, 1000mm Membrane thickness: 1.0mm, 1.1mm, 1.2mm, 1.5mm Surface could be smooth or textured, with or without perforated, color could be customized.

PRODUCT DESCRIPTION Aluminum Alloy Square Truss Stage Lighting Truss Systems Product Description: Square truss frame has the advantages of overlapping shear center and centroid, good torsional performance, large bending stiffness, and beautiful appearance of composite structure. Therefore, it has been used more and more. The bolted square truss is a planar or spatial structure, which is composed of straight bars connected by hinges at both ends. The bolted square truss is a span structure. Material Aluminum Alloy 6061-T6 Brand Name LEDIKA Length available 1m,2m,3m,4m. OEM offered. Shape Ladder/Triangle/Square/Curve/Circle Truss size 120*120mm 220*220mm 290*290mm 400*400mm 520*520mm 760*520mm Main tube size 20*2mm, 30*2mm, 50*2mm &50*3mm 50*3mm 50*3mm 50*3mm& 50*4mm Color Silvery and Black or Customized Type Spigot and Bolt Certification TUV Characteristics Spigot truss:easy to assemble and dismounting Bolt truss: durable, light weight with heavy loading capacity,economic Application Used for live concert, exhibition, fashion show, school, outdoor events and so on. Hang lighting,banner, LED screen, speaker, sound and so on Aluminum Alloy Square Truss Stage Lighting Truss Systems 0 Why choose LEDIKA Truss ? 1. 22-year's experience in truss and stage industry. 2. Customers from more than 155 countries. 3. We are manufacture, can offer you lower price. 4. Professional engineers offer technical support to customers. 5. 24hours online services from our professional foreign trade department. 6. All our raw material is from public company. 7. Our complete QC system can make sure every product with high quality. Aluminum Alloy Square Truss Stage Lighting Truss Systems 1 Aluminum Alloy Square Truss Stage Lighting Truss Systems 2 Aluminum Alloy Square Truss Stage Lighting Truss Systems 3 FAQ : Q: Does LEDIKA accept OEM/ODM service ? A: Yes , you can custom design or selected our design (OEM /ODM is high welcome) , our factory have professional design team and can do as your offered design . Q: How to get samples from LEDIKA? A: If you need samples for quality check , sample fees should be charged from buyer . B. Free sample are available when order confirmed. C. Most of the sample fees will be returned to you when order confirmed. Q: What is the delivery time ? A: 7-15 days for batch goods regular size truss are in stock . Urgent order is also available. Q: What is your trade terms? A: Our trade terms are Ex-work , FOB & CIF Q: Where is your factory and how can I visit your company ? A: Ledika is a professional manufacturer in stage equipment, located in Nansha ,Guangzhou ,GuangDong , China . Warmly welcome you come to visit our factory . Q: What advantage do you have to make me choose LEDIKA stage truss ? A: We are a true factory & specialized in producing aluminum truss & other performance equipment more than 13 years . Humanist ans innovation are our base to develop, and we offer the best sale service for you .

Geogrid is widely used to reinforce soils and other materials in construction applications such as retaining walls, foundation soil and pavement construction, etc.  Typical geogrids include uniaxial and biaxial geogrid with raw materials e.g. Plastic ( PP/PE ), Polyester, Fiberglass, Steel-plastic, and laminate with non-woven geotextile. Application of Geogrids • Improve roadbed bearing capacity and prolong roadbed life; • Prevent road collapse and crack, keeping the ground neat; • Reinforce soil slope and prevent soil erosion; • Support slope planting mat for landscaping; • Replace metal mesh used in coal mine.

Geotextile is usually made from a synthetic polymer such as polypropylene (PP), polyester (PET) etc. raw material and processed by woven & needle punched non woven methods. It is used as protection, filtration, reinforcement, drainage, stabilization and separation layer alternative to diverse terrain such as soil, rock, sand and so on, also the UV Resistance and Thermal Bonded etc. performance is available. Nonwoven and Woven Geotextiles refers to a permeable synthetic textile material. Generally it is produced from polyester or polypropylene polymers. Geotextiles are used to increase soil stability, provide erosion control or aid in drainage. As the professional geotextile fabric manufacturer and supplier in China, we could produce non woven geotextile fabric including: polyester (PET) staple fiber geotextile, polypropylene (PP) staple fiber geotextile, polyester (PET) continuous filament geotextile, polypropylene (PP) continuous filament geotextile. As well as the Woven Geotextile including: Flat yarn geotextile, Split yarn geotextile, Filament woven geotextile, Weed mat.

Woven geotextile fabric is usually made from a synthetic polymer such as polypropylene (PP), polyester (PET) etc. raw material and processed by woven & needle punched non woven methods. Geotextile is used as protection, filtration, reinforcement, drainage, stabilization and separation layer alternative to diverse terrain such as soil, rock, sand and so on, also the UV Resistance and Thermal Bonded etc. performance is available. Nonwoven and Woven Geotextiles refers to a permeable synthetic textile material. Generally it is produced from polyester or polypropylene polymers. Geotextiles are used to increase soil stability, provide erosion control or aid in drainage. As the professional geotextile fabric manufacturer and supplier in China, we could produce non woven geotextile fabric including: polyester (PET) staple fiber geotextile, polypropylene (PP) staple fiber geotextile, polyester (PET) continuous filament geotextile, polypropylene (PP) continuous filament geotextile. As well as the Woven Geotextile including: Flat yarn geotextile, Split yarn geotextile, Filament woven geotextile, Weed mat.

Geomembrane, also named as Geomembrane Liner, is an essentially impermeable membrane used with foundation, soil, rock earth or any other geotechnical engineering material as an integral part of a man made project, structure, or system. As the professional Geomembrane manufacturer and supplier in China, we could meet all kinds of different quality standards including GRI GM13/GM17 ASTM Standard. According to the product appearance, the main geomembrane products including Smooth and Textured Geomembrane, while based upon the raw material category they could also be name as the HDPE/ LDPE/ LLDPE/ PVC/ EVA Geomembrane. HDPE is an excellent product for large applications that require UV and Ozone resistance, chemical resistance or high-quality installations. HDPE offers the most cost effective liner for large projects. 

The close nipple pipe fitting has male National Pipe Taper (NPT) threaded connections. This close nipple fitting is a section of threaded pipe used to create a close fit between two connecting pipes. It has male NPT threads for connecting to female threaded pipes, creating a tighter seal than straight threads. The operating temperatures are for this fitting range from -53 to 121 degrees C (-65 to 250 degrees F). Typical Application: Grease, refrigeration, instrumentation and hydraulic systems. Fuel, LP and natural gas available on special order

Minimum Order: 1000

Box Girder Bridge for Overpass And Expressway Bridge, as an increasingly important transportation facility, gradually developed from the original period, from naturally fallen trees, naturally formed stone beams or arches, to later man-made wooden bridges, stone bridges, materials are increasingly advanced. Especially steel bridge, although only more than 200 years of development history, but because of its own characteristics Introduction   S , teel beam Bridges include steel beam bridge and steel truss bridges of simply supported or continuous system. Steel girder bridges are generally processed in factories and constructed on site. There are many construction methods, including the whole hole hoisting method, bracket assembling method, cable hoisting method, turning method, pushing method, dragging method and cantilever assembling method.   Steel box girder, also called steel plate box girder, is a common structural form of long span Bridges. It is generally used on Bridges with large spans. Steel box girder bridge is more and more frequently used in highway Bridges, especially in urban overpasses and cross-line Bridges. There are mainly single box girder bridge, double box girder bridge and multi-box girder bridge. The steel box girder is generally made up of the top plate, bottom plate, web, diaphragm plate, mediastinum plate and stiffening rib, etc., which are connected by all-welding method. Advantages of steel bridge   1) Great spanning ability Because of the high strength of steel, and then under the same bearing capacity conditions, compared with the reinforced concrete bridge, steel bridge component section is smaller, so the steel bridge weight is light, more suitable for the construction of large-span bridge.   2) Suitable for industrial manufacturing.  Steel bridge components are generally manufactured in specialized factories by professional equipment, not limited by the season, processing and manufacturing speed, high precision, quality is easy to control.   3) Easy to transport Due to the light weight of steel bridge components, especially in the mountainous areas with inconvenient traffic, steel bridge is more convenient for automobile transportation   4) Erection fast Steel bridge members are easy to cantilever construction method assembly, complete sets of equipment available, assembly process mature.   5)Steel bridge members are easy to repair and replace The steel used in the main structure of steel bridge is mainly carbon steel and low alloy steel. Steel plates are the most commonly used in modern steel Bridges. Materials for steel bridge will go through many machining processes and welding processes, then make the bridge to be able to withstand a large static, dynamic load and impact load. Therefore, the steel materials used for Bridges should not only meet the requirements of manufacturing process, but also meet the requirements of use.

Free Design Prefabricated Structure Steel Industrial Workshop The steel structure building has widely usage, such as warehouse, workshop, factory, supermarkets, shopping malls, garages, crop warehouses, poultry houses, cow sheds, etc. It can realize large span and space for different application. Its properties of fast assembling, stability, durability can help customers to save cost. We are always concentrating on providing integrated steel structure building solutions for different kinds of customer. Our main products are building steel structure, prefabricated steel structure, bridge steel structure, long-span structure, truss frame structure and container house, etc., the annual output can reach 80,000 tons. Specifications of Steel Structure Industrial Workshop Main frame Q345, Q235, Q345B, Q235B etc section steel Column & Beam Welded or Hot rolled H-section Purlin Galvanized steel C/Z type purlin Roof and wall (Different Options) a) Color-coated corrugated steel sheet; b) Sandwich panel (EPS/ rock wool/ glass wool) c) Wire mesh + insulation glass wool roll + corrugated steel sheet d) Skylight panel is used for day lighting e) Other materials as customers’ requirement Surface of structure Hot dip galvanized or anti-corrosion painting Window PVC or Aluminum Alloy Door Sliding Door, Rolling door, single door Connection Bolt connection and welding connection Configuration and accessories Tie bar, brace, screws, bolts and so on Crane 5MT, 10MT, 15MT and more Packing Standard seaworthy packaging or customized Advantages of Steel Structure Frame Construction   1. Steel is lighter than wood and concrete Compared with concrete and wood, the ratio of steel’s density and yield strength is relatively low, so under the same stress condition, the section of steel structure is small, light weight, easy to transport and installation, suitable for large span, high height, load bearing structure.   2. Steel is durability The steel has good ductility, uniform material and high structural reliability. Steel structures' almost unrivaled ability to withstand high winds, heavy snow loads, fire and seismic activities, combined with their resistance to pests and decay, the service life of the structure can generally reach more than 50 years.   3. You can build faster with steel Steel parts are pre-fabricated to a specific design inside the manufacturing plant and are shipped out, ready to be erected. This speeds up construction time significantly, making it possible to complete large-scale projects in a matter of weeks.   4. Save money with steel The lighter-weight advantage reduces materials shipping costs, and can also simplify the design of a building's foundation and other structural support systems, which can further reduce project budgets. Faster construction means decreasing the labor and time cost.   5. Steel is incredibly versatile The steel structure building is widely used, such as warehouse, workshop, factory and other industrial buildings; Residential buildings, supermarkets, shopping malls, garages and other civil buildings; Agricultural buildings such as crop warehouses, poultry houses and cow sheds; Hospitals, hotels, schools and other social buildings; Railway bridge, river bridge, pedestrian bridge and other steel structure bridges.   6. It's environmentally friendly Removing steel structures produces little construction waste, the steel can be recycled. And it’s low carbon and energy efficient.

Product Features: Brass Collet Buna N O-ring Stainless Steel Tube Support Meets D.O.T. FMVSS571.106 Meets SAE J2494 & SAE J2494-3 Markets: Heavy Duty Truck Trailer Mobile Applications: Air Brakes Air Tanks Air Ride Sliders Tire Inflation Primary & SecondaryAir Lines Compatible Tubing: SAE J844 Type A & B nylon tubing Reference Part No: AQ62DOT - 62PMT - 1862 - DQ62DOT - 1562-DOT

Minimum Order: 1000