Import-Export Bulletin Board Post an Offer to Sell

New here? Please subscribe
to post trade leads. It's FREE!

Telecommunications & Networks - Others


Home > Offers to Sell > Telecommunications & Networks > Others

Browse leads by category:
Telecommunication Stocks  Telecommunication Agents  Telecommunication Services
  
 
 

Summary of 9/18/21 4:13 GMT:>> Show Compact View
8/30/21 8:19 GMT
JMY5011 HF 13.56MHz RFID Reader and Writer Modules

Description JMY5011 is the second generation product based on JMY501 with UART and IIC serial port.JMY5011 has various functions and supports multi ISO/IEC standard of contactless card. The RFprotocol is complex. The designer combined some frequent used command of RF card and then usercould operate the cards with full function by sending simple command to the module. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is split design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module’s performance and stability. Qualifications • PCD model: NXP CL RC663 • Working frequency: 13.56MHz • Card supported: see: module function configuration table • Anti collision ability: Full function anti collision; be able to process multi-cards; be able to set operate single card only. • Auto detecting card: Supported, default OFF. The default state can be set. • Power supply: DC 5V (±0.5V) • Interface: IIC & UART (selected by SPS pin, recommend to use IIC) • Communication rate: IIC: Max.200Kbps UART: 19200bps / 9600bps / 38400bps / 57600bps / 115200bps • Max. command length: JCP02 252 Bytes; JCP03 510 Bytes; JCP04 253 Bytes; JCP05 510 Bytes; • Interface level: 3.3V (TTL level; 5V tolerance) • Power consumption: 130mA • Operating distance: 100mm (depending on card and antenna design) • Dimension: 21 mm*42mm • Weight: About 15g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • ISP: Supported • RoHS: Compliant

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Harry Yang
86-10-69559637
86-10-80883677
Send Inquiry
Jinmuyu Electronics Co., Ltd.
Room 132, Building 16, Tian Qiao Wan, Xin Hua North Road, TongZhou District,
Beijing 101100
China
8/30/21 8:10 GMT
13.56MHz HF RFID Reader Module JMY5041

Description JMY5041 is the second generation product based on JMY504 with UART and IIC serial port.JMY5041 has various functions and supports multi ISO/IEC standard of contactless card. The RFprotocol is complex. The designer combined some frequent used command of RF card and then usercould operate the cards with full function by sending simple command to the module. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is split design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module’s performance and stability. Qualifications • PCD model: NXP CV520、 PN512 • Working frequency: 13.56MHz • Anti collision ability: Full function anti collision; be able to process multi-cards; be able to set operate single card only. • Auto detecting card: Supported, default OFF. The default state can be set. • Power supply: DC 5V (±0.5V) • Interface: IIC & UART (selected by SPS pin, recommend to use IIC) • Communication rate: IIC: Max.200Kbps UART: 19200bps / 9600bps / 38400bps / 57600bps / 115200bps • Max.command length: JCP02 252 Bytes; JCP03 510 Bytes; JCP04 253 Bytes; JCP05 510 Bytes; • Interface level: 3.3V (TTL level; 5V tolerance) • Power consumption: 50mA • Operating distance: 100mm (depending on card and antenna design) • Dimension: 21 mm*42mm • Weight: About 15g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • ISP: Supported • RoHS: Compliant

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Harry Yang
86-10-69559637
86-10-80883677
Send Inquiry
Jinmuyu Electronics Co., Ltd.
Room 132, Building 16, Tian Qiao Wan, Xin Hua North Road, TongZhou District,
Beijing 101100
China
8/30/21 8:00 GMT
13.56MHz HF RFID Reader Module JMY5051

Description JMY5051 is the second generation product based on JMY505 with UART and IIC serial port. JMY5051 has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex. The designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is split design. They are connecting by a 50ohm coaxial wire whose length is up to 1000cm in good situation. But the best length of the coaxial line is 60cm. Qualifications • PCD model: NXP CL RC663 • Working frequency: 13.56MHz • Anti collision ability: Full function anti collision; be able to process multi-cards; be able to set operate single card only. • Auto detecting card: Supported, default OFF. The default state can be set. • Power supply: DC 5V (±0.5V) • Interface: IIC & UART (selected by SPS pin, recommend to use IIC) • Communication rate: IIC: Max.200Kbps UART: 19200bps / 9600bps / 38400bps / 57600bps / 115200bps • Max.command length: JCP02 252 Bytes; JCP03 510 Bytes; JCP04 253 Bytes; JCP05 510 Bytes; • Interface level: 3.3V (TTL level; 5V tolerance) • Power consumption: 130mA • Operating distance: 100mm (depending on card and antenna design) • Dimension: 21 mm*42mm • Weight: About 15g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • ISP: Supported • RoHS: Compliant

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Harry Yang
86-10-69559637
86-10-80883677
Send Inquiry
Jinmuyu Electronics Co., Ltd.
Room 132, Building 16, Tian Qiao Wan, Xin Hua North Road, TongZhou District,
Beijing 101100
China
8/30/21 7:55 GMT
13.56MHz HF RFID Reader Module JMY6804

Description JMY6804 is a series of RFID read/write module. It has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. Main Characteristics • Ferrite plate under the antenna, good performance for metal-around environments • EMV2010 certification ability in RF protocol part • 2 SAM slots, full fill payment system usage • USB HID interface, convenience to use on PC Qualifications • PCD model: NXP CL RC663 • PCB Layers:4 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693, ISO7816,NFC • Anti collision ability: Full function anti collision; be able to set multi- cards or single card • Auto detecting card: Supported, default OFF, could be set • SAM slots: 2, T=0 & T=1 9600, 19200, 38400, 55800, 57600, 115200bps • Data FLASH: 512 Bytes • Power supply: DC 5V (±10%) • Interface: USB HID, RS232C, UART or IIC by order • Communication speed: IIC: Max.200Kbps UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps USB: 2.0 HID class • Interface level: UART / IIC 3.3V (5V tolerance) • Max. command length: JCP04: 253bytes JCP05: 510bytes • Power consumption: Max. 150mA • Operating distance: 70mm (M1 typical distance, depending on card quality) • Dimension: 70mm * 50mm * 16.5mm • Weight: About 120g • ISP: Supported • RoHS: By order • CE certification: in plan (Jan.17,2015,soon) • Operating temperature: -25 to +85°C • Storage temperature: -40 to +125°C

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Harry Yang
86-10-69559637
86-10-80883677
Send Inquiry
Jinmuyu Electronics Co., Ltd.
Room 132, Building 16, Tian Qiao Wan, Xin Hua North Road, TongZhou District,
Beijing 101100
China
8/30/21 7:50 GMT
13.56MHz HF RFID Reader Module JMY6281

Description JMY6281 is integrated designing. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. JMY6281 has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex. The designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. JMY6281 support NFC functions: Peer to Peer; Card Mode (PICC); Reader (PCD- VCD). Main Characteristics • Modules integrated antenna, excellent consistency and stability • Support UART or IIC, meanwhile be with USB HID interfaces • Light and slim • The module has a length of 506 bytes command buffer could send APDU over 256 bytes to T=CL smart cards and SAM cards. The modules support FSDI=8 of ISO14443-4. Qualifications • PCD: NXP PN512 CV520 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO18092 • Anti collision ability: Full function anti collision; be able to process multi-cards; be able to set operate single card only. • Auto detecting card: Supported, default OFF. The default state can be set. • Power supply: DC 5V (±10%) • Interface: USB HID and UART or IIC by order • Communication speed: IIC: Max.200Kbps UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps USB: 2.0 HID class • Max. command length: JCP04: 253bytes JCP05: 510bytes • Interface level: UART / IIC: 3.3V (TTL level; 5V tolerance, by pull up) • Power consumption: 100mA • Operating distance: 80mm (depending on card and antenna design) • Dimension: 50.8mm * 50.8mm * 5mm • Weight: About 20g • ISP: Supported • RoHS: Compliant • Operating temperature: -25 to +85°C • Storage temperature: -40 to +125°C

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Harry Yang
86-10-69559637
86-10-80883677
Send Inquiry
Jinmuyu Electronics Co., Ltd.
Room 132, Building 16, Tian Qiao Wan, Xin Hua North Road, TongZhou District,
Beijing 101100
China
8/30/21 7:30 GMT
13.56MHz HF RFID Reader Module JMY622

Description JMY622 connects outside antenna by 50ohm coaxial cable. It fully supports ISO14443 and ISO15693 cards. It has EMV2010 certification ability, also could be set RF output level. The surface mount and very small module size design are fit to portable devices. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The module and antenna is split. The impedance between RF circuit and antenna was tuned by impedance analyzer, and then the module has excellent performance and stability. Main Characteristics • Module split antenna, connected by 50ohm coaxial cable, flexible antenna size and layout • EMV2010 certification ability • Surface mount and very small module size to fit portable devices • Low power consumption, could be set RF output level Qualifications • PCD: NXP MF RC531, SL RC400, CL RC632 • PCB Layers:4 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693 • Anti collision ability: Full function anti collision; be able to set multi- cards or single card • Auto detecting card: Termsed, default OFF, could be set • Data FLASH: 512 Bytes • Power supply: DC 3.3V & 5V (±10%) • Interface: UART and IIC • Interface level: UART / IIC: 3.3V (TTL level; 5V tolerance) • Communication speed: IIC: Max.200Kbps UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps • Max. command length: JCP04: 253bytes JCP05: 510bytes • Power consumption: Max.: 150mA Normal model: 90mA Idle model: 100uA • Operating distance: 100mm (M1 typical distance, depending on card quality) • Dimension: 20mm * 35mm * 4.1mm (without Antenna) • Weight: About 10g (without Antenna) • ISP: Termsed • RoHS: By order • CE certification: in plan (Jan. 17, 2015) • Operating temperature: -25 to +85°C • Storage temperature: -40 to +125°C

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Harry Yang
86-10-69559637
86-10-80883677
Send Inquiry
Jinmuyu Electronics Co., Ltd.
Room 132, Building 16, Tian Qiao Wan, Xin Hua North Road, TongZhou District,
Beijing 101100
China
8/30/21 7:01 GMT
13.56MHz HF RFID Reader Module JMY6202

Description JMY6202 is a series of RFID read/write module with UART, USB HID and IIC communication port. It has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The module and antenna is split. The impedance between RF circuit and antenna was tuned by impedance analyzer, and then the module has excellent performance and stability. It connects outside antenna by 50ohm coaxial cable. The surface mount and very small module size are fit to portable devices. Main Characteristics • Module split antenna, connected by 50ohm coaxial cable, flexible antenna size and layout • EMV2010 certification ability • Surface mount and very small module size to fit portable devices • Low power consumption, could be set RF output level • Good Performance in EMC Qualifications • PCD type: NXP CL RC663 • Working frequency: 13.56MHz • RF standard: ISO14443A,ISO14443B,ISO15693 • Card supported: see: module function configuration table • Anti collision ability: Full function anti collision; be able to set multi- cards or single card • Auto detecting card: Supported, default OFF, could be set • Power supply: DC 5V (±10%) • Interface: USB HID, IIC & UART (selected by SPS pin, recommend to use IIC) • Communication speed: IIC: 400Kbps UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps USB: USB 2.0 HID • Max. command length: JCP04: 253bytes JCP05: 510bytes • Interface level: UART/IIC: 3.3V (TTL level; 5V tolerance) • Power consumption: Max.: 150mA Idle model: 100uA • Operating distance: 100mm (M1 typical distance, depending on card quality) • Dimension: 20mm*35mm*4.1mm (without Antenna) • Weight: About 10g (without Antenna) • ISP: Supported • RoHS:Supported • Operating temperature: -25 to +85°C • Storage temperature: -40 to +125°C

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Harry Yang
86-10-69559637
86-10-80883677
Send Inquiry
Jinmuyu Electronics Co., Ltd.
Room 132, Building 16, Tian Qiao Wan, Xin Hua North Road, TongZhou District,
Beijing 101100
China
8/30/21 6:55 GMT
13.56MHz HF RFID Reader Module JMY6123

Description JMY6123 is a series of RFID read/write module. It has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is split design. 50ohm coaxial cable are linked the antenna and module. Main Characteristics • Module split antenna, connected by 50ohm coaxial cable, flexible antenna size and layout • EMV2010 certification ability • Metal shield for electromagnetic shielding • 4 SAM slots and 512K bytes data FLASH, full fill payment system usage Qualifications • PCD model: NXP CL RC663 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693, ISO7816, ISO18000-3MODE3 • Anti collision ability: Full function anti collision; be able to process multi-cards; be able to set operate single card only. • Auto detecting card: Termsed, default OFF, could be set • SAM slots: 4, T=0 & T=1 9600, 19200, 38400, 55800, 57600, 115200bps • Power supply: DC 5V (±10%) • Interface: RS232C, UART by order • Communication speed: UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps • Interface level: UART 3.3V (5V tolerance) • Max. command length: JCP04: 253bytes JCP05: 510bytes • Power consumption: Max.150mA • Operating distance: 100mm (M1 typical distance, depending on card quality) • Dimension: 79mm * 55mm * 7.5mm (without Antenna) • Weight: About 30g (without Antenna) • ISP: Supported • RoHS: Compliant • Operating temperature: -25 to +85°C • Storage temperature: -40 to +125°C

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Harry Yang
86-10-69559637
86-10-80883677
Send Inquiry
Jinmuyu Electronics Co., Ltd.
Room 132, Building 16, Tian Qiao Wan, Xin Hua North Road, TongZhou District,
Beijing 101100
China
8/24/21 9:36 GMT
Thin Film Thermistor

Details Material: Semiconductor ceramics/High temperature film Applicable temperature range:-30~90℃ Output signal: analog signal output Advantages 1. The product is a thin film thermistor 2. Good stability and high reliability 3. Wide resistance range: 2~500KΩ 4. High resistance and B value accuracy 5. Glass package, can be used under harsh conditions such as high temperature and high humidity 6. Small size, sturdy structure, easy for automatic installation 7. Operating temperature range -30~+90℃ 8. Fast heat induction and high sensitivity Application 1. Temperature control and temperature detection of household appliances such as induction cooker, electric pressure cooker, rice cooker, electric oven, disinfection cabinet, water dispenser, microwave oven, electric heater, etc. 2. Temperature detection and temperature compensation of medical equipment (such as copiers, printers, etc.) 3. Temperature control and testing of industrial, medical, environmental protection, meteorological, and food processing equipment 4. Temperature protection of rechargeable battery pack and charger 5.Temperature compensation of instrument coils, integrated circuits, quartz crystal oscillators and thermocouples General parameters ResistanceR25℃: 5K 10K 15K 20K 50K 100K 200K B value(R25/R50) 3380 3950 3470 4200 3977 4100 4200 Tolerance 1% 2% 3% 5% Note: What is the B value: A material constant that describes the resistance-temperature relationship. The value of B can reflect the scale of resistance to temperature change between two specific temperatures. As the temperature changes, the resistance value of a product with a large B value under the same conditions changes more, that is to say, it is more sensitive. TOPOS is a sensors suppliers, we provide sensor solutions, smd thermistor, thermistor resistor and etc. Want to know more? Please contact us.

Contact:
Phone:
Fax:
Email:
toposen
0755-83687011
0755-29053891
Send Inquiry
Shenzhen Temp-sen sensor Co., LTD
6F, JinXiongDa Indusry Park , GuanLan Town, LongHua District, Shenzhen, China.
Shenzhen 518055
China
8/24/21 9:35 GMT
Thermistor

Temperature Sensor For Home Appliance For Pellet Grill For Food For Instrumentation For Pet Box & Tank For Printer & Copier For Vehicle Electronics For Green-car For Fire Alarm For Medical For HVAC Thermistor NTC Thermistor PTC Thermistor Digital Thermistor Other Sensors Temperature And Humidity Sensor/Detector/Probe Temperature Switc Gas Sensor Dust Sensor TOPOS is a thermistor suppliers and sensors factory, we provide termistor ntc ptc, two types of thermistors, ntc and ptc thermistor, ptc and ntc thermistor, ntc ptc thermistor, thermistor resistor, ntc resistor and etc. Want to know different types of thermistors or more? Please contact us.

Contact:
Phone:
Fax:
Email:
toposen
0755-83687011
0755-29053891
Send Inquiry
Shenzhen Temp-sen sensor Co., LTD
6F, JinXiongDa Indusry Park , GuanLan Town, LongHua District, Shenzhen, China.
Shenzhen 518055
China
8/24/21 9:34 GMT
Temperature Sensor

Temperature Sensor For Home Appliance For Pellet Grill For Food For Instrumentation For Pet Box & Tank For Printer & Copier For Vehicle Electronics For Green-car For Fire Alarm For Medical For HVAC Thermistor NTC Thermistor PTC Thermistor Digital Thermistor Other Sensors Temperature And Humidity Sensor/Detector/Probe Temperature Switc Gas Sensor Dust Sensor TOPOS is a temperature transducer suppliers, we provide sensor products, sensors used for temperature measurement, temperature transducer, thermistor sensor, negative coefficient resistor and etc. Want to know temperature sensors types or more? Please contact us.

Contact:
Phone:
Fax:
Email:
toposen
0755-83687011
0755-29053891
Send Inquiry
Shenzhen Temp-sen sensor Co., LTD
6F, JinXiongDa Indusry Park , GuanLan Town, LongHua District, Shenzhen, China.
Shenzhen 518055
China
8/24/21 9:33 GMT
SMD Thermistor

Details Material: Semiconductor ceramics Applicable temperature range:-40~120℃ Output signal: analog signal output Advantages 1. The product is smd ntc thermistor 2. Good stability and high reliability 3. Wide resistance range: 2~500KΩ 4. High resistance and B value accuracy 5. Glass package, can be used under harsh conditions such as high temperature and high humidity 6. Small size, sturdy structure, easy for automatic installation 7. Operating temperature range -40~+120℃ 8. Fast heat induction and high sensitivity Application 1. Temperature control and temperature detection of household appliances such as induction cooker, electric pressure cooker, rice cooker, electric oven, disinfection cabinet, water dispenser, microwave oven, electric heater, etc. 2. Temperature detection and temperature compensation of medical equipment (such as copiers, printers, etc.) 3. Temperature control and testing of industrial, medical, environmental protection, meteorological, and food processing equipment 4. Temperature protection of rechargeable battery pack and charger 5.Temperature compensation of instrument coils, integrated circuits, quartz crystal oscillators and thermocouples General parameters ResistanceR25℃: 5K 10K 15K 20K 50K 100K 200K B value(R25/R50) 3380 3950 3470 4200 3977 4100 4200 Tolerance 1% 2% 3% 5% Note: What is the B value: A material constant that describes the resistance-temperature relationship. The value of B can reflect the scale of resistance to temperature change between two specific temperatures. As the temperature changes, the resistance value of a product with a large B value under the same conditions changes more, that is to say, it is more sensitive. TOPOS is a sensors suppliers, we provide surface mount thermistor, smd thermistor, ntc smd, thermistor resistor and etc. Want to know more? Please contact us.

Contact:
Phone:
Fax:
Email:
toposen
0755-83687011
0755-29053891
Send Inquiry
Shenzhen Temp-sen sensor Co., LTD
6F, JinXiongDa Indusry Park , GuanLan Town, LongHua District, Shenzhen, China.
Shenzhen 518055
China
8/24/21 9:32 GMT
Printer & Copier Temperature Sensor

Details Material: semiconductor ceramic resistor chip / high-efficiency conductive Dumet wire/glass Applicable temperature range: -45~500℃ Output signal: analog signal output Advantages 1.MTG2-1/2/3/4 series products are radial lead single-ended glass package type 2. Good stability and high reliability 3. Wide resistance range: 2KΩto500KΩ 4. High resistance and B value accuracy 5. Glass package, can be used under harsh conditions such as high temperature and high humidity 6. Small size, sturdy structure, easy for automatic installation 7. Operating temperature range -50℃to+300℃ 8. Fast heat induction and high sensitivity Application 1. Temperature control and temperature detection of household appliances such as induction cooker, electric pressure cooker, rice cooker, electric oven, disinfection cabinet, water dispenser, microwave oven, electric heater, etc. 2. Temperature detection and temperature compensation of medical equipment (such as 3d printer bed thermistor, copier, etc.) 3. Temperature control and testing of industrial, medical, environmental protection, meteorological, and food processing equipment 4. Temperature protection of rechargeable battery pack and charger 5.Temperature compensation of instrument coils, integrated circuits, quartz crystal oscillators and thermocouples General Parameter 6.ResistanceR25℃: 7.5K 8.10K 9.15K 10.20K 11.50K 12.100K 13.200K 14.B value(R25/R50) 15.3380 16.3950 17.3470 18.4200 19.3977 20.4100 21.4200 22.Tolerance 23.1% 24.2% 25.3% 26.5% 27. 28. 29. Note: What is the B value: A material constant that describes the resistance-temperature relationship. The value of B can reflect the scale of resistance to temperature change between two specific temperatures. As the temperature changes, the resistance value of a product with a large B value under the same conditions changes more, that is to say, it is more sensitive. TOPOS is a industrial sensor suppliers, we provide 3d printer thermistor, ntc thermistor, temperature sensors and etc. Want to know more? Please contact us.

Contact:
Phone:
Fax:
Email:
toposen
0755-83687011
0755-29053891
Send Inquiry
Shenzhen Temp-sen sensor Co., LTD
6F, JinXiongDa Indusry Park , GuanLan Town, LongHua District, Shenzhen, China.
Shenzhen 518055
China
8/24/21 9:32 GMT
School Fire Monitor Temperature Sensor

Details Material: NTC glass-sealed thermistor/plastic cable tie/Teflon wire Applicable temperature range:-30~150℃ Output signal: analog signal output Advantages 1. Fast cable tie shell, which can be quickly installed and used. 2. Good stability and high reliability 3. Wide resistance range: 2~500KΩ 4. High resistance and B value accuracy 5. Glass package, can be used under high temperature and severe change 6. Small size, sturdy structure, easy for automatic installation 7. Operating temperature range -30~+150℃ 8. Fast heat induction and high sensitivity Application Applications of fire alarm using thermistor include temperature measurement of fire-fighting corridors, school fire-fighting temperature monitoring, school high-temperature smoke detector and fire alarm heat detector for the dormitory, etc. General parameters ResistanceR25℃: 5K 10K 15K 20K 50K 100K 200K B value(R25/R50) 3380 3950 3470 4200 3977 4100 4200 Tolerance 1% 2% 3% 5% Note: What is the B value: A material constant that describes the resistance-temperature relationship. The value of B can reflect the scale of resistance to temperature change between two specific temperatures. As the temperature changes, the resistance value of a product with a large B value under the same conditions changes more, that is to say, it is more sensitive. TOPOS is a industrial sensor manufacturers, we provide thermistor temperature sensing alarm mini project, thermistor temperature sensing alarm pdf, applications of fire alarm using thermistor, fire alarm using thermistor ppt, high temperature smoke detector, smart heat detector, wireless heat detector for garage, ntc thermisto and etc. Want to know heat detector price or more? Please contact us.

Contact:
Phone:
Fax:
Email:
toposen
0755-83687011
0755-29053891
Send Inquiry
Shenzhen Temp-sen sensor Co., LTD
6F, JinXiongDa Indusry Park , GuanLan Town, LongHua District, Shenzhen, China.
Shenzhen 518055
China
4/19/21 7:46 GMT
TK1100 - LTE / DMR Radio

The TK1100 is suitable for mission critical communications since it comes with Dual mode DMR and LTE networks working seamlessly to ensure communications are always possible. Find here details of the company selling DMR Radio and LTE Mobile Radio. All the products with super quality and competitive price. TOKIE is a leader in the industry and we will not disappoint you. Operating System TOKIE customize Android 8.1 Oreo Hardware Platform MTK6739 Quad-Core A53 1.5GHz 64bit Network Type Support 2G, 3G(WCDMA, TD-SCDMA, C2K), 4G(FDD LTE/TDD LTE) RAM 1GB RAM + 8GB ROM / 2G RAM +16G ROM Display Corning® Gorilla® Glass 3, TFT 3.1“IPS, 800 x 480 TOKIE GPS GPS, GLONASS & AGPS, dual-mode positioning WiFi 802.11 a/b/g/n, dual-band Bluetooth BT4.0 Sensor G-Sers , or, Proximity Sensor, Light Sensor USB Interface Micro USB 2.0, support OTG SIM Card Micro-SIM single card Encoding / Decoding Capabilities H.264 high profile, 720P 30FPS Speaker 36mm ⏀ 2.0W @ 90dB Microphone Sensitivity -42dB Rear Camera 8 million pixels camera Front Camera 2 million pixels camera Video Quality Support 720P video recording Indicator LED Single 3-colors LED M6 Support External Speaker, Mic, Earphone, DMR Talking, UART Working Environment Temperature -20 °C - 60 °C, humidity 20% - 90% Degree of Protection IP67, water & dust resistance, anti-drop 1.5 meters Weight 210g Battery Capacity 3,600mAh, replaceable Size 119.5mm x 61.5mm x 23.5mm Frequency Range UHF 400 ~470 MHz Frequency Stability ± 0.5ppm Number of Channels 16 (Analog/Digital) Channel Spacing 12.5KHZ / 25KHZ (Analog), 12.5KHZ (Digital) Vocoder AMBE3000, WT3000, AMBE1000, SELP, AVDS MIL-STD MIL-STD 810D and E Audio Distortion Less than 10% Audio Power 2 Watt DMR TIER 1 & TIER 2 Transmitting Power Low: 0.5W, High: 2W Antenna Impedance 50Ω Sensitivity 0.22 mV (Typical) DMR antenna Type External glue rod antenna Support Direct Mode, TDMA, Frequency Scanning, DTMF(Analog), CTCSS/CDCSS

Minimum Order: 500

Contact:
Phone:
Fax:
Email:
Max Huang
65 6966 5655

Send Inquiry
IRVEES Technology Pte Ltd
3B Hamilton Road, Singapore 209176
Singapore 209176
Singapore


SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
Result Page:   1   |   2  |   Next >>

Post an Offer to Sell
Home - Offers to Buy - Business Opportunities - Company Profiles

© 1996-2021 IMEXBB.com. All rights reserved.

IMEXBB.com