UL Standard EMT Conduit Pipe 1 Inch 3 / 4 Inch Electrical Metal Conduit

Product description

UL Standard 3/4 Inch 1 Inch Electrical Conduit Metal Wire Tube EMT Conduit
Pipe



1. Material: EMT conduit is typically made from steel, which can be
galvanized for corrosion resistance. Some versions of EMT conduit are also
available in aluminum.

2. Size: EMT conduit comes in various sizes, typically ranging from 1/2 inch
to 4 inches in diameter. The choice of size depends on the specific
electrical wiring requirements of the installation.

3. Wall Thickness: EMT conduit has a thinner wall compared to other types of
conduit like rigid metal conduit (RMC) or intermediate metal conduit (IMC).
The thinner wall makes it more lightweight and easier to bend.

4. Bendability: EMT conduit is known for its flexibility and ease of
bending. It can be bent by hand or with specialized tools to navigate
corners and obstacles during installation.

5. Use: EMT conduit is suitable for both exposed and concealed electrical
installations. It is commonly used in residential, commercial, and
industrial settings to protect electrical wiring from physical damage,
moisture, and other environmental factors.

6. Fittings: EMT conduit is typically connected using fittings designed
specifically for EMT, such as EMT connectors and couplings. These fittings
ensure a secure and code-compliant installation.

7. Grounding: EMT conduit can serve as an effective grounding path for
electrical systems when properly installed and connected. It is essential to
follow local electrical codes and regulations for grounding requirements.

8. Code Compliance: EMT conduit must meet specific electrical codes and
standards, which may vary depending on your location. In the United States,
for example, it should comply with the National Electrical Code (NEC).

9. Corrosion Resistance: Galvanized EMT conduit offers good corrosion
resistance, making it suitable for both indoor and outdoor applications.
However, it may not be as corrosion-resistant as stainless steel conduit.

10. Joints and Connectors: EMT conduit joints and connectors are typically
threaded, allowing sections of conduit to be securely joined together.

It's important to note that EMT conduit is not designed for use in hazardous
locations or where extra protection against physical damage is required. In
such cases, more robust conduit types like Rigid Metal Conduit (RMC) or
Intermediate Metal Conduit (IMC) may be used.


Specification
UL standard 3/4 inch 1 inch electrical conduit metal wire tube Pre-
galvanized /Hot-Dipped Galvanized

Trade Size Outside Diameter Wall Thickness Length Packing
inch mm inch mm feet mm Bundle
1/2" 0.706 17.93 0.042 1.07 10 3050 20pcs
3/4" 0.922 23.42 0.049 1.25 10 3050 15pcs
1" 1.163 29.54 0.057 1.45 10 3050 10pcs
1-1/4" 1.510 38.35 0.065 1.65 10 3050 5pcs
1-1/2" 1.740 44.20 0.065 1.65 10 3050 5pcs
2" 2.197 55.80 0.065 1.65 10 3050 5pcs
2-1/2" 2.875 73.03 0.072 1.83 10 3050 1pcs
3" 3.500 88.90 0.072 1.83 10 3050 1pcs
3-1/2" 4.000 101.60 0.083 2.11 10 3050 1pcs
4" 4.500 114.30 0.083 2.11 10 3050 1pcs
Tolerances:Length±0.25"(6.35mm),Outs , ide Diameter1/2"through2"±0.005"
(0 , .13mm),2-1/2"through4"±0.016"(0.41 , mm)
Note:if you need different thickness or length,please contact.

Our Factory

UL Standard 3/4 Inch 1 Inch Electrical Conduit Metal Wire Tube
EMT Conduit applications:

UL standard 3/4 inch 1 inch electrical conduit metal wire tube To protect
and route cables and conductors.Can be used for both exposed and concealed
work,use above ground for lighting circuits, and control lines and other low
power applications.

UL Standard 3/4 Inch 1 Inch Electrical Conduit Metal Wire Tube

Packaging & Shipping
UL Standard EMT Conduit Pipe 1 Inch 3 / 4 Inch Electrical Metal Conduit 2

Click to Enlarge