TL-4 model Direct burning furnace with 3 layers sleeve

The TL-4 burning furnace consists of 3 layers of cylinders. It uses fully
burned natural gas to obtain high-temperature flame, and mixing this
temperature with fresh air to achieve the required hot air device. Due to
the use of fully automatic single-stage fire, two-stage fire or modulating
burner, the output hot air is extremely clean by natural gas fully burned, ,
meeting the drying and dehydration needs for most stuffs. The external fresh
air enter the furnace body under negative pressure, takes two strokes and
sequentially cools the middle cylinder and the inner tank. After being fully
mixed with the high-temperature flame in the mixing zone, it is extracted
from the furnace body and enter the drying room. When the temperature reach
the setting number, the main burner stops working and the auxiliary burner
continues to burn to maintain the temperature. When the temperature drops to
the set lower limit temperature, the main burner will be run again.
4、Advantages/features
1. Simple structure and easy installation
2. Small air volume, high temperature, adjustable from normal temperature to
500℃
3. Stainless steel high temperature resistant inner tank, durable
4. Automatic gas burner, complete combustion, high efficiency. (After
setting up, the system can control the ignition+cease fire+temperature
adjust automatic),
5. The fresh air has a long stroke that can fully cool the inner tank, so
the outer tank can be touched without insulation.
6. Equipped with high temperature resistant centrifugal fan, large pressure
center and long lift

Minimum Order: 1 sets

Click to Enlarge