Wholesale Laser Welding Diamond Chain For Concrete Chainsaw Quotes

ChinShine, a diamond cutting blade manufacturer a full line of diamond chain
saws for cutting concrete, brick, and natural stone. ChinShine’s diamond chain
saws are similar to regular chain saws, but use laser-welded diamond segments
on the edge of the chain.

Diamond chainsaw is used on gasoline or hydraulic power, and the diamond chain
saws is lubricated with water because of the high friction and removal of dust.

Brand Name: ChinShine
Place of Origin: Quanzhou, Fujian, China
Chain Pitch: 3/8" / 0.45".
Chain Guage: 0.063"(1.6mm)
Raw Material: high-quality imported steel
Fit machine: ICS machine, STHIL machine
Application: concrete, stone, construction material

The chain saw machine is used in construction, for example, to cut deep square
holes in walls or floors, to remove large stones before carving, to enter the
building by the fire department and to repair the building and with minimal
damage to the surrounding structure Monument with parts removed.

Recently, a laser welding diamond chain for concrete chainsaw with a 230-volt
electric motor was also developed. Because the material to be cut is not
fibrous, springback occurs much less.

Therefore, the most commonly used cutting method is plunge cutting, in which
the tip of the blade is pushed into the material. Using this method, a square
cut as small as the blade width can be achieved.

If the concrete block moves when it is almost cut through and clamps the blade,
it may push back, but overall, the concrete chain for chainsaw is less
dangerous than a wood cutting chain saw.

Click to Enlarge