Tools & Hardware

New JCID Non-removal Face ID Repair FPC flex cable Fixes iPhone X-12 PRO MAX Face ID issues without soldering. JCID solder-free dot matrix flex cable used with JCID V1SE/V1S Pro for iPhone Face ID repair. JCID iPhone X-15 Pro Max Dot Matrix Face ID activation read write board. Note(important): 1. New JCID Face ID non-removal FPC flex cable needs to use the new JCID iPhone X-14 Pro Max dot matrix face ID activation read write board. 2. New JCID iPhone X-15 Pro Max Dot Matrix board(no need external power supply) only supports JC V1SE/JCID V1S Pro programmer. Features: 1. Repair iPhone X-12 Pro Max Face ID without soldering and alignment. 2. For iPhone X-12 Pro MAX Face ID repair, no dismantling of optical components, no alignment, no welding. 3. New JCID dot projector Face ID repair flex cables for iPhone X/XS/XS MAX/XR/11/11 Pro/11 Pro Max/12/12 Pro/12 mini/12 Pro Max. 4. JCID newly Face ID repair FPC flex cables can be used with JCID V1SE/V1S PRO. 5. JCID new iPhone X-15 Pro Max Dot Matrix Face ID activation read write board. Instructions: 1. Read the original iPhone Face ID data with JCID V1S/V1SE/V1S Pro and write it into the non-removal Face ID repair flex cable. 2. Activate the original Face ID module with V1SE/V1S PRO. 3. Connect the non-removal Face ID repair flex cable and install.

Minimum Order: 1 bags

Applications Of Non-Sparking Hand Saw : Non-sparking hand saw for use in petrochemical, grain production (explosive- dust), utilities, and hazmat applications. Non-magnetic hand saw for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion Resistant hand saw for use in desalination plants, chemical/paper manufacturing, and shipyards. When selecting the right alloy for your non-sparking, non-magnetic safety tools, you have two choices: copper beryllium tools or aluminum bronze tools.  The Factors to choose the material: Different zones require certain alloys. Our copper beryllium tools fulfil ATEX requirements for work in a number of zones, including 0, 1, and 2 (for gas, mists, or vapors); 20, 21, and 22 (for dusts); and M1 and M2 (mining).  aluminum bronze tools are appropriate for work in zones 1 and 2, and 21 and 22.  Beryllium copper tools can handle more environments. Hardness Our aluminum bronze alloy tools have a hardness of 25HRC. If your application requires a tool with higher hardness rating, copper beryllium equipment, with an HRC of 35, is a good choice. Beryllium copper tools are extremely durable, due to the alloy’s tensile strength and high hardness. Aluminum bronze tools, because of their chemical composition, are not as durable as copper beryllium equipment. Magnetic properties Aluminum bronze equipment features low magnetism due to its minimal ferrous composition. Beryllium copper tools have a more non-ferrous composition, so this equipment is safer for applications that require non-magnetic properties Application remarks: Non sparking tools are softer than usual tools. The operation with these tools has to be carried out with accuracy and care. Overstraining has to be prevented. Only using spark-free tools as a protection measure in fi e endangered and explosion endangered areas is not enough. Please consider the instructions of local health and safety regulations for the protection of employees and accommodation.

Applications of Impact Sockets, 6-Point, 1-1/4" Drive, Non-sparking Non-sparking impact sockets, especially those with a 6-point design and a 1- 1/4" drive, are specialized tools designed for use in potentially explosive environments where the presence of flammable gases, vapors, or dust could pose a safety hazard. Here are some applications where these sockets are commonly used: Oil and Gas Industry: Non-sparking impact sockets find extensive use in the oil and gas industry, particularly in environments where there is a risk of flammable gases. This includes drilling operations, refineries, and petrochemical plants. Chemical Plants: In chemical processing plants where volatile substances are handled, using non- sparking tools is crucial to prevent sparks that could ignite hazardous materials. Mining Operations: Mines often have conditions where combustible gases or dust may be present. Non-sparking tools, including impact sockets, are employed to reduce the risk of ignition during maintenance and repair work. Aircraft Maintenance: Non-sparking tools are used in aircraft maintenance, especially in areas where fuel or other flammable materials are present. The 6-point design ensures a secure grip on fasteners, reducing the risk of slippage. Refineries: Refineries deal with highly flammable substances. Non-sparking impact sockets are employed during maintenance tasks to ensure worker safety. Marine and Shipbuilding: In shipbuilding and repair, where the presence of fuel and other combustible materials is common, non-sparking tools are utilized to minimize the risk of fire. Power Plants: Power generation facilities, particularly those using combustible fuels, utilize non-sparking tools to reduce the risk of accidents during maintenance and repair work. Pharmaceutical Industry: Certain processes in the pharmaceutical industry involve the handling of flammable substances. Non-sparking tools are employed in these environments to maintain a safe working environment. Grain and Flour Mills: Dust from grains and flours can be highly explosive. Spark-free hand tools are used in these environments to prevent the risk of ignition during maintenance and repair activities. Confined Spaces: Non-sparking impact sockets are often used in confined spaces where the accumulation of flammable gases is more likely, such as storage tanks, silos, and pipelines. It's important to note that the use of non-sparking tools is a safety measure to mitigate the risk of ignition, and proper training and adherence to safety regulations are essential when working in potentially explosive atmospheres.

Our premium Non-Sparking Combination Wrench, designed for enhanced safety and efficient operation in hazardous environments. This versatile tool is essential for professionals working in industries where flammable substances are present. With its exceptional features and top-quality construction, our Non-Sparking Combination Wrench ensures a reliable and secure grip, providing peace of mind during critical operations. 1. Die Forged: Our Non-Sparking Combination Wrench is meticulously crafted using the die forging process. This manufacturing technique guarantees superior strength, durability, and resistance to wear and tear, making it a reliable choice for demanding tasks. 2. Wrench Tilts 15 Degrees for High-Efficiency Operation: The innovative design of this wrench includes a 15-degree tilt, allowing for effortless and efficient operation. This ergonomic feature minimizes hand fatigue and provides optimum leverage, enabling you to accomplish tasks with greater ease and speed. 3. Both ends fit same sized nuts and bolts. Properties of Beryllium Copper Alloy: Beryllium copper is a well-known high performance metallic alloy. The mere addition of 2% beryllium to copper produces an alloy that is almost 600% stronger than copper alone. It combines the favorable features of copper alloys with high tensile strength. Additionally, it can be hardened or softened by simple heat treatment processes. It has some mechanical properties that are similar to strong alloy steel tools. In the oil & gas and coal mining industries, where non-sparking properties are needed, tools made from beryllium copper are preferred over steel tools.

Types of brass hammers we supply: Brass ball peen hammer Brass mallet hammer Brass claw hammer Why use a brass sledge hammer? The main reason to use a brass hammer is to not mark or damage the steel surface. Because the metal is softer, it is far less likely to damage items such as sheet metal that are crafted from steel. This means when steel needs to be reshaped, a brass hammer can do the job without causing damage. Additional reasons include the properties of a brass hammer, which makes it non-magnetic, non-marring, and non-sparking.

SK263A Non-sparking square shovel is suitable for digging, lifting and moving materials such as flammable and explosive medicines and granular chemicals. The non-sparking shovel is safe and excellent for use in hazardous environments.The Beryllium Copper shovel and Aluminium Bronze shovel reduces the risk of producing potentially dangerous ignitable sparks. Its handle is mostly made of imported beech wood to attain durable and robust features, though fiber-reinforced plastic handle is also available. The precision-forged shovel head has also been subjected cold rolling process to enable it to be mechanically strong and stable in addition to being long- lasting. Specification of SK263A Non-Sparking Square Point Shovel SK263A  Shovel ,Square NO. B(mm) H(mm) Be-Cu(g) Al-Cu(g) 263A-1002 990 240 420 1800   Beryllium Copper Alloy Square Shovel is non-sparking, non-magnetic, and corrosion resistant. Our safety hand tools are manufactured from special Aluminum-Bronze or Copper-Beryllium alloys for safe use in Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present.Appropriate applications include oil drilling platforms, petrochemical plants, oil refineries, natural gas installations, ammunition plants, varnish factories, sugar refineries, grain silos, mining and other industries where non-sparking safety tools are required. The non-magnetic feature of these alloys also makes them ideal for working on special machinery with powerful magnets such as MRI machines, military de-mining and explosives.

Energysplendor is an experienced manufacturer and supplier of ev charging stations, focusing on smart city business and helping global customers deploy marketable smart electric vehicle charging solutions. We deploy infrastructure that meets the needs of the next generation of smart travel and provide a full range of AC and DC charging stations that support European IEC standards, American SAE standards, Japanese Chademo and Chinese national standards. The products have dozens of patents and have passed CE, TUV, CSA, FCC and other certifications, covering 3.5-44KW AC charging stations, 60-360KW DC charging stations, as well as DC ev charger modules, ev charging cables, ev charging adapters and other accessories. You can customize the appearance and specific technology features to meet the needs of commercial, residential and fleet operators.

Minimum Order: 1 bags

Diamond core drill set are an essential tool for construction professionals who need to create precise and straight holes in reinforced concrete surfaces. They feature a unique design that incorporates diamond segments, while also ensuring minimal vibration during operations. Super thin core diamond bit for reinforced concrete are used extensively in the construction industry for applications such as plumbing, electrical wiring, and HVAC installation in reinforced concrete surfaces. These diamond core bit are a reliable, high-performance tool for professionals who require efficient cutting with minimal damage to surrounding surfaces. What Are The Advantages Of Using A diamond coring drill bit? Using a core drill bits for concrete offers numerous advantages. Firstly, it allows for clean and precise drilling of large-diameter holes or cores in concrete, masonry, or other hard materials. The diamond-coated segments on the drill bit provide exceptional cutting power and durability. diamond core drill bit are designed to handle tough materials and offer faster and more efficient drilling compared to standard drill bits. They also produce minimal dust and vibration, making them safer and more comfortable to use. Additionally, concrete core drill bits are available in various sizes and can be used with specialized drilling machines, ensuring versatility and compatibility for different applications and projects. For more information about polishing pads for concrete, please feel free to contact us!

Minimum Order: 1 bags

Diamond concrete cutting blades are specialized cutting tools designed for precise and efficient cutting of concrete blocks. These blades are typically equipped with diamond segments that can withstand the hardness of concrete, ensuring clean and accurate cuts in various block materials used in construction and masonry applications. Maintaining Diamond Concrete Saw Blade for Optimal Performance Maintaining diamond blades for concrete for block is essential to ensure their optimal performance and longevity. Here are four tips for proper maintenance: 1. Regular Cleaning: After each use, clean the blade thoroughly to remove concrete residue, dust, and debris. Use a wire brush or compressed air to clean the segments and ensure they remain free of buildup. 2. Keep the Blade Sharp: Inspect the blade regularly for signs of wear and damage. If you notice segments becoming dull or damaged, have the blade professionally sharpened or replaced. A sharp blade is essential for efficient and precise cutting. 3. Proper Lubrication: If your concrete blade is designed for wet cutting, ensure that the water supply system is functioning correctly. Proper lubrication helps cool the blade and reduce friction, extending its lifespan. 4. Storage and Handling: Store the blade in a dry and clean environment to prevent rust and corrosion. Use blade guards or covers to protect the blade during storage and transportation. Handle the blade with care to avoid dropping or damaging it. By following these maintenance tips, you can maximize the performance and lifespan of your concrete blade for block cutting, ensuring consistent and efficient results in your construction and masonry projects. For more information about demo saw blade, please feel free to contact us!

Minimum Order: 1 bags

Diamond concrete blade is specialized tools designed for precise cutting of concrete surfaces, including floors, slabs, and pavements. They feature high- quality diamond segments for durability and efficient cutting, making them essential for construction, renovation, and repair projects where accurate and clean cuts are required for a smooth and level surface. Benefits of Diamond Concrete Blade Concrete cutting blades designed specifically for floors offer several benefits, making them essential tools in construction and renovation projects. Here are five key advantages: 1. Precision Cutting: These blades are engineered to deliver precise cuts in concrete floors, ensuring accuracy and smoothness, which is crucial for achieving level and even surfaces. 2. Efficient Material Removal: Concrete cutting blades efficiently remove excess material, such as uneven or damaged concrete, allowing for effective floor repair, resurfacing, or modification. 3. Durability: These blades are typically made with high-quality materials, including diamond segments, that are highly durable and capable of withstanding the abrasiveness of concrete surfaces, resulting in longer blade life. 4. Reduced Dust and Debris: Many floor-specific concrete cutting blades are designed with features that minimize dust and debris generation during cutting, contributing to a cleaner and safer work environment. 5. Time and Cost Savings: The precision and efficiency of these blades can significantly reduce project completion times and associated labor costs, making them a cost-effective choice for concrete floor cutting tasks. In summary, concrete cutting blades designed for floors offer precise, efficient, and durable cutting performance, leading to cost savings and improved work safety while ensuring high-quality concrete floor finishes. For more information about diamond cutting blade, please feel free to contact us!

Minimum Order: 1 bags

Diamond circular saw blade is a specialized cutting tool designed for use with circular saws and angle grinders. It features turbo-style diamond segments for efficient cutting of concrete, brick, and masonry materials. The arrow-shaped segments enhance debris removal, ensuring fast and precise cuts in construction and renovation projects. Functions of The Diamond Circular Saw Blade The Arrow Turbo Concrete Blade For Cutter serves multiple functions in construction and masonry applications, thanks to its unique design and capabilities. Here are four key functions: 1. Fast and Efficient Cutting: The turbo segment design of the blade enhances cutting speed and efficiency, allowing for quicker and more productive cutting through concrete and masonry materials. 2. Clean and Precise Cuts: These angle grinder blades for concrete are known for their ability to deliver clean and precise cuts, resulting in smooth and accurate edges on various surfaces. 3. Versatility: Arrow concrete circular saw blade are versatile and can be used for cutting a range of materials, including concrete, brick, stone, tile, and block, making them suitable for a variety of construction tasks. 4. Reduced Heat and Friction: The turbo design also helps dissipate heat and reduce friction during cutting, preventing overheating and ensuring a longer blade life. These functions make Arrow masonry circular saw blade valuable tools in construction and masonry projects, where efficient and precise cutting is essential. For more information about diamond cutting blade, please feel free to contact us!

Minimum Order: 1 bags

Core Drill Bits are drilling tools and diamond drilling bits are one of its subcategory, which used to create circular holes in concrete walls, floors, and other solid surfaces. These bits have a hollow cylindrical shape with diamond- tipped teeth on the edge to provide precision drilling.Concrete Core Bits come in various sizes and can be used in hand-held drills, high-speed drill rigs or even electric saw equipment, enabling precision borehole cutting or coring in different construction roles, such as plumbing, electrical conduit installation or building renovation projects The Advantages of Using Core Drill Bit for Geotechnical Exploration and Sampling Core bit sets are drilling tools and core diamond drill bit are one of its subcategory, which used to create circular holes in concrete walls, floors, and other solid surfaces. These bits have a hollow cylindrical shape with diamond- tipped teeth on the edge to provide precision drilling.Concrete Core Bit come in various sizes and can be used in hand-held drills, high-speed drill rigs or even electric saw equipment, enabling precision borehole cutting or coring in different construction roles, such as plumbing, electrical conduit installation or building renovation projects. Advances in Laser-Welding Technology for Core Drill Bit Recent advances in laser-welding technology have improved the durability and performance of concrete core bits. Laser-welded segments provide a stronger bond between the diamonds and the bit's core, resulting in longer lifespan and higher speed. Additionally, laser-welding technology enables manufacturers to design unique patterns and configurations of diamond segments, further enhancing the bit's drilling efficiency and precision. The Possibilities for Using Recycled Materials in the Production of Core Drill Bit The use of recycled materials in the production of concrete core bit diamond offers numerous possibilities. By incorporating recycled aggregates, such as crushed concrete or reclaimed asphalt pavement, into the manufacturing process, the environmental impact of core drill bit production can be reduced. These recycled materials can provide similar performance characteristics to traditional aggregates, while also conserving natural resources and diverting waste from landfills. Additionally, the use of recycled materials can contribute to the circular economy by promoting the reuse and repurposing of materials. Overall, integrating recycled materials into the production of coring drill bit presents a sustainable and innovative approach to construction tool manufacturing. For more information about diamond cut blades, please feel free to contact us!

Minimum Order: 1 bags

A Concrete Rope Saw is a cutting tool that uses a diamond-coated wire rope that moves continuously through the saw, allowing for efficient and precise cutting of very thick or dense materials such as concrete, steel, or rock. This flexible wire sawing can be used in areas where traditional saws can't reach or are impractical, such as narrow spaces, curved shapes, or in hazardous environments. Understanding the Physics and Mechanics of Concrete Wire Saw A Concrete Rope Saw is a cutting tool that uses a diamond-coated wire rope that moves continuously through the saw, allowing for efficient and precise cutting of very thick or dense materials such as concrete, steel, or rock. This flexible wire sawing can be used in areas where traditional saws can't reach or are impractical, such as narrow spaces, curved shapes, or in hazardous environments. How to Overcome Common Challenges when Using a Concrete Wire Saw To overcome uneven cutting, adjust the cutting speed and water flow, and ensure the saw's blades are straightened. Overheating is caused by friction and improper use. To avoid motor overheating, make sure the concrete wire saw is not overloaded, use the correct cutting depth, and regularly clean the saw's air filters. Diamond abrasives can easily be lost due to wear and tear. Replace the diamond rope frequently after it has lost its laser weld or when it becomes dull to prevent tool inefficiency. An unbalanced concrete wire saw can lead to inaccurate cutting and reduce the lifespan of the saw. To overcome this challenge, make sure the saw blades are properly installed and the saw is regularly calibrated for balance. Future Trends and Innovations in Concrete Wire Saw The future of Concrete Wire Saw technology is looking bright. Innovations such as remote-controlled wire saws, machine learning-powered cutting, and environmentally friendly coolant systems are already in development. Advancements in diamond wire manufacturing technology may also lead to stronger and longer-lasting wire, resulting in more efficient cutting technologies. For more information about diamond cutting blades, please feel free to contact us!

Minimum Order: 1 bags

A concrete diamond saw blade, also called cement saw blade, is a cutting tool with a steel core embedded with diamond particles through sintering, welding, or vacuum brazing. They are used to cut hard materials such as concrete, masonry, and asphalt. Depending on the application, they come in different sizes and thicknesses, with diameters ranging from 4 to 64 inches and thicknesses ranging from 0.1 to 0.5 inches. The Benefits of Laser Welded Concrete Saw Blades for Cutting Concrete A concrete saw blade, also called cement saw blade, is a cutting tool with a steel core embedded with diamond particles through sintering, welding, or vacuum brazing. They are used to cut hard materials such as concrete, masonry, and asphalt. Depending on the application, they come in different sizes and thicknesses, with diameters ranging from 4 to 64 inches and thicknesses ranging from 0.1 to 0.5 inches. How to Use Concrete Saw Blades? Using concrete demo saw blades involves proper selection of the blade for the cutting application and ensuring that the blade is suitable for the saw's arbor size. Once the blade is mounted on the saw, proper safety measures must be taken, such as using protective goggles and earplugs, and wearing appropriate work gloves and clothing. During cutting, it is essential to guide the concrete saw blade along the intended path using a straight edge or guide. Maintaining a steady and controlled feed rate is crucial to ensure a clean and precise cut, and excessive force or pressure should not be applied. After cutting, the concrete saw blades should be cleaned and inspected for damage, worn segments, or loose nuts. Diamond-coated blades should be stored appropriately to avoid damage to the diamond segments. Attention to these factors can significantly improve the performance and lifespan of a concrete saw blade. How to Store Concrete Saw Blades? Proper storage of concrete saw blades is essential to ensure their longevity and optimal performance. Here are some steps for concrete saw blade storage: 1. Clean the blade: Ensure the concrete saw blade is clean and free of any debris, dust or moisture. 2. Protect the blade: Use blade protectors to prevent the blade from being damaged or scratched while in storage. 3. Store in a dry place: Store concrete saw blades in a cool, dry place to minimize the risk of corrosion. 4. Store vertically: Keep the blades stored vertically or flat to prevent shape deformation and distortion. 5. Label and organize: Label the blade protectors or boxes with the size, type, and date of the blade. Organize the blades by size and type for ease of use. By following these simple storage tips, users can extend their saw blades' lifespan and optimize their performance for future use. For more information about diamond blade concrete, please feel free to contact us!

Minimum Order: 1 bags