 |
Post an Offer to Sell New here? Please subscribe to post trade leads. It's FREE! |
Tools & Hardware
Home > Offers to Sell > Tools & Hardware
| Summary of 6/10/26 20:49 GMT: | >> Show Compact View |
)
Specification: 1. Exhaust System: Front 2. Suction Power:85-90kg 3. Slide Hammer Weight:3.5lb 4. Air Inlet:1/4" 5. Air Pressure:6kg/cm2 6. Air Consumption:240L/min 7. Net Weight:2750g 8. Tool Length:1120mm 9. Packing:4pcs/14kg/16kg/1.32' Application: It supplies a new way that save a lot of time to fix steel plate. Let the obsession with dent throw out. It's the best way to solve. As easy as pie to use. When pressure valve is bon after a few minute, however is a dent of car, an oil box of motorcycle or a steel plate of air plane, all of trouble will be solved.
Phone:
Fax:
Email:
886-4-22763496
886-4-22799396
No.35, Yongyi 8th St., Taiping Dist.,
Taichung City 411
Taiwan
)
Description: The right-angle drill is primarily designed to fit into tight spaces that a regular drill could not be applied. The angle allows for a smaller head and shorter extension of the handle, so that corners can be drilled from the inside. This is also true of any space that is not long enough to handle a traditional drill. Specification: 1. Free Speed:3000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:540L/min 5. Net Weight:895g 6. Tool Length:240mm 7. Collet Size: 6mm (1/4") 8. Locking Cap: 5/16X24T (1/4x28T,M6x1.0,1/4x20T) 9. Packing:10pcs/10kg/11kg/0.53'
Phone:
Fax:
Email:
886-4-22763496
886-4-22799396
No.35, Yongyi 8th St., Taiping Dist.,
Taichung City 411
Taiwan
)
Description: 60mmx260mm Miniaturized, lightweight and 1.3 kgs only. Handle angle can adjusting range reach 180. Adjustable guide shaft. Handle rear can be connected with muffle tube and protect work piece surface will not be oil pollution. Suitable for Wooden furniture, plastics, glass, metalwork , desk, chair, bed and cell Phone Housing, etc. From grind to the surface polishing all can application. Rid of surface scar and deckle edge. Stainless steel surface tiny mark processed. Specification: 1. Free Speed:17000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:650L/min 5. Net Weight:1300g 6. Tool Length:1900mm 7. Exhaust System: Rear 8. Packing:10pcs/15kg/16kg/2.3'
Phone:
Fax:
Email:
886-4-22763496
886-4-22799396
No.35, Yongyi 8th St., Taiping Dist.,
Taichung City 411
Taiwan
)
Rubber sleeve keeps hands from getting cold or slip Don't use polishing pads bigger than 125 mm (5"). There is easy to cause damage to the tool. Front thumb-adjustable water knob enhances the tool control. No visible water tube and screw make a seamless smooth touch and no more break risk when dropping. Cast from aircraft aluminum. The watertight sealed bearings provide long life and smooth rotational speeds. The water and air controls are simple to use and conveniently located. Rear air vent removes exhaust through a hose protector, away from operator's hands. The tool is a powerful, reliable air tool ideally suited for continuous wet polishing in stone industry, and is safer when used wet! Detachable rotor and gear design brings you an economical repair Specification: 1. Free Speed:4500 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:660L/min 5. Net Weight:1220g 6. Tool Length:235mm 7. Exhaust System:Front 8. Packing:10pcs/21kg/22kg/1.38'
Phone:
Fax:
Email:
886-4-22763496
886-4-22799396
No.35, Yongyi 8th St., Taiping Dist.,
Taichung City 411
Taiwan
)
Description: There is omnipotent hold fast. It's easy to clip firmly in various of thickness on process tools of plane surface. It can purge hardened surface of metal that made from discharge electricity quickly. Long life, high speed, light weight and trouble free. to the processing of footwear, mold and woodworking industries Specification: 1. Strokes Per Minute:3400 spm 2. File Shake Dia:5mm 3. Stroke Length:5mm 4. Air Inlet:1/4" 5. Air Pressure:6kg/cm2 6. Air Consumption:150L/min 7. Net Weight:580g 8. Tool Length:700mm 9. Packing:10pcs/8kg/9kg/1.2'
Phone:
Fax:
Email:
886-4-22763496
886-4-22799396
No.35, Yongyi 8th St., Taiping Dist.,
Taichung City 411
Taiwan
)
Description: Flux Chipper it's powerful for exerting and chisel is suitable to dismantle. It's was designed specially to use for a long time. And suitable for boat, machine and large instrument to clear off the rust and adhesion underside. Specification: 1. Blow Per Minute:3000 b/min 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:200L/min 5. Net Weight:1800g 6. Tool Length:230mm 7. Packing:5pcs/11kg/11.5kg/0.4'
Phone:
Fax:
Email:
886-4-22763496
886-4-22799396
No.35, Yongyi 8th St., Taiping Dist.,
Taichung City 411
Taiwan
)
Description: Needle Scaler powerful for exerting and chisel is suitable to dismantle. It's was designed specially to use for a long time. And suitable for boat, machine and large instrument to clear off the rust and adhesion underside. Specification: 1. Blow Per Minute:3000 b/min 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:200L/min 5. Net Weight:2590g 6. Tool Length:385mm 7. Needle:19 pcs 8. Packing:5pcs/14kg/14.5kg/0.4'
Phone:
Fax:
Email:
886-4-22763496
886-4-22799396
No.35, Yongyi 8th St., Taiping Dist.,
Taichung City 411
Taiwan
)
Description: The 3” PAD supply various of sponge and wool-wheel for partial. Small volume, light weight, low noise. It’s suitable for the small area to smooth. A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking. Specification: 1. Free Speed:2500 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:790g 6. Tool Length:160mm 7. Packing:20pcs/20kg/21kg/1.2'
Phone:
Fax:
Email:
886-4-22763496
886-4-22799396
No.35, Yongyi 8th St., Taiping Dist.,
Taichung City 411
Taiwan
)
Description: There are 2” or 3” kinds of PAD it’s useful for aperture smooth and grind. Long life, high speed. Light weight and trouble free. A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking. Specification: 1. Free Speed:15000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:650g 6. Tool Length:160mm 7. Packing:20pcs/18kg/19kg/1.2'
Phone:
Fax:
Email:
886-4-22763496
886-4-22799396
No.35, Yongyi 8th St., Taiping Dist.,
Taichung City 411
Taiwan
)
Description: A lot of appurtenances to supply the various of sandpaper and burnishes for process. It was designed specially to use for a long time. Volume is small, the weight is light and the rotational speed is fast. There are three kind orbital diameter can choose.(0.75mm, 1.5mm, 3mm) It’s suitable for burnishes that cannot grind the detailed polish and useful for process in difficult reach area, mold and woodworking. Specification: 1. Free Speed:13000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:815g 6. Tool Length:180mm 7. Packing:20pcs/21kg/22kg/1.2' 8. SM01N:Orbital Diameter:3mm 9. SM01NA:Orbital Diameter:1.5mm 10. SM01NB:Orbital Diameter:0.75mm
Phone:
Fax:
Email:
886-4-22763496
886-4-22799396
No.35, Yongyi 8th St., Taiping Dist.,
Taichung City 411
Taiwan
)
We Provide Forged Piston Check Valves, 1-1/2 Inch, 800 LB, API 602, ASME B16.34, Bolted Bonnet, Regular Bore, ASTM A105N, Socket Weld End, and Piston Type. 800LB Forged Piston Check Valve, API 602, 1-1/2INCH, 800LB, SW, A105 Body, Trim 8 Valve Description: API 602 Forged Piston Check Valve Design Standard: API 602, ASME B16.34 Structure: Bolted Bonnet Nominal size: 1-1/2 Inch Nominal class: 800 LB Bore: Regular Bore End Connection: SW-Socket Weld End Operation: / Body Material: ASTM A105N Trim Material: 1Cr13+STL, No.8 Face-to-face: Manufacturer Standard Test and inspection: API 598 Key Features: Fully guided solid disc, Piston Type (Swing type available) Product Range: Body material: Carbon Steel, Stainless Steel, Duplex steel, Alloy Normal diameter: 1/2 - 2 Inch (DN15 - DN50) Pressure range: 800 - 2500 LB End connection: SW, NPT, BSP Working temperature: -29℃ - +400℃
Minimum Order: 1 bags
Phone:
Fax:
Email:
Building 2, NO.59, Songshan Road, SND
Suzhou 215000
China
)
Dual Plate Check Valve, API 594, 6 inch, 150 LB, CF8M, Viton Seat Valve Description: Dual Plate Check Valve Design Standard: API 594 Structure: Dual Plate spring return Nominal size: 6 Inch, DN150 Nominal class: 150 LB, PN20 End Connection: Wafer-RF Operation: / Body Material: ASTM A351 CF8M Trim Material: 316 disc, X-750 Spring, Viton seat Face to face: API 594 Test and inspection: API 598 Key Features: Retainerless Design, High flow efficiency, Low noise, Short face-to- face length
Minimum Order: 1 bags
Phone:
Fax:
Email:
Building 2, NO.59, Songshan Road, SND
Suzhou 215000
China
)
We Provide Bolted Bonnet Globe Valves, ASTM A216 WCB, BS 1873, T type, Standard Bore, Plug Disc, 8 Inch, 600 LB, DN200, PN100, OS&Y, BB, RF. Product Item: Bolted Bonnet Globe Valve Model No.: 8GL6RWCB08 Design Standard: BS 1873 Structure: Bolted Bonnet, T type, Plug Disc Nominal size: 8 Inch Nominal class: 600 LB Bore Type: Standard Bore End Connection: RF (Raised Face) Operation: Handwheel Body Material: ASTM A216 WCB Trim Material: 1Cr13+STL, No.8 Face to face: ASME B16.10 Test and inspection: API 598 Key Features: Plug Disc, OS&Y, Rising Handwheel, Low fugitive emission stem packing available, Renewable Seat, Connival Disc available
Minimum Order: 1 bags
Phone:
Fax:
Email:
Building 2, NO.59, Songshan Road, SND
Suzhou 215000
China
)
Buy our Stainless Steel F304 Forged Gate Valve, designed as per API 602 standards with a 3/4 inch size, and 800 LB capacity. The valve features a sturdy A182 F304 body, Trim 20, and Handwheel for easy operation. Suitable for SW applications. Valve Description: 1851006 API 602 Forged Gate Valve 0.75G8SF30420 Design Standard: API 602, ASME B16.34 Structure: Bolted Bonnet, OS & Y Nominal size: 3/4 Inch Nominal class: 800 LB Bore: Regular Bore End Connection: SW-Socket Weld End Operation: Handwheel Body Material: ASTM A182 F304 Trim Material: SS304+STL, No.28 Face-to-face: Manufacturer Standard Test and inspection: API 598 Key Features: Independent backseat, Fully guided solid wedge, Adjustable Packing Gland
Minimum Order: 1 bags
Phone:
Fax:
Email:
Building 2, NO.59, Songshan Road, SND
Suzhou 215000
China
)
The 12-inch, 150 LB WCB Flanged Trunnion Mounted Ball Valve is a high-quality valve designed for durability and reliability. It meets API 6D standards and features an RF connection, a 2pcs casting body, and gear operation. The F316 ball and seat provide excellent resistance to corrosion and wear, while the RPTFE seat ensures a tight seal. This valve is perfect for a wide range of industrial applications that require dependable performance. Valve Description: 1811017 Trunnion Mounted Ball Valve 12BS1RWCB Design Standard: API 6D Structure: Two pieces body, Side Entry, Bolted Bonnet, Soft Seat Nominal size: 12 Inch Nominal class: 150 LB Bore Type: Full Bore End Connection: RF Flanged Operation: Gear Operation Body Material: ASTM A216 WCB Trim Material: F316 stem, ball, RPTFE seat Face to face: ASME B16.10 Test and inspection: API 598, API 6D Key Features: Double Block & Bleed (DBB), Anti-static Device, Fire Safe API 607/6FA, Anti-Blowout Stem, Emergency sealant injection, Tight Shutoff
Minimum Order: 1 bags
Phone:
Fax:
Email:
Building 2, NO.59, Songshan Road, SND
Suzhou 215000
China
SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
| Post an Offer to Sell |
| HomeOffers to BuyBusiness OpportunitiesCompany Profiles |
© 1996-2026 IMEXBB.com. All rights reserved.
 |
|