Wall mount recessed switch box roll forming machine

Metal roll forming machine production line making illumination wall mounted box
dimension.
Superda Machine professional making metal enclosure production line
https://www.superdamc.com
sales@superda , machine.com

Push bottom box length is adjustable from 200-600mm, the width is 190mm, and
the depth is 80mm. The actual cross-section of the product provided by the
customer.



1, Flush mounted box production line technical parameters



No. ITEM PARAMETER REMARK
1 MATERIAL Type Cold-rolled strip steel, galvanized sheet
T.(mm) 0.5-0.7mm
Yield Strength (Mpa) Q235
2 Forming product Width Customized
3 Forming speed (m/min) 4-8m Including hole
4 Forming main power (KW) 7.5 KW FYR
5 Hydraulic power (KW) 18.5 KW FYR
6 Bending power (KW) 3 KW FYR
7 Voltage AC380V，50Hz，3P


Metal roll forming machine production line process

Uncoiler →Straightening→servo feeder→Hydraulic press breach device → Guide
device → roll forming machine → hydraulic punch →shear device (including
knife)→ finished product rack



Steel flush mount enclosure roll Forming machine list



Explaination

This production line is equipment for production flush wall mount enclosure.
The strip coil to be processed is manually placed on the uncoiler, and then
corrected and tensioned. After leveling, it enters the hydraulic pre-punching
and punching notch, and is sent to the forming machine by the guide device to
form. Under the frictional damping action of the forming roller and pressure
roller, after entering the shearing section at a linear speed of 0-10m, the
product is cut off as required, and then manually packed away.

Minimum Order: 1 pieces

Click to Enlarge