Other Steel

P20 steel round bar sheet plate has many excellent properties. In the pre- hardened status, the mold can be processed without any heat treatment. Which cut down the running period and improves efficiency. After it has been processed through the forged, 1.2311 steel becomes dense. Then it can pass 100% ultrasonic test. And after the test, there will be no pores left and no defect. And it also is called DIN 1.2311 and SCM4 steel. P20 Steel Application P20 steel is used to make thermoplastic molds, extrusion dies, injection molds and die casting dies. And can also be used to make main components of heavy- duty mold. In addition, it also be used to produce cold structural parts, TV cases, washing machines, inner casings of refrigerator and buckets. Of course, 1.2311 steel can also be used to make bumper dies for automobiles or structural components of cars. 1.2311 steel has very good hardness and plasticity. So it can be used to make a variety of molds. The Method of Use 1.2311 steel has been pre-hardened to 285-330HB(30-36HRC), which can be used directly for mold making and process. It also has the characteristics of good dimensional stability. Just Pre-hardened steel can meet the needs of the industry. The die life can reach 50W mode times. What SongshunSteel Provide Our main products are round and flat bars for alloy steel, tool steel, stainless steel, spring steel, bearing steel and etc. In those years we offers a wide range of high quality steel for engineering machinery, mold tooling, cutting tools manufacturing industry and etc. E-mail:jacklu@songshunsteel.com Skype/W , hatsapp/Wechat:+86-18269260283 Songshun Tiktok:songshunsteelfactory Songshun Facebook:Songshun Steel Songshun Twitter:Songshun Steel Songshun YouTube:SONGSHUN STEEL Songshun Company Website: https://songshunsteel.com/ songshun , steel414043401

Minimum Order: 1 bags

P20+Ni steel also can be called DIN 1.2738 steel. It has great mechanical property and processability. And it is great choice for the production of the hot work mold base. It always is used for plastic mold base. By the way, the special preheat will make it get better hardness after the production fished on the factory. That will increase the productivity effect of the mold base, make the business get better. 1.2738 Steel Round Bar Physical Properties 1.Temperature: 20℃/200℃/400℃; density: 7. 8g/cm³/7.75g/cm³/7. 7g/cm³ 2.Temperature: 20℃/200℃/20-400℃; Coefficient of Linear Thermal Expansion: 12.6 ×10K/13.5×10K 3.Temperature: 20℃/200℃/400℃; Coefficient of thermal conductivity: 29.0W·(m·K)/29.5W·(m·K)/31.0W·(m·K) < , br>4.Temperature: 20℃/200℃/400℃; Elastic Modulus: 205000MPa/200000MPa/185000MPa P20+Ni Steel Plate Mechanical Properties 1.Temperature: 20℃/200℃/400℃; Tensile strength: 1100MPa/1050MP8/850MPa 2.Temperature: 20℃/200℃/400℃; Yield strength: 980MPa/925MPa/770MPa 3.Temperature: 20℃/200℃/400℃; Section shrinkage: 49%/51%/52% 4.Temperature: 20℃/200℃/400℃; Elongation: 13%/14%/16% 5.Temperature: 20℃/200℃/400℃; Impact toughness (≥) 20J/cm/32J/cm/42J/cm Songshun specialized in Special Steel for almost 20 years. We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.Welcome your contact 24 hours a day!!! Songshun Company Website: https://songshunsteel.com/ songshunsteel414 , 043401

Minimum Order: 1 bags

1.2312 steel material is a great plastic mold steel in the industry. 1.2312 (40CrMnMoS8-6) belongs to the stand of alloy tool steel of DIN. And many people also call it as 2312 steel. It’s polishing property and machinability are good. And the hardness of everywhere is average with high wear resistance. DIN 1.2312 steel material usually be used in the blowing mould, structural parts, forming tools, injection mold due to the good hardness, high-temperature strength and mechanical property. DIN 1.2312 Steel Application DIN 1.2312 steel is a general-purpose low-alloy tool steel, mainly used for large plastic molds and mold bases, such as car bumpers, TV housing mold shells, etc., and also used for tool holders, die-casting low-point metal mold materials, assembly parts , forming frames, fixtures, base plates, hydroforming tools, and more. 1.2312 Steel Characteristics It is easy to get the homogeneous hardness throughout the section for big dimension blocks. Good polishability, good toughness on the surface. Delivered in Pre-hardening condition, used directly for making molds, that can guarantee good usability and avoid the deformation in heat treatment. Songshun specialized in Special Steel for almost 20 years. We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.Welcome your contact 24 hours a day!!! E-mail:jacklu@songshunsteel.com Skype , /Whatsapp/Wechat:+86-18269260283 Songshun Tiktok:songshunsteelfactory Songshun Facebook:Songshun Steel Songshun Twitter:Songshun Steel Songshun YouTube:SONGSHUN STEEL Songshun Company Website: https://songshunsteel.com/ songshun , steel414043401

Minimum Order: 1 bags

Product Description: Galvanized Steel Metal PVC coated 3D V Bending Welded Curved Garden Wire Mesh is strong yet lightweight, making it suitable for many fencing needs. It typically features a Hot-dipped galvanized, PVC coated, or powder coated finish for optimal corrosion and rust resistance. This 3D bending or curved welded fencing fence is an ideal choice for both residential and commercial use due to its aesthetic appeal. The Welded wire fence panel offers several noteworthy benefits. For one, it is highly resistant to corrosion, with a service life of up to 10 years of protection from corrosion damage. It is also relatively easy to install: two people are normally enough for the whole process. Additionally, the welded mesh has a neat and tidy look with a flat mesh surface and a high view. Features: Product Name: Heavy Gauge 3D Galvanized Steel Welded Curved PVC Coated 3D Wire Mesh Fence Panel Panel Sizes: 1.5*2.5m, 2*2.5m, 2*2.4m Material: Low Carbon Steel Wire, galvanized Wire Wire Diameter: 3mm-6mm Application: Garden, Park, School, Factory Panel Width: 2.0m-3.0m Powder Coated Welded Metal Curved 3D Triangle V Mesh Security Mesh Panel Fence Hot dipped galvanized wholesaler garden fence panel Technical Parameters: Parameter Details Panel Sizes 1.5*2.5m,2*2.5m,2*2.4m Material Low Carbon Steel Wire,galvanized Wire Application Garden, Park, School, Factory Frame Finishing Galvanized Or Powder Coated,PVCcoated Color RAL 6005 Green, RAL 7016 Gray, All RAL Color Can Be Customized Panel Height 0.6-3.0m Panel Width 2.0m-3.0m Frame Pipe 25mm Wire Diameter 3mm-6mm Mesh Size 50mm * 50mm, 50*100mm, 50*150mm, 50*200mm, 55*200mm Product Welded wire mesh fence panel, PVC Welded Galvanized Iron Wire Mesh Panel 3d Garden Perimeter Fencing, Galvanized or pvc coated Curvy Welded Wire Fence 3d wire mesh fence panel Applications: Steel metal security welded wire mesh fence panels are a popular choice for perimeter protection. They can be used for a variety of different purposes, such as in realty, villages, gardens, schools, hospitals, construction gigs, playgrounds, factories, airports, military matters, prisons, highways and railways. These panels offer strong and sturdy protection, their galvanised steel network providing a wealth of security for any area. Not only do these steel mesh fences provide excellent safety and protection, they also have a visually appealing aesthetic that will look great in any environment. Packing and Shipping: Packaging and Shipping Welded Mesh Fencing is packaged in rolls of various widths and lengths, and shipped in secure and waterproof boxes or containers. The packaging also includes a detailed installation guide and all the necessary hardware and accessories to ensure the product is installed correctly.

s50c, is a high quality medium carbon steel, the use of electric furnace, open furnace or pure oxygen converter steelmaking process of all static steel, with the characteristics of uniform microstructure. The steel carbon content (mass fraction, %) ≥0.4, excellent wear resistance, ductility reduction, quenching easy deformation and cracking, so quenching is extremely important, must be cooled after cutting and tempering to avoid tempering brittleness. The machinability of this kind of carbon steel can be improved by spheroidizing treatment. The steel is usually used after tempering to a hardness of 19~22HRC to increase its cutting performance.

Minimum Order: 1 bags

Product Description: SS 310 Refractory Anchors are heat resistant fasteners that provide securement and protection from corrosive materials. Manufactured with a low carbon content of ≤0.08%, these resistant securement devices are composed of manganese (≤2.0%), silicon (≤1.5%), nickel (19-22%), and a melting temperature of 1410-1415℃. SS 310 Refractory Anchors are designed to withstand extreme temperatures and are ideal for use in high-temperature environments. They provide superior protection and securement in a variety of corrosive and hazardous materials, making them the perfect choice for any application requiring heat and corrosion resistance. Features: Product Name: SS 310 Refractory Anchors P: ≤0.04% Cr: 24-26 S: ≤0.03% Ni: 19-22 C: ≤0.08% Stainless Steel Fasteners Corrosion Resistant Ties Technical Parameters: Property Value Name SS 310 Refractory Anchors Si ≤1.5% Cr 24-26 S ≤0.03% C ≤0.08% Mn ≤2.0% Ni 19-22 P ≤0.04% Melting Temperature 1410-1415℃ Specialty Stainless Steel Fasteners, Stainless Steel Anchors, Heat Resistant Anchors Applications: FALTHFUL SS 310 Refractory Anchors are stainless steel fasteners that are designed with heat resistance and durability in mind. Made with high- quality Mn ≤2.0%, C ≤0.08%, P ≤0.04%, and Ni 19-22, these fasteners can withstand temperatures up to 1410-1415℃. It is the perfect choice for applications that require fasteners to stand up to extreme temperatures. With a minimum order quantity of 500KGS, FALTHFUL SS 310 Refractory Anchors come in a wooden package, ensuring safe delivery and storage. FALTHFUL provides fast delivery, allowing customers to receive their orders within 25 days, and flexible payment terms such as L/C and T/T. With a supply capacity of 20TON/25DAYS, FALTHFUL SS 310 Refractory Anchors are the perfect choice for any heat-resistant fastening needs. Packing and Shipping: Packaging and Shipping of SS 310 Refractory Anchors: SS 310 Refractory Anchors are shipped in a well packaged box with cardboard. The box is sealed with tape with the SS 310 Refractory Anchor logo printed on it. The box is then placed in a larger box or carton for safe delivery. The delivery includes a tracking number and insurance.

The triangular bending guardrail net is made of high-quality Q 235 low carbon cold drawn steel wire, cold drawn low carbon steel wire and low carbon steel wire. And carry out the corresponding anti-corrosion treatment: electric galvanizing, hot dip galvanizing, spraying, dipping and stainless steel wire, etc. (generally using dipping treatment). Triangular bending guardrail net features: woven welding bending, commonly used peach column connection is also called peach column guardrail net. It has the characteristics of beautiful and durable mesh structure, wide vision, variety of colors, high strength, good steel and beautiful shape. It plays both the role of guardrail and beautification. The triangular bending guardrail net is made of high-quality Q 235 low carbon cold drawn steel wire, cold drawn low carbon steel wire and low carbon steel wire. And carry out the corresponding anti-corrosion treatment: electric galvanizing, hot dip galvanizing, spraying, dipping and stainless steel wire, etc. (generally using dipping treatment). Triangular bending guardrail net features: woven welding bending, commonly used peach column connection is also called peach column guardrail net.

Workshop isolation net is a kind of movable guardrail net product used for temporary isolation of workshop area. Can choose bilateral type, frame type, bending type guardrail net. The product has the advantages of simple installation, convenient removal, high protection strength, good rigidity, beautiful appearance, broad vision, bright and relaxed feeling. Workshop isolation net after dipping plastic, galvanized anti-corrosion treatment with anti-corrosion, anti-aging characteristics. Its products are mainly used indoors, there is no light, so the service life is longer than other guardrail products. Can be processed according to customer requirements. Our company stock supply height of 1.2 meters, 1.5 meters, 1.8 meters and 2 meters, 2.5 meters, 3 meters, 4 meters. The selected metal raw materials are relatively simple to be disturbed by external factors, so the health condition of the workshop is very important, and if the dust is relatively large, we should pay attention not to let the dust fly. If the dust falls on the workshop, it should be cleaned in time. Under normal circumstances, the service life of the workshop barrier net is relatively long. However, if you do not pay attention to the maintenance of its original life when it is usually used, it is difficult to reach. So, about this kind of workshop equipment to carry out reasonable maintenance? The selected metal raw materials are relatively simple to be disturbed by external factors, so the health condition of the workshop is very important, and if the dust is relatively large, we should pay attention not to let the dust fly. If the dust falls on the workshop, it should be cleaned in time, because the impurities in the dust will make the paint outside the net fall, which will make the net wire corroded faster. If it is damaged, it is necessary to replace the new metal material and weld it well in time to avoid the gradual expansion of the scale of the damaged place, thus affecting the use of the entire barrier network. If the above oil can not be cleaned with ordinary water, it can be scrubbed with dishwashing liquid. The company mainly deals in color-coated, galvanized, stainless steel pipes, stainless steel coils, stainless steel plates of various materials; hot-rolled series of rebar, medium and heavy plates, coils, I-beams, angle steels, channel steels, H-beams and other steel products and deep processing Service. (The company’s annual inventory is more than 50,000 tons).The company adheres to the concept of “integrity first, service-oriented”, relying on the strong strength of major domestic steel groups, exerting the company’s strong resource integration capabilities, and serving and satisfying the needs of customers both in China and at abroad.Additionally, Zhishang Steel also has a powerful and professional logistics distribution system, which can provide customers with efficient, fast and flexible logistics services at any time.Our business covers Southeast Asia, the Middle East, Africa, Australia, Europe, the United States and other countries.Looking forward to the future, in order to maintain in-depth and stable cooperation with customers both at home and abroad, all employees of Zhishang Steel will work harder to provide Better products and services to create more added value for customers.

Minimum Order: 1 bags

H-beams and I-beams are beams made of structural steel extensively used in construction applications. They are commonly used in building homes, bridges, large trailers, etc., due to the high strength imparted by them and the ease of construction.

Minimum Order: 1 bags

Generally, steel box girder is connected by the top plate, bottom plate, web plate, diaphragm, mediastinum plate and stiffener through all welding. The top plate is an orthotropic bridge panel composed of a cover plate and a longitudinal stiffener. The thickness of each plate of a typical steel box girder can be: the thickness of the cover plate is 14mm, the thickness of the longitudinal U-shaped rib is 8mm, the width of the upper mouth is 300mm, the width of the lower mouth is 170mm, the height is 280mm, and the spacing is 620mm. The bottom plate is 10mm thick, and the longitudinal U-shaped stiffener ribs; Oblique web thickness 14mm, middle web thickness 9mm; Diaphragm spacing 4.0m, thickness 12mm; Beam height 2 ~ 3.5m. Steel box beam is a common structural form used in engineering. In order to study the influence of diaphragms spacing on the distortion of simply supported steel box girder under concentrated load, the distortion effect and rigid torsion effect of simply supported steel box girder with different number of diaphragms were compared under concentrated load, and the curve of maximum distortion effect with the number of diaphragms was obtained. The concentrated load is applied to the top of the box girder web, and the load decomposition method is used to calculate the four working conditions: distortion, rigid torsion, symmetrical bending and eccentric load.

Minimum Order: 1 bags

PRODUCT DESCRIPTION Cold Rolled SS Checkered Plate 201 304 1100mm 1800mm Product Name Factory Supply Mild Carbon Steel MS 2mm 3mm 6mm 8mm SS400 Checkered Steel Plate Sheet Steel Grade Q235, Q345, SS400, ASTM A36, ASTM A500 (Gr. A, B, C, D), ASTM A252 (Gr.2, 3), ASTM A572 Gr.50, ASTM A283, S235JR, S275JR, S355JR, S355J2H, S355JOH and so on. Standard JIS, AiSi, ASTM, GB, DIN, EN Length 6000mm, 12000mm or as per your request Thickness 1.5~16mm Width 1000m , m, 1200mm, 1219mm, 1250mm, 1500mm, 1800mm, 2000mm, 2200mm, 2400mm, 2500mm, 3000mm or as per your request Processing Service Bending, Welding, Decoiling, Punching, Cutting Payment Term 30%T/T Advance + 70% Balance payment Surface Treatment Black, Oiled, Painted, Galvanized and so on Packing Standard Sea-worthy Packing Notice The sizes or thicknesses of stainless steel plate can be customized, if you need additional information,please don’t hesitate to contact us at any time. Product name Factory wholesale 201 202 316 410 409 430 321 304 4x8 Stainless steel plate/sheet Surface No.1, 2B, BA, 8K Mirror, No.4,Hairline,Satin,Embossed,Brush,Matt Pvc Film,Laser Film.Perforated,Galvanized Thickness Cold rolled 0.3 to 3mm Hot rolled 3mm to 60mm or as customer's request Width 1000mm,1219mm,1500mm,1800mm,20 , 00mm or as customer's needs Length 2000mm-6000mm or as customer request Brand TISCO,BAOSTEEL,POSCO(ZPSS) ,POSCO, etc. Feature corrosion resistance, heat resistance Sizes standard size and other size as your requirement support Standard GB, AISI, ASTM, ASME, EN, BS, DIN, JIS Certificate SGS,BV,IQI,TUV,ISO,etc Grade 201.202.301.302.304.304L.304F,309S,31 , 0,310S,316,316L,321,430,430F,420,420J1,410s,.6 , 30.631,904L 2205.2507,2520ect. Package Standard export sea-worthy packing or customized Delivery time Within 5- 7 working days, according to customers' quantities Payment L/C or T/T About us Wuxi Screw Metal Products Co., Ltd. is a professional manufacturer with more than 20 years of experience in manufacturing stainless steel and carbon steel from 2001. Our location is in Wuxi - the largest stainless-steel processing center in China. Our company has its own factory, it provides a one-touch service for cutting, forming and surface processing of stainless steel products. and it's high-end professional processing equipments from domestic and international such as Italian Nova stainless steel leveling production line,Taiwan Weitai stainless steel transverse shear line,Taiwan Weitai stainless steel longitudinal shear line,large stainless steel cold and hot rolling leveling machine/slitting machine; And other large-scale CNC processing equipment. Since its establishment, the company has been expanding in scale with stable and sustainable operation with integrated trade, processing, warehousing and distribution capabilities. Our company is the first- level agent designated by TISCO,ZPSS,ESS(Eastern special steel),Bao steel,etc so our products is of quality,lead time is flexible,cost effectiveness, it is very competitive to best maximize customers benefits. Mainly avalable material and grades include: 200series,304,304L,309,309L,310,310S,316,316L, , 316Ti,321,2205,2507,440,440c,904,904L with sample stock available throughout the year. We would like to express our heartfelt thanks to these customers who care and support our company. We hope to establish long-term cooperation relationship with you. Faq Q: Are you a factory or a trader? A: Wuxi Screw Metal Products Co., Ltd. was established in 2001. It is a leading domestic steel industry and a leading high-end manufacturing supporting service company. We've gained our Export Right and become an integrated company of industry and trade in order to satisfy buyer's multi-request on different material and products. A: We have many professionals, technical personnel, more competitive prices and best after-dales service than other steel companies. Q: How to get samples? A5: FREE samples are available for your checking and testing. And to get free samples, you need to send us you detailed receiving address (including post code) and your DHL/FedEx/UPS account for collecting samples, courier cost will be paid in your side. Q: How long does it take to get the product if I place an order? A: With the process of your requirements, we will pack and deliver in 3-7 days. If it is by sea shipment, it will take 15-45 daysdepending on different locations. Q: How about samples? A: free Q: Minimum order quantity? A: MOQ is 1 tons. Q: What kind of terms of payment? A: T/T, L/C, Western Union,PayPal are available. Q: Can you do customization & reproduction if I provide a photo? A: Yes. Q. How do you control the quality? A: Factory test certification is provided with the shipment, and third-party inspection can be provided. We have also obtained ISO, SGS, and certification. Q: What are the main products of your company? A: Our main products are carbon steel coils/plates, galvanized steel coils/plates, stainless steel coils/plates, copper plates, copper pipes, steel wires, round/square pipes, bars, channel steel, etc.

Galvanized coil, the thin steel plate is immersed in the melting zinc tank, so that the surface of the thin steel plate with a layer of zinc. The main use of continuous galvanizing process production, that is, the rolling steel plate is continuously immersed in the melting zinc plating tank made of galvanized steel plate; Alloyed galvanized steel sheet.

Minimum Order: 1 bags

BS DIN Bright Round Bar Hot Rolled For Parts Bright round steel is typically a carbon steel alloy that improves surface condition by drawing, stripping, or grinding hot-rolled surface treatments provided by steel mills. Realized benefits include improved machining, reduced waste during the production phase of the component, enhanced physical and mechanical properties as well as improved dimensional tolerances and straightness, and reduced subsequent machining costs. AISI/SAE DIN/EN BS JIS/KS China 1015 C15 / 1.0401 080M15 S15C 15# 1018 S17C 18# 1020 C22 / 1.0402 070M20 / EN3 S20C 20# 1025 C25 / 1.0406 070M26 S25C 25# 1030 C30 / 1.0528 080M32 / EN5 S30C 30# 1035 C35 / 1.1181 070M36 S35C 35# 1040 C40 / 1.0511 080M40 / EN8 S40C 40# 1045 C45 / 1.1191 080M46 S45C 45# 1050 C50 / 1.0540 080M50 S50C 50# 1055 C55 / 1.0535 070M55 / EN9 S55C 55# 1060 C60 / 1.1221 070M60 S58C 60# 070M20 Hot Rolled Alloy Steel Round Bars Suppliers For Parts BS DIN Solid Round Rod Finish 0 Who we are? Wuxi Zhanlu International Trade Co., Ltd.: located in China's steel resources are very rich in East China - Wuxi, is a professional operation and sales to U special steel, mold steel and stainless steel-based, set steel trade, logistics, warehousing in one of the integrated import and export steel trading enterprises, the company pursues the "quality is life, service is the soul" business philosophy, with a complete variety and small profits and high sales of the principle, products are exported: China, Europe, the United States, Japan and South Korea, Southeast Asia and Africa and other countries, marketing throughout the world, At the same time, it also provides procurement services for the Chinese purchasing agents of many international companies, and effectively solves the customer's problem by providing rich inventory and strong supply sources Various procurement needs have won the trust of our customers.

Oil Filter Black Plastic Spray Filter Epoxy Resin Net Black Spray Plastic Wire Mesh Epoxy resin coated mesh is made of barbed wire mesh, aluminum alloy mesh or stainless steel mesh coated with epoxy resin powder electrostatically sprayed. It is mostly used to make support carriers for hydraulic filters and air filters, and some are also used for door and window protection. As a new product developed by the company, it can replace traditional woven mesh in many fields, including stainless steel wire mesh and galvanized mesh. Epoxy mesh has three advantages of economy, environmental protection and durability. Carbon Steel Expoxy Coated Wire Mesh Material Carbon Steel Wire Thickness 0.18mm Mesh Count 18x14mesh Roll Width 0.914m/1m/1.2m/1.4m/1.6m/1.8m/2.6m Roll Size 1.0m*30m/50m/100m/300m, 1.22m*30.5m/50m/100m/300m Black Plastic Epoxy Coated Carbon Steel Wire Mesh Roll 0.914m 1m High Durability 0 Black Plastic Epoxy Coated Carbon Steel Wire Mesh Roll 0.914m 1m High Durability 1 Black Plastic Epoxy Coated Carbon Steel Wire Mesh Roll 0.914m 1m High Durability 2 Black Plastic Epoxy Coated Carbon Steel Wire Mesh Roll 0.914m 1m High Durability 3