Wine Stainless Steel Tanks , 250BBL Stainless Steel Fermentation Vessel

Fermentation tank Standard configuration :

1) material is SS304

2) Working volume from 1-250BBL

3) Vertical type ( horizontal type is Optional)

4) Top head with 25% extra capacity space

5) Dish top ,cylinder shell body ,60-70 degree con type bottom

6) Shell Side manhole ( top manhole is optional)

7) Double jacketed construction (single layer is optional)

8) Internal surface is 2B finish,outside shell surface is #4 finish

9) Dimple type jacket for Glycol cooling ,with50-80mm PUF insulation layer

10) With hop port at top head

Fermentation tank Accessories: Sample Valve , Pressure relief/vacuum valve ,
Temp. sensor / thermometer , Rotating racking arm with butterfly valve , Bottom
outlet with butterfly valve , CIP rotary spray ball and process pipeline.



Characteristics of beer equipment:

A. the equipment is made of copper or stainless steel, which is gorgeous and
elegant.

B. It can brew various beer drinks such as black beer, yellow beer, red beer,
fruit beer and gevas.

C. simple and flexible operation, low power consumption and small floor area.

D. the production environment is clean, pollution-free, and the wine is
fragrant.

E. high degree of automation, even non brewing professionals can brew superior
beer.



Product Specification

Function: Beer maturation/conditioning/serving/filtered beer receiving
Tank Capacity: 500L (+25% Head space minimum)
Dimension: Φ960x1900mm (Customize)
Interior Shell: SUS304 full welded; TH=3mm
Exterior Shell: SUS304 full welded; TH=2mm
Welding 100% TIG welding with pure argon gas shield
Interior Finish:
Sanitary 2B finish, Pickled and Passivated;

(8K Mirror finish optional)

Exterior Finish: Oil brushed finish(2B, 8K Mirror finish optional)
Polishing Interior full polished to 0.2~0.4 μm without dead corner
Insulation: TH=80mm with low thermal conductivity PU
Cooling: 35% Glycol liquid -5℃
Cooling Jacket: Dimple plate on bottom and side wall, welded without over
burning
Jacket test by water and gas, 5bar/75psi for 1hour, 3.5bar/52psi for 48
hours
Jacket Working Pressure: < 2bar/30psi
Tank leakage test by water and gas, 4bar/60psi for 1hour, 2.5bar/37.5psi
for 48 hours
Tank Working Pressure: 2bar/30psi
Dished Top: Dished top full polished
Dished bottom: With conical insulation
Manway:
Sanitary top mounted oval manhole with pressured door

( side mounted available)

CIP Ball: Top mounted double clamp 360° rotary CIP spraying ball and
port, 1pcs
CIP arm: with four-way connection and butterfly valve
Mechanical safe valve PVRV: 2bar/30psi on top (1bar/15psi available)
Sampling Valve: Full sanitary sampling valve with EPDM seal
Hydraulic shock pressure gauge: on CIP arm (Diaphragm type for optional)
Discharge arm: With butterfly valve, Removable and easy to clean
Thermowell : Sanitary welded thermowell for high accuracy temperature sensor
1pcs
Carbonation: Carbonation port with CO2 dissolved stone 0.22um
Glycol water port:
In/out port on side wall and cone,

Thick wall pipe thread (Top or bottom design available)

Legs:
4pcs completely SUS304 legs with braces,

heavy duty foot pad with up-down and slop adjustable

Accessories: Complete valves, fittings and all parts, Tri clamp/DIN Union
available
Special request
Pressure adjustable bunging valve 0.2-2.2bar ;

Sanitary level tube and valves ;

Click to Enlarge