Excess Inventory

Max capacity 15/30KG Fashionable appearance Support bulk import PLU by USB 112 hot keys and 10000 PLU Thermal label and receipt printing software provided

Minimum Order: 1 bags

OIML/NTEP/CE certified Drawable printer, convenient paper loading Can store up to 10000 PLU, 112*2 Hotkeys Max capacity 15/30KG High label and receipt printing speed

Minimum Order: 1 bags

High accuracy and stability Support label and receipt printing Water-proof, insect-proof and dust-proof design Convenient paper loading operation All size supermarkets, convenience stores, deli's, farmers' markets... Max capacity 15/30KG

Minimum Order: 1 bags

Air Damper RD-V118 Characteristics SOC Free, For Glove box, one-way Component Parts Less honorary seat: PC Upper cover: PC O-RING: Oil-emitting silicone Tie rod: PP Technical Requirements 1. Damping and Cushioning Direction: V - Unidirectional 2. Torque Testing Standard: 23±2°C, speed of 2400 r/min 3. Torque Range: 1.0-4.5 kgf.cm 4. Effective Damping Stroke: 60mm 5. Static High and Low-Temperature Requirement: -40°C to 90°C 6. Damping Durability Requirement: >20,000 cycles

Push Push Latch RD-08 Component Parts Less honorary seat: POM Lock cylinder: POM Deadbolt: POM Spring: stain , less steel Steel needle: stainless steel Technical Requirements 1. Storage Temperature: -40°C to 90°C, Operating Temperature: -35°C to +80°C. 2. At room temperature, the door lock operation pressing force should be 6N ±1. Insertion force into the opponent's mounting hole: ≤20N. Extraction force: ≥50N (subject to customer hole design). In the locked state, the clamping force applied to the opponent's component should be ≥20N. 3. Durability Requirements: (1) At room temperature, with the product initially in the locked position, wait for 0.5 seconds, then unlock. After unlocking, wait for 0.5 seconds. This constitutes one cycle of operation. The product should undergo more than 50,000 cycles of continuous testing without any functional failure. (2) At room temperature, under a continuous 6N load, follow the same steps as in (1) above, and the product should undergo more than 30,000 cycles of continuous testing without any functional failure.

Axial/Barre Damper RD-T138 Characteristics SOC Free, Screw, two-way, No angle limit Component Parts Less honorary seat: PC Upper cover: PC Rotor: POM O-RING: VMQ Oil:

Gear/Rotary Damper RD-T068/V068 Characteristics SOC Free, Screw, two-way, One-way,No angle limit Component Parts Less honorary seat: PC Upper cover: PC Rotor: POM Gear: POM O-RING: ,  VMQ Oil: silicone oil Durability Ambient temperature: normal temperature 23° Conditions: One rotation (1 turn) / 1s - pause / 1s - Reverse rotation (1 turn) / 1s - pause / 1s Lifetime: 30,000 times Technical Specifications Type 12 / / / Number of teeth 12 / / / Tooth width Product height 19 Module 1.05 / / / Pitch circle diameter Φ14.7 Pressure angle 20° / / / Material POM / / /

What are the main products of your company? We are a high-tech enterprise specializing in the research and development, production of diamond tool series, geological drilling series, and mining tool series. What is the production capacity of this factory? We have advanced production equipment and technology, capable of meeting the production requirements of different customers. Our production line is efficient and flexible, allowing for customized production according to order demands, ensuring timely delivery of high-quality products. Does this factory offer customized production services? Yes, we provide customized production services, tailoring diamond drills of various specifications, models, and designs according to customer needs and requirements. Our engineering team collaborates with customers to provide customized solutions and ensure products meet their expected requirements and standards. What is the delivery time of this factory? We prioritize customer needs and aim to complete order production and deliver products in the shortest possible time. The delivery time depends on the quantity, specifications, and customization requirements of orders. Typically, we negotiate with customers to meet their requested delivery times. How is the after-sales service of this factory? We value customer satisfaction and experience, providing comprehensive after- sales service support. If customers encounter any problems during use or require technical support, our after-sales team will respond promptly and provide solutions to ensure customer needs are met. Xingtai Hengchang Tools is a factory with over 30 years of experience specializing in the production of diamond tools. Our main products include diamond saw blades, diamond grinding discs, diamond drill bits, and other hardware tools. Our company supports customized services and welcomes your inquiries.

Minimum Order: 50

Product Description GBT 7kw Single Gun 4.3-Inch Screen 220V Wall EV Charger With Emergency Button Product Description User-Friendly Interface: Our wall-mounted EV charger features a 4.3-inch screen, providing a clear and intuitive interface for users to monitor and control the charging process conveniently. The screen displays essential charging information, making it easy for EV owners to track the progress of their charging sessions. Reliable Charging Solution: Operating at a standard 220V, our wall EV charger delivers a reliable and efficient charging solution for electric vehicles. It offers a stable power supply, ensuring consistent and safe charging experiences for EV owners. Enhanced Safety with Emergency Button: Our wall EV charger is equipped with an emergency button, prioritizing user safety. In case of an emergency or any unforeseen circumstances, users can quickly and easily press the emergency button to halt the charging process, ensuring immediate safety measures are in place. Specification Type GBT 7kw Single Gun 4.3-Inch Screen 220V Wall EV Charger With Emergency Button Operating temperature -20~50℃ Material Galvanized sheet Rated Output Current 32A Rated Output Voltage AC220V Power Type AC Degree of Protection IP54 Functiom RFID and LCD screen GBT 7kw Single Gun 4.3-Inch Screen 220V Wall EV Charger With Emergency Button 0GBT 7kw Single Gun 4.3-Inch Screen 220V Wall EV Charger With Emergency Button 1GBT 7kw Single Gun 4.3-Inch Screen 220V Wall EV Charger With Emergency Button 2 GBT 7kw Single Gun 4.3-Inch Screen 220V Wall EV Charger With Emergency Button 3 Features Extensive International Projects: Our electric vehicle charging station supplier has successfully completed numerous projects overseas, showcasing our experience and expertise in the global market. With a strong track record, we are well-equipped to handle diverse charging infrastructure requirements. Monthly Supply Capacity of 10,000 Units: Our manufacturing capabilities enable us to deliver a substantial volume of 10,000 charging stations per month. This high production capacity ensures that we can meet the demands of large-scale projects and fulfill customer orders promptly. Robust Research and Development (R&D) Capabilities: We boast a formidable R&D team that drives innovation in the electric vehicle charging industry. Our engineers and designers are committed to developing cutting-edge technologies and solutions, ensuring our charging stations remain at the forefront of the market. Multilingual After-Sales Support: We understand the importance of providing excellent customer service, and our after-sales support reflects this commitment. Our dedicated team is proficient in multiple languages, enabling effective communication and assistance for customers worldwide. Multiple Certification and Accreditation: Our charging stations undergo rigorous testing and meet various certification standards, ensuring their safety, quality, and compliance with industry regulations. We hold a range of certifications and accreditations, demonstrating our commitment to delivering reliable and certified charging solutions. Factory Introduction With 8 years of experience in the industry, we are a reputable manufacturer of EV charging products, specializing in OEM and ODM services. Our company is dedicated to providing high-quality charging solutions tailored to meet the unique requirements of our clients. We pride ourselves on our ability to deliver innovative and reliable charging equipment that adheres to the highest industry standards. As a trusted partner, we strive to exceed customer expectations by offering seamless integration, efficient performance, and exceptional customer support. Choose us for cutting-edge technology, expertise, and a commitment to sustainable electric vehicle charging solutions.

Flexible Metal Conduit Fitting EMI Proof Solution - BEZ05 Series（EU） Metal Conduit Fittings BEZ05 series is a four-piece swivel straight connector and has been designed to meet with IEC 60423 standard. The BEZ05 series is applied on the relay or end point of wiring system to connect metal conduits and junction box or enclosure for wiring extension and protection. The body is made of zinc alloy with RoHS compliance which is connected with metal flexible conduit by screwing in and covering with a nut and fixed to the knockouts of junction box or tapped entries by locknut with M type male thread system. The concise structure design is benefit for quick and convenient assembly and swivel structure enable quick and efficient installation but remains the feature of high tensile resistance at the mean time. For grounding purpose, an extra grounding ring is suggested to apply. This series of fitting is proposed to fit with metal flexible conduit series PEG13, PEG23, PES13 and PES23 with braiding which will offer excellent efficiency of EMI prove. Material：Zinc Alloy Temperature Range : -50℃~+200℃ IP Rating : IP 40 Surface Finish : Nickel plated, other treatments are available by consult. RoHS Compliance : Yes Certificate : CE Nominal Conduit Size Nominal Conduit Size PG Thread Part Number Package / Box (Pcs) Weight / Box (Kg) 12 5/16 M16x1.5 M16-BEZ05-12 600 17.3 16 3/8 M16x1.5 M16-BEZ05-16 400 14.2 20 1/2 M20x1.5 M20-BEZ05-20 320 15.7 25 3/4 M25x1.5 M25-BEZ05-25 200 14.8 32 1 M32x1.5 M32-BEZ05-32 100 12 40 1-1/4 M40x1.5 M40-BEZ05-40 50 9.5 50 1-1/2 M50x1.5 M50-BEZ05-50 40 10.6 63 2 M63x1.5 M63-BEZ05-63 30 10

Flexible Metal Conduit Water Proof -PAG13PU Series Product Description Waterproof Flexible Metal Conduit, PAG13PU series consists of galvanized steel square-lock flexible conduit and PU waterproof jacket which features with high mechanical characteristics, watertight, fire retardant and corrosion resistant for wire and cable protection. Full range of conduit size meets with the system normally used in Asia market. All materials are compliant with RoHS standard and the PU jacket contains no halogen. This series of product meets with BS EN 61386 standard and has been developed with 3 classified levels, Light, Medium & Heavy, to satisfy different requirements. Because of good chemical corrosion & high abrasion resistance and excellent flexibility under low temperature, the Flexible Waterproof Metal Conduit is the best solution for industrial areas with complex and severe environment conditions, railway system demanding high safety & reliability or machine industry. Recommend to have complete protection efficiency for whole wiring system by adopting fitting series AZ01, AZ05, AZ09, AZ11, GS50 & GS53. Material：Galvanized Steel + PU Jacket Profile：Square-lock Temperature Range: -40℃~+80℃ IP Rating: IP 40 (Fit with connector series: AZ01, AZ05) IP 65 (Fit with connector series: AZ09, AZ11, GS50 & GS53) Jacket Color : Black (Standard), other colors are available by consult. Flexibility : High Fire Retardant : Self-extinguishing UV Resistance : By ordering Tensile Resistance : Light 250N / Medium 500N / Heavy 800N RoHS Compliance : Yes Certificate : CE

Flexible Metal Conduit Low Fire Hazard - PES23X-Germany Series Product Description Flexible Metal Conduit, PES23X-Germany series is manufactured with stainless steel strip by continuous wound in interlock profile. This series of flexible metal conduit is developed with 3 classified levels, Light, Medium & Heavy, for different applications. The conduit sizes meet with the system normally used in Europe market. This series of product is excellent in tensile strength and suitable for most of the environment temperatures. It is also Low Fire Hazard. The material is RoHS approved as well. Applicable for electrical protection in Buildings, Railway System, Marines, Elevators, and etc.. Material：Stainless Steel Profile：Interlocked Temperature Range: -100℃~+600℃ IP Rating: IP 40 Flexibility: Medium Tensile Resistance: Light 250N / Medium 500N / Heavy 1000N RoHS Compliance: Yes Certificate: CE/EN61386 Nominal Conduit Size (mm) Nominal Conduit Size (inch) Part Number ID (mm) OD (mm) Bending Radius (mm) Package / Roll (ft/m) 12 5/16 PES23X-G - 12 9.5±0.2 12.5±0.2 40 50 16 3/8 PES23X-G - 16 13.0±0.3 16.0±0.3 50 50 20 1/2 PES23X-G - 20 17.0±0.3 20.4±0.3 60 50 25 3/4 PES23X-G - 25 22.0±0.3 26.0±0.3 70 50 32 1 PES23X-G - 32 26.0±0.3 30.0±0.3 80 25 40 1-1/4 PES23X-G - 40 34.0±0.4 39.0±0.4 120 25 50 1-1/2 PES23X-G - 50 40.3±0.4 44.9±0.4 150 15 63 2 PES23X-G - 63 51.6±0.4 56.6±0.4 190 15

Product Description Chinese liquid soil stabilizer, rock forming agent, road solidification Rammed earth wall solidification agent rammed earth technology rammed earth wall solidification agent rammed earth wall Adding cement Type A soil stabilizer JUSTSOLID ® technology manual I . Product introduction 1.1 Definition of soil stabilizer Soil stabilizer is a new type of environmental protection curing material, which acts directly on the soil to solidify the soil into a dense, uniform, high strength and durable composite stabilized soil layer. Composite stabilized soil is a semi-rigid material formed by new engineering material soil stabilizer and soil stabilization. Compared with the commonly used inorganic combined stabilized materials, the composite stabilized soil can achieve local materials, and has the characteristics of convenient construction, short construction period, low cost and excellent technical indicators for road use. In a certain range, it can replace the commonly used gravel, crushed stone, reduce the amount of lime and other inorganic binding materials, thus reducing the project cost, saving resources, saving energy, and conducive to ecological environmental protection. This technology is used in the construction and repair of composite stabilized soil subbase and base of new and reconstructed highway engineering, as well as pavement construction, wall construction and repair of different purposes. It has broad application prospects in municipal, transportation, water conservancy, foundation treatment and other projects. 1.2 Classification of soil stabilizer In CJJ/T286-2018 Technical Standard for the Application of Soil Solidifying Agent, the soil solidification agent is divided into Class A soil solidification agent and Class B soil solidification agent. Class A soil stabilizer: a powder or liquid additive that can improve the engineering performance of the foundation soil by physical or chemical reaction with cement (or lime and other cementitious materials), soil, water and air after being added into the soil. Class B soil stabilizer: after being added into the soil, it is a soil stabilizer that can be used alone through the physical or chemical reaction with soil, water and air, not mixed with cement (or lime and other cementitious materials), and a powder additive that can improve the engineering performance of the foundation soil. II. Physical and chemical properties Form: liquid or granular powder Solubility: soluble in water Type: ionic polymer type biological enzyme type Safety: ecological and environmental protection III.　Action mechanism The working principle of composite stabilized soil is to make the surface current of soil micelle reduce energy and fix a large amount of free water in the soil in the form of crystal water. The engineering properties of the soil are changed by a series of physical and chemical reactions after the soil stabilizer is mixed with the soil. The particles tend to agglomerate, the electrolyte concentration increases, and the volume expands to further fill the soil pores; Under the action of compaction, the whole structure is formed to make the solidified soil easy to be compacted and stable, reach the compactness that cannot be achieved by conventional methods, and improve its strength, compactness, modulus of resilience, deflection value, CBR, shear strength and other properties, so as to meet the requirements of road technical indicators. IV.Adaptability and scope of use Soil stabilizer can be applied to a variety of soil properties, such as clay, silt and sand; Mineral powder, slag, construction waste, etc. According to different soil properties, different curing schemes are formulated by adjusting the material ratio. 1. Subgrade construction The subbase of the expressway is hardened, and the base and subbase of the first class road and below are hardened. Hardening of base course and surface course of simple road or temporary road. Cement soil, soft soil and soft foundation solidification. 2. Site hardening Hardening treatment of parking lot, road, stockyard, storage yard, drilling well pad, production and processing yard, etc. 3. Rammed earth wall Vegetable, flower and breeding greenhouse; Construction or repair of ancient building walls; Earth wall of folk houses, etc. 4. Making unburned bricks After fully mixing the clay with the soil curing agent, it is supplemented with other hydraulic materials and directly pressed by the brick press. V. Construction plan 5.1 Basic Requirements ① Cementitious material: cement. It shall comply with the current national standard General Portland Cement (GB175). Cement of the same grade, brand, variety and delivery shall not be mixed. Cement grade 425 and above. The initial setting period is required to be more than 3 hours, and the final setting period is about 6 hours, not more than 10 hours. ②Water quality requirements: the water shall be non-polluting water (potable water for livestock). It conforms to the current industrial standard Standard for Concrete Water JGJ 63. ③ Construction thickness: the compaction thickness of each layer should be 15-20 cm (cm), and the total compaction thickness should be determined according to the construction requirements. ④ Addition of cementitious materials: the amount of cementitious materials generally accounts for 3% - 6% of the total soil amount. The details shall be determined according to the construction requirements and process. ⑤ Amount of soil stabilizer: about 0.5 kg per cubic meter of compacted earth; It is about 0.03% (three thousandths) of the mixture by weight. Curing agent for sealing layer: after curing, spray on the surface of solidified soil, dilute with water about 20 times, and spray the sealing layer. ⑥ Moisture determination method: Liquefied Road Soil Stabilizer Rammed Earth Wall Solidification Agent 0 Liquefied Road Soil Stabilizer Rammed Earth Wall Solidification Agent 1 Figure1 Soil moisture meter Figure2 Traditional simple method Use a soil moisture meter or traditional simple method: grab a handful of soil, put it in your hand and hold it tightly, and the soil mass will be formed without scattering; One meter from the ground, let the soil mass fall freely, and the soil mass spread evenly (fall to the ground and blossom), indicating that the moisture content is about 15%. ⑦ Material consumption: For example, the area of the soil to be solidified is calculated as 5 square meters, the thickness is 20 cm, and the total volume is 1 cubic meter after compaction. The density after compaction is calculated as 2 tons/cubic meter, and the total volume is 2 tons. *Earthwork=area * thickness=5 square meters * 0.2 meters=1 cubic meter * Total soil volume=earthwork * compaction density=1 * 2=2 tons; *Amount of cementitious material (cement)=total soil quantity * 10%=2 * 10%=0.2 tons； *Amount of soil stabilizer=total earthwork * amount of soil stabilizer=1 m3 * 0.5 kg/m3=0.5 kg; *Water consumption of diluting and curing agent=(optimum moisture content * total solid content) - (initial soil moisture content * total soil content) =18% * (soil volume+cement+diluted water) - 12% * total soil volume Note: In the formula, the initial water content of soil is calculated as 12%, and the optimum water content is calculated as 18%; The specific construction shall be subject to the actual water content.

Wickr me...gtchem Whatsapp/Telegram...+8615389281203 Threema...RPX6P3HC Product name: 1,4-Butanediol CAS No.: 110-63-4 Other Names: 1,4-BUTYLENE GLYCOL; 1,4-BUTANEDIOL; 1,4-DIHYDROXYBUTANE; BDO; BUTANEDIOL, 1,4-; TETRAMETHYLENE GLYCOL; VERSALINK CURATIVE 1,4 BDO Purity: 99.8% Application: research chemical Color: Colorless Liquid MOQ:1L Payment: Bitcoin, USDT, XMR, ETH.....Western Union for your choices Wickr me: gtchem Whatsapp/telegram +8615389281203

Minimum Order: 1 bags