Tools & Hardware

What is type C goniophotometer definition? LSG-6000 Moving Detector Goniophotometer (Mirror Type C) was manufactured by LISUN completely meets LM-79-19, IES LM-80-08, COMMISSION DELEGATED REGULATION (EU) 2019/2015, CIE-121, CIE S025, SASO 2902, IS16106 and EN13032-1 clause 6.1.1.3 type 4 requirements. LSG-6000 is the latest upgraded product of LSG- 5000 and LSG-3000 in compliance with the requirements of the LM-79-19 standard Clause 7.3.1, its an automatic light distribution intensity 3D curve testing system for measuring light. The measuring distance is from 5m to 30m. What is the use of goniophotometer? LSG-6000 gonio photometer manufacturer is LISUN, it can measure all types of lighting sources, LED, Plant Lighting or HID luminaires such as indoor and outdoor luminaires, roadway luminaires, street lamps, flood lights and other kinds of luminaires. Measurement: Luminous Intensity Data, Photometric Data, Luminous Intensity Distribution, Zonal Luminous Flux, Luminaries Efficiency, Luminance Distribution(Option), Coefficient Of Utilization, Luminance Limitation Curves Glare, Maximum Ratio of Distance to Height, Equal Illuminance Diagrams, Curves of Luminaires VS Lighting Area, Isocandela Diagrams, Efficient Luminescence Angle, EEI, UGR, etc. Features: • The near field detector moves together with the big mirror in a line. The big mirror and the far field detector move synchronously. • The burning position of the lumainares will be kept without moving at all, and the detector will always sense the light directly from the luminares. • The rotary motor is from Japan MITSUBISHI MOTORS and the angle decode system is from Germany. They help the goniophotometer rotating smoothly with high accuracy. It is very stable when start and stop. • The working principles are according to IESNA and CIE. The LSG-6000 completely meet the LM-80, LM-79, LM-75, GB, EN and CIE121-1996 standards. • Special collimation device with cross laser line help you installing the position of the luminaires under test conveniently and accurately. Specifications: • The luminaire under test rotates around the mirror with an angle of (γ) vertical axis ±180° (or 0-360°) and the luminaire rotates around itself with an angle of (C) horizontal axis ±180° (or 0-360° ). • The accuracy of angle: 0.05°, Resolution of angle: 0.001° • Accuracy of Goniophotometry detector: Constant temperature photo detector DIN5032-6/CIE pub1. No. 69 Class L • LISUN goniophotometer software can export CIE, IES, LDT and other format files. These kinds of format files can be used via other illumination and luminaire design software such as DiaLux. • Connect the goniophotometer to PC via USB cable. English version software can run on Win7, Win8 or Win10, Win11 • LSG-6000 can be used together with a CCD Spectroradiometer to test spatial CCT Distribution and other Spectral color parameters. We call this system "Goniospectroradiometer (LSG-6000CCD)". LSG-6000CCD Goniospectroradiometer = LSG-6000 Goniophotometer System + LPCE-2 Integrating sphere Spectroradiometer System. Please click to download the LSG-6000CCD Brochure • The LSG-6000CCD software and hardware support the plant lighting PAR, PPF and PPFD spatial distribution test , and it can export IES/LDT files How does Mirror Goniophotometer work? Goniophotometer adopts the measuring principle of fixed detector and rotating lamp method. The measuring lamp is installed on a two-dimensional rotating worktable, and the luminous center of the lamp coincides with the rotating center of the rotating worktable through the laser beam of the laser sight.

Minimum Order: 1 bags

CBB60 electrical appliances are metallized polypropylene film electrical appliances used for AC motors. The shell is cylindrical or metal aluminum shell. The main features are small size, light weight, and good self-feeding performance. Types of CBB60 Capacitor for Sale CBB60 Capacitor with Aluminum Case CBB60 Capacitor with White Epoxy CBB60 Dual Capacitor CBB60 Motor Run Capacitor with 2 Pins CBB60 Motor Run Capacitor with 4 Pins CBB60 Motor Run Capacitor with Cable CBB60 Motor Run Capacitor with 2 Wires  Features of CBB60 Capacitor Application Widely applied to the starting and running of AC single-phase motors at 50Hz/60Hz frequency power. Self-healing Property Good Stability and Reliability As one of cbb60 capacitor suppliers, we will do our best to meet all the needs of customers. More types of capacitor, please visit our website.

Minimum Order: 1 bags

TIMKEN LM48548/LM48510 Inch Taper Roller Bearing Weight 0.259 Kgs LM48548/LM48511A In Stock LM48548/10 TIMKEN Tapered roller bearings utilize conical rollers and raceways, arranged so that the rollers and raceways meet at a common apex. The rollers are guided by contact between the large end of the roller and a rib on the inner ring. This provides high capacity for radial and single thrust loads. Koyo pioneering efforts in developing crowned rollers have resulted in greater load-carrying capability and longer bearing life. Crowned rollers under load distribute stress equally along their full length of contact with the raceways, thereby eliminating stress concentration at the roller ends. This design concept also compensates for minor misalignment between shaft and housing bore and deflection under load, thereby reducing stress concentration.

Advantages: One of the key advantages of a water cooling heatsink is its superior thermal performance. Water has a much higher thermal conductivity than air, which means it can absorb heat more efficiently and transfer it away from the heat source. This allows for more effective cooling of high-power electronics and other heat-generating components. Water cooling heatsinks are commonly used in high-performance computing, gaming, and overclocking applications. They are especially well-suited for applications where high heat loads are present and where precise temperature control is required. Feature: High thermal conductivity: Water has a much higher thermal conductivity than air, which means it can absorb heat more efficiently and transfer it away from the heat source. Easy maintenance: Water cooling heatsinks are typically easy to maintain, as they only require occasional cleaning and refilling of the water coolant. This can be done quickly and easily, without the need for specialized tools or equipment. Aesthetics: Water cooling heatsinks can be visually appealing, as they can be customized with LED lighting and other features. This can make them a popular choice for gaming enthusiasts and other users who want to showcase their cooling system.

Hot rolled bars are available on the website in all grades and sizes. Select the properties you purchased, such as diameter, hot rolled, cold rolled, corrugated, etc. Hot rolled steel bars are stronger than galvanized steel bars. They prevent cracks in concrete. When used with concrete for construction, thinner concrete is fine. Hot-rolled steel bars are extremely long-lived, cost-effective and responsive. Hot rolled steel bars have proven useful in enhancing the functionality of many commercial enterprises. These include airports, agriculture, fencing, infrastructure and concrete slabs. When you buy hot rolled deformed rebar, you compare various international sellers and narrow down your options based on price, quality and reviews from previous customers. Length: 12m or as per customers' requirements Technology: Hot rolled, right hand Accessories: full hex nut, spherical hex nut, bearing plate, domed nut, anchor bolt, foundation bolt, couplers, spring bar Packing: in bundles Delivery: 15-30 days COMPOSITION: The PSB950 thread bar is made of black steel with a continuous right-handed along the entire length of the thread bar. The continuous threading allows the cut of the bar with different length according to the design requirements and it also improves the adhesion between the bar and grouting.

Anchor plate works closely working with the Nuts. And there are different types like flat,domed,spherical plate etc. Anchor Plates are wooden or metal plates attached to or embedded in brackets and used as anchors (such as for supporting cables). Anchor plates consist of steel plates with welded shear bolts used to connect steel elements to concrete elements. For this purpose, the anchor plates are concreted into the concrete elements. Shear bolts are used as anchors. When installed, the steel plate is flush with the surface, with no concrete on one side. On this side, welding of steel components is possible. Typical Application: Reinforcement of the nut tension and fixation. Different sizes can be processed according to construction requirements. Bearing plates provide a larger bearing surface than standard cut washers, helping to distribute loads more efficiently. The square plate allows it to cover a larger area of surface area than a standard round gasket. This makes them ideal for fasteners required for heavy duty applications.

Spherical Hex Nut Product Description Spherical Hex Nut for High strength thread bar Hex nut is an important part of thread bar accessory, it is used in all kinds of highway, railway, municipal construction, large Bridges, soil nailing, foundation pit anchoring, slope anchoring and other engineering construction. Hex Nuts are flat nuts and Spherical nuts, flat nut (upper nut), Spherical nut (lower nut). Commonly used specification is divided into 20 mm, 25 mm and 32 mm, 36 mm, 40 mm, commonly used materials are divided into 45 #, 40 cr material, hardness value is between 28 and 35. Normal there are full hex nut and spherical hex nut used in construction. There is also lock nut, which is shorter and thinner than normal hex nut in the tensioning end. Typical Application: Flat nut is often used for fixed end, Spherical nut is often used for tension end. Hex Nuts For Sale Hex nuts are the most used nuts in industrial and commercial applications. These hex nuts can be used on all types of machine threaded fasteners including anchors, bolts, screws, studs and threaded rods. Hex nuts are used with other fasteners (usually bolts) to close or complete the fastening. Hex nuts are available in zinc, plain, stainless steel and galvanized finishes for long- lasting durability.

PSB830/1030 Thread Bar The PSB830 thread bar is made of black steel with a continuous left-handed along the entire length of the bar. The continuous threading allows the cut of the bar with different length according to the design requirements. Product Description Thread Bar / Post-Tensioning Bar 1. Grade: PSB830 2. Length: 9m, 12m or as per customers' requirements 3. Technology: Hot rolled, left hand 4. Accessories: full hex nut, spherical hex nut, bearing plate, domed nut, anchor bolt, foundation bolt, couplers, spring bar 5. Packing: in bundles  6. Delivery: 15-30 days COMPOSITION: The PSB830 thread bar is made of black steel with a continuous left-handed along the entire length of the bar. The continuous threading allows the cut of the bar with different length according to the design requirements.

Dia 63.5mm-555/700Mpa Thread Bar Product Description Thread Bar / Post-Tensioning Bar Grade: PSB555/700Mpa Dia: 63.6mm Length:  12m or as per customers' requirements Technology: Hot rolled, right hand Accessories: full hex nut, spherical hex nut, bearing plate, domed nut, anchor bolt, foundation bolt, couplers, spring bar Packing: in bundles  Delivery: 15-30 days COMPOSITION: The PSB555/700 thread bar is made of black steel with a continuous right-handed along the entire length of the bar. The continuous threading allows the cut of the bar with different length according to the design requirements and it also improves the adhesion between the bar and grouting. Typical Post-Tensioning Bar Applications: 1. Micro pile 2. Marine tie rod 3. Foundation construction 4. Steel or Concrete Structure Connection 5. Soil Nailing 6. Temperory anchor 7. Mining & Tunneling 8. Post-tensioning

T41 cutting wheels are widely used for cutting metal or non-metal materials and removing rust. Our products are of more stability through checks at all levels, which can make maximum precision cut-outs and clean cutting edges with almost no cavities in glazes. Size(mm) Inch Max. Speed Pcs/Ctn G.W.(kg) 100x3x16 4”x1/8”x5/8” 80M/S 400 22 115x3x16 4.5”x1/8”x5/8” 80M/S 200 14 125x3x22 5”x1/8”x7/8” 80M/S 200 18 150x3x22 6”x1/8”x7/8” 80M/S 200 24 180x3x22 7”x1/8”x7/8” 80M/S 120 21 230x3x22 9”x1/8”x7/8” 80M/S 100 28 250x3x25.4 10”x1/8”x1” 80M/S 25 9 300x3x25.4 12”x1/8”x1” 80M/S 25 13 350x3x25.4/32 14”x1/8”x1” 80M/S 25 18 400x3x25.4/32 16”x1/8”x1” 80M/S 25 24

Minimum Order: 5000

T27 grinding wheels are used for polishing material such as steel pipe, armor plate and so on. The work-piece would not be rubified and its surface will become bright and smooth after polished. It is testified that this product is safe and durable. Size(mm) Inch Max. Speed Pcs/Ctn G.W.(kg) 100x6x16 4”x1/4”x5/8” 80M/S 200 22 115x6x22 4.5”x1/4”x7/8” 80M/S 100 14 125x6x22 4.5”x1/4”x7/8” 80M/S 100 18 150x6x22 5”x1/4”x7/8” 80M/S 100 24 180x6x22 5”x1/4”x7/8” 80M/S 60 21 230x6x22 7”x1/4”x7/8” 80M/S 50 27.5

Minimum Order: 5000

T41 Super Thin Cutting Wheels are suitable for cutting hollow-steel tube, high tensile sheets, thin iron plate, armour plate, round bar etc hard metal. These cutting wheels are also used for cutting stainless steel and all kinds of acid proof steels. Size(mm) Inch Max. Speed Pcs/Ctn G.W.(kg) 105x1.2x16 4”x1/21”x5/8” 80M/S 800 18 115x1.2x22 4.5”x1/21”x22” 80M/S 800 19 125x1.2x22 5”x1/21”x7/8” 80M/S 800 20 150x1.2x22 6”x1/21”x7/8” 80M/S 300 16.5 180x1.2x22 7”x1/21”x7/8” 80M/S 300 23 100x2.5x16 4”x7/64”x5/8” 80M/S 300 17 115x2.5x22 4.5”x7/64”x22” 80M/S 240 16 125x2.5x22 5”x7/64”x7/8” 80M/S 300 18 150x2.5x22 6”x7/64”x7/8” 80M/S 200 18 180x2.5x22 7”x7/64”x7/8” 80M/S 150 22 230x2x22 9”x1/12”x7/8” 80M/S 150 27

Minimum Order: 5000

Flexible abrasive wheels are used for steel, stainless steel, mild steel, construction steels, hardened steels, cast steel, grey cast iron, glass, marble, brass, aluminium, Also used for edge grinding, burring, cleaning of weld seams etc. Because of its flexibility, flexible abrasive wheels improve the removal and generate a cool grinding and cutting. Size(mm) Inch Max. Speed Pcs/Ctn G.W.(kg) GC100X3X16 4”x1/8”x5/8” 80M/S 400 22 AC100X3X16 4”x1/8”x5/8” 80M/S 400 22 WA100X3X16 4”x1/8”x5/8” 80M/S 400 22

Minimum Order: 5000

T41 cutting wheels are widely used for cutting metal or non-metal materials and removing rust. Our products are of more stability through checks at all levels, which can make maximum precision cut-outs and clean cutting edges with almost no cavities in glazes. Size(mm) Inch Max. Speed Pcs/Ctn G.W.(kg) 100x3x16 4”x1/8”x5/8” 80M/S 400 22 115x3x16 4.5”x1/8”x5/8” 80M/S 200 14 125x3x22 5”x1/8”x7/8” 80M/S 200 18 150x3x22 6”x1/8”x7/8” 80M/S 200 24 180x3x22 7”x1/8”x7/8” 80M/S 120 21 230x3x22 9”x1/8”x7/8” 80M/S 100 28 250x3x25.4 10”x1/8”x1” 80M/S 25 9 300x3x25.4 12”x1/8”x1” 80M/S 25 13 350x3x25.4/32 14”x1/8”x1” 80M/S 25 18 400x3x25.4/32 16”x1/8”x1” 80M/S 25 24

Minimum Order: 5000