Tools & Hardware

The mobile crushing station is mainly used for metallurgy, chemical industry, building materials, hydropower and other materials that often require relocation operations, especially for mobile stone operations such as highways, railways, and hydropower projects.  The advantages of the mobile crushing station: strong mobility, lower material transportation costs, direct and effective operation, flexible combination, and strong adaptability. Mobile Crusher Machine Description Mobile crusher is a new crushing machine for meeting people's high-standard requirements. The outstanding feature is that the mobile crusher can move freely according to the progress of the project. There is no doubt that the mobile crusher is more convenient than the fixed crushers because of flexible configuration, little space occupation, and classification of material according to different materials and finished products according to demands. Not only that, but the crawler mobile crusher is also equipped with a hydraulic power system, which can automatically control the conveyor to unfold and fold, and the wireless remote control is more convenient and efficient.

The head type has flat head / round head / large flat head /  The hexagonal head and the tail wire have been tested for tension, torque, screwing and salt spray, and fully meet the requirements of the corresponding standards. The tail of the drill tail nail is mostly in the shape of a drill tail or a sharp tail, which quickly occupies the market due to its simple use and easy operation. The drill tail nail can be used for drilling holes on various basic materials to realize quick splicing and assembly, has strong adhesive force, is not easy to loosen and fall off, is very simple and convenient to use, and has high safety factor. In construction and decoration projects, various materials can be tightly combined, resulting in less cost and higher reliability. It is the most economical metal fastener. Widely applicable to various fields and materials. The following points are the product drill tail wire features: 1.It has good toughness: SUS410 with low carbon content is adopted and heat treatment technology is adopted to avoid fracture caused by hard inside of the drill tail nail. 2.Corrosion resistance 3.Bright and beautiful appearance: The surface of the drill tail nail is silvery white, and the head is as bright as a mirror. 4.High Strength: After heat treatment, the surface hardness of the drill tail nail can reach above HV580-HV750, thus completing the fastening process of self-drilling and self-tapping teeth more quickly and at one time. Greatly save time and improve work efficiency.

0.9mm diameter,Unlimited height,the black tie wire Cutting wire is to cut off various metal wires such as bright iron wire, fired wire, electro-galvanized wire, hot-dip galvanized wire, plastic-coated iron wire, painted iron wire, etc. according to customer requirements. Golden Deer Cutting wire is made of annealed wire, galvanized wire, coated wire, paint wire and other wire, according to customer requirements straighten the cut after the cut. Products with easy to transport, easy to use features. Widely used in the construction industry, handicrafts, daily civilian and other fields. According to the specific requirements of customers,processing customized all kinds of special specifications products. black tie wire Description 1.Cut wire is a kind of tie wire made with iron wire cutting to certain sizes after being straightened. It is made with galvanized iron wire straightened then cut into pieces of various length according to your requirement.

Golden Deer Bearings are a crucial tribological component of many types of machinery and exist in a variety of forms and shapes. They can be defined as a component that supports/permits only a specific type of motion (restriction of degrees of freedom) in a system that may be under static or dynamic loading. The main purpose of bearings is to prevent direct metal to metal contact between two elements that are in relative motion. This prevents friction, heat generation and ultimately, the wear and tear of parts. It also reduces energy consumption as sliding motion is replaced with low friction rolling. They also transmit the load of the rotating element to the housing. This load may be radial, axial, or a combination of both. A bearing also restricts freedom of movement of moving parts to predefined directions as discussed above.

Golden Deer Top support, the building is used for the bottom and top supports of the scaffolding. Both the top and bottom supports are adjustable for the integrity of the screw. The screw consists of a screw, a nut, a ball, a preloader, a commutator and a dust protection device. Its function is to convert rotary motion into linear motion, which is a further extension and development of Akem screw. An important aspect of this development is the change from sliding to rolling motion of the bearings. Top support Description The upright pole and the crossbar connecting the upright pole are connected by a roulette wheel at the position where the upright pole is connected to the crossbar, with a jack on the roulette wheel and a crossbar plug perpendicular to the crossbar at both ends of the crossbar. The crossbar plugs and the wheels connect the crossbar to the riser bar in a way that is not only very stable but also easy to install. When erecting wheeled scaffolding, the crossbar plugs can be inserted directly into the sockets of the wheel, and the connection of the plugs and sockets is self-locking, making it more stable during construction. The connection structure of the plugs and sockets is self-locking, making it more stable during construction.

1.5kg,1.6kg ,1.7kg ,2kg Scaffolding fasteners, Used for fixing steel pipe scaffold with outer diameter of 48mm Scaffolding fasteners Description considerably longer than is need when the nut has been tightened. This excess length is required to allow the clamp half to be opened even while the nut is retained on the screw. To do so, the screw and nut arrangement engages a slot in the clamp half. This excess length of screw then protrudes into the area around the scaffolding system where it can cause a considerable hazard to people and equipment. For example, an operative walking pass the clamp can snag a part of their body or a part of their equipment on the screw, causing direct injury or indirect injury, perhaps when a loose strap catches on the screw and pulls the operative off balance, or causes an item of equipment to fall towards the ground where it could hit another operative but also at least damage the equipment and other equipment/supplies on the ground. A falling operative could hit one of these clamps in particular the protruding screw and cause considerable harm to him/herself. Furthermore, over time the end of the screw can become damaged and sharp edges or burrs can be generated which further increase the harm that this excess of screw length can inflict on an operative. A member of the public walking past or underneath a scaffolding assembly can inadvertently catch himself on the protruding screw and the responsible authority (operator) must consequently spend a considerable amount of time assessing and mitigating the hazards caused by scaffolding clamps where the public may need to come close to scaffolding. A system which mitigates such a hazard from the start may therefore confer considerable time savings and hazard-related savings on the operator.

Steel formwork is used for concrete pouring. In addition to steel formwork, there are wooden formwork, plywood formwork, etc.      Golden Deer Steel formwork is widely used in construction projects due to its multiple use and beautiful appearance of concrete pouring. Steel formwork Description 1. Steel formwork:Golden Deer Formwork is a mould used to receive concrete in plastic form. The template is a temporary structure, so it is usually not displayed on the drawing. Formwork for beams and floors 2. Definition: It is an artificial support provided under and around precast or cast-in-place concrete works. The template is usually made of steel or wood. Formwork construction and casting are crucial in the concrete industry. It bears a lot of specific costs. 3. The quality of the template: Waterproof, it should be sturdy and reusable, and the contact surface should be even, according to the size of the component. 4. Types of templates: There are two main types of templates: steel template, wooden template, steel template Steel plate angle iron, tee iron, wooden template made of props, wooden slats, ledger, sheet

1. Product description The profile KDAS double-acting piston sealing set consists of an elastomer sealing com ponent, two anti-extrusion and two angular guide rings. It is suitable for petroleum-based hydraulic oil, flame-retardant hydraulic oil, environmental safety hydraulic (biological oil), water and others, depending on the sealing material. 2. Application range Material: PU,NBR,NBR 3. Range of application Sealing set for double-acting pistons in presses, drive cylinders, back-up and operat- ing cylinders for industrial and mobile hydraulics. Operating pressure ≤400 bar Operating temperature -35°℃ to +100℃ in HFA, HFB and HFC fluids +60°℃ Sliding speed ≤0.5 m/s Rubber component: Highly wear-resistant NBR-compound NB078 with a hardness of 80 Shore A. Anti-extrusion rings:High-strength, wear-optimized polyester elastomer (W5035). Angular guide rings: Thermoplast for high pressure resistance even with increased temperatures(W5301). 4. Size Chart Size ΦD Φd Φd1 Φd2 L L1 50*34*31.1 50 34 45.4 48.5 18.4 6.35 55*39*31.1 55 39 50.4 53.5 18.4 6.35 60*44*31.1 60 44 55.4 58.5 18.4 6.35 63*47*31.1 63 47 59 61.5 18.4 6.35 70*50*35.1 70 50 64.2 68.3 22.4 6.35 75*55*35.1 75 55 69.2 73.3 22.4 6.35 80*60*35.1 80 60 74.15 78.3 22.4 6.35 80*62*29.7 80 62 76 79 22.5 3.6 90*70*35.1 90 70 84.15 88.3 22.4 6.35 95*75*35.1 95 75 89.15 93.3 22.4 6.35 100*75*35.1 100 75 93.15 96 22.4 6.35 110*85*35.1 110 85 103.1 108 22.4 6.35 120*95*35.1 120 95 113.1 118.1 22.4 6.35 125*100*38.1 125 100 118.1 123 25.4 6.35 140*115*44.4 140 115 132.6 137.5 25.4 9.5 140*115/1*38.1 140 115 133 138 25.4 6.35 160*130*38.1 160 130 153 157.5 25.4 6.35 160*135*44.4 160 135 152.6 157.5 25.4 9.5 170*145*50.8 170 145 161.7 167.1 25.4 12.7 180*155*50.8 180 155 171.7 177.1 25.4 12.7 The above models are only some products. If you need other models, please contact customer service 5. Product section view ZW KDAS Loader Crane Obstacle Remover Piston Oil Seal NBR PU POM 0 6. Factory and packaging ZW KDAS Loader Crane Obstacle Remover Piston Oil Seal NBR PU POM 1ZW KDAS Loader Crane Obstacle Remover Piston Oil Seal NBR PU POM 2

Description: ※Made from high quality carbon steel. ※It can cut through thin board, plastic board, etc. ※Mainly for hand operation. ※Size in metric or inch are both available. ※1/4" hex shank [ made in one piece ] is also available. https://www.urusonline.com/produ , ct/hollow-punch/hollow-punch.html

Minimum Order: 1000

Dual Energy Imaging X Ray Baggage Screening Machine / Security Inspection System

pipe, plate, flange, fitting, bar, coil, beam, fitting, structural steel

10 tonne Four Layers Eye and Eye Polyester Webbing Sling High Strength Heavy Lift Flat Web Sling Description We can manufacture and supply in the standard Eye and Eye Web Sling format: single layer, double layers, three layers and four layers. The slings offer superior cut resistance and abrasion resistance properties to extend the life of sling. Polyester webbing slings are slowly and progressively gaining the market share worldwide because of their unique features. They are a cheaper alternative to the traditional slings that have been used till date. Flat Web Slings are popular type and are suitable for a wide range of lifting applications, as they are as strong as steel wire rope or chain, and are yet lighter and more flexible in the same lifting capacity. They can be especially suitable for lifting expensive or easily damaged products, due to their soft and safe material. Eye and Eye Webbing Slings are common type of slings which have eyes sewn into both ends of the sling. The slings can be configured with either a flat eye or twisted eye on both ends. A flat eye can be used in a choker hitch, basket hitch, or vertical hitch, while a twisted eye sling has eyes that are twisted 90° to form a better choker hitch. Our Four Layers Eye and Eye Webbing Slings are manufactured and supplied in accordance to EN 1492-1:2000, AS 1353.1-1997 or JB/T 8521-2007 Standards which stipulates colour code, labelling and how the sling is sewn together. In order to guard the webbing from unnecessary wear and tear, several coverings are available, in any length, which protects both the sling and fragile loads. Sling eyes are automatically tapered to a narrower width ranges from 25mm to 300mm on the Four Layers Eye and Eye Web Sling. These slings are used by crane and rigging customers around the world provide for the low profile eye available, which enables sling removal easier when tight clearances are unavoidable. 150mm 8:1 Polyester Webbing Sling Eye And Eye , Four Layers 10 Ton Lifting Straps 0 The advanced manufacturing of webbing slings, photo by Shanghai Anfeng Lifting & Rigging

3M x 19mm Gravity Feed Delivery Hose and Nozzle Kit with IBC Adapter 3M Gravity Feed Delivery Hose/Nozzle Kit with IBC Adapter Manual Nozzle:Polypropylene (PP) SS Wire Hose Length:3M SS Wire Hose ID:19mm Adapter:IBC DIN 61 No electric pump required Exporting Packing:1PC/BOX,10PCS/CTN G/N Weight:15/13.2KGS Carton Size:70 x 35 x 60cm

Minimum Order: 100

Liquid transfer siphon pump kit / Double action Inflating fueling hand pump GT126 Hand Siphon Oil Transfer Pump Capacity: 200cc Tube Inner Dia: 8mm Tuber Outer Dia: 12mm Intake Hose Length: 1.3m Discharge Hose Length: 1.3m Additional Hose Length: 1.2m Inner Dia of Additional Hose: 3mm Outer Dia of Additional Hose: 5mm Discharge Flow: 5L/Min Net Weight: 592g Specifications 1 ). Intake and discharge transfer system 2 ). Transfer liquids rapidly 3 ). Pumps air or any liquid Application 1 ). Transferring gasoline from car to jerry can 2 ). Transfering gasoline from jerry can to car 3 ). Transferring gasoline from car to car Ideal companion to Lawn machine,brush breaker,hedge trimmer and other small gasoline powered tools. To save your trouble of lining up at gas station. Gas can be pumped into the lawn mower from car only by a few pumping. Packing: 1PC/BLISTER PACK, 12PCS/CTN Carton Size: 56 x 28 x 37cm N.W/G.W: 7/8KGS

Minimum Order: 100