Recycling

Electrolytic Copper Grade A (LME standards), Cu purity 99.97-99.99% ELEMENTS VALUE Cu≥ 99.99% As≤ 0.0015% Sb≤ 0.0015% Bi≤ 0.0005% Fe≤ 0.0025% Pb≤ 0.002% Sn≤ 0.001% Ni≤ 0.002% Zn≤ 0.002% S≤ 0.0025% P≤ 0.001% PACKING DETAILS: Size : 914mm x914mm x 12mm Weight of each sheet: 125Kg +/-1 Packing: Palletized Banded by a Aluminum Bands Net Weight of each Pallet: 2M/T +/- 1 Min. Weight in each Container: 20M/T Approx. Gross Weight of each Container: 22.2M/T Approx.

Minimum Order: 50000

HMS 1 : 80% as per ISRI CODE 200 –202 HMS 2 : 20% as per ISRI CODE 203 – 206 Casting loss than 5% in total quantity. Descriptions and Specifications: The Chemical Composition of the steel scrap: International Standards as follows: MN - 0.60 1.05 C - 0.54 0.82 Si - 0.18 - 0.12 S - 0.04 Max P - 0.035 Max As - 0.01% Max of Mass Share Cr - Residual.

Minimum Order: 50000

SPECIFICATION MATERIAL: ISRI Code (27/29) R50 (51.67 Kg/Meter – GOST 7173-75) ISRI Code (27/29) R65 (64.72 Kg/Meter – GOST 8165-75) Composition: C: 0.54%- 0.82%, Si: 0.18%-0.40%, Mn: 0.60%-1.05%, S: 0.04% Max,P: 0.035% Max, As: 0.01% Max of Mass Share. Length: between 6-12 m (min.) to 12 meters (max) not exciding 12 meters COMPOSITION: METAL IMPURITIES TOTAL 1% (ONE PERCENT) OR LESS.All goods sold by the seller will be totally free of anytypes of radiation, bombs, arms and ammunition, mines,shells, cartridges, sealed containers, penguins, gas cylinders, explosive shells and/or explosive materials in and form, used or otherwise. contact us for more details.

Minimum Order: 50000

Graphite particles mainly come from the debris generated during the machining of graphite electrodes and the waste products generated by the graphite chemical process, so as to have some waste stone ink blocks. Because graphite chips have the characteristics of conductivity, heat conduction, high- temperature resistance, low ash, high carbon content, and good chemical stability, they are widely used as carburizing agents in steel-making furnaces, reducing agent in the chemical industry, and as one of the important raw materials for the production of carbon blocks for aluminum. Application of Graphite Particle 01 In other aspects, different graphite powder particle size can be used as mold coatings, pencils, batteries, electrodes, anti-radiation materials, etc. 02 Refractory: in the metallurgical industry, graphite particles are used to make crucibles to smelt non-ferrous, special steel, and other precious metals. In addition, graphite particles are also used as a heat preservation agents for steel-making and pouring ingots, protective slag, and ladle covering agents. 03 Conductive materials: in the electrical industry, graphite particles can be used as electrodes, brushes, electric rods, carbon tubes, picture tubes, and vacuum tube coatings. 04 Wear-resistant materials and lubricants: graphite particles can be used as wear-resistant and lubricating materials in the machinery industry. If graphite can slide at the speed of 100M / s within the temperature range of - 200-2000 ℃, lubricating oil may not be used. Graphite lubricants include powder, colloidal graphite, graphite grease, graphite packing, etc. Characteristics of Graphite Particle The chemical composition of graphite particles is a carbon (c), which is soft and greasy. It has the characteristics of small specific gravity, high- temperature resistance, self-lubrication, high conductivity and heat conduction, strong wear resistance, strong stability, thermal shock resistance, and good plasticity. Therefore, it is widely used in metallurgy, machinery, petroleum, chemical industry, light industry, national defense, and other fields. As one of the most reliable high purity graphite manufacturers, Zhongtai graphite provides graphite raw material, graphite sealing ring, high purity graphite powder, carbon graphite composite material and etc. Want to know more? Please contact us.