Z10003 0.96 Inch LCD Display 128*64 4 Lane SPI Interface

Size: 0.96 inch

Resolution: 80*160

Interface: 4 lane SPI

Driver IC: ST7735R

View Angle: IPS

Brightness: 300 cd/m²

Touch Panel: Support CTP/RTP

Supply Type: Factory/Manufacturer

Certification: ISO9001, IATF16949, ROHS, REACH

Overview of Z10003 0.96 Inch LCD Display 128*64 4 Lane SPI Interface

1
Z10003 is a color active matrix thin film transistor (TFT) liquid crystal
display (LCD) with 80*160 resolution. IPS (In-plane Switching) technique make
this 0.96" LCD module have a wider view angle. This LCD display is built-in
ST7735R driver IC. This a-Si TFT LCD come with 4-wire SPI interface.

2
If you have special requirement, like drive IC, interface, FPC, touch panel,
backlight, etc, we can also customize for you.

3
Our factory carry out ISO 9001: 2015 and IATF16949: 2016 quality standard
system strictly, all the LCD display passed ROHS, REACH Certification.

4
The 0.96" LCD screen is widely used smart watch, bracelet, medical oximeter,
cosmetic instrument, household appliance, translator, etc.

Specification of 0.96 Inch LCD Display 128*64 4 Lane SPI Interface

Item Main Display Unit
Number of Pixels 80 * RGB * 160 Pixel
LCM Outline Dimension 13.5 (W) * 27.95 (H) * 1.55 (T) mm
LCD Outline Dimension 13.2 (W) * 26.99 (H) * 0.4 (T) mm
Active Area 10.8 * 21.696 mm
Pixel Pitch 0.0135 *0.1356 mm
Display Mode Normally Black
Pixel Arrangement RGB Vertical stripe
Viewing Direction ALL
Color Configuration RGB
LCD Transmittance Typ: 4.89%; Min: 4.4%
LCD Contrast Ratio Typ: 800; Min: 640
FPC Version Z10003-P12 V1
Interface 4 LINE SPI
Operating Temperature -20℃ ~ 70℃
Storage Temperature -30℃ ~ 80℃
Backlight Arrangement 1 LED
Luminance -
Weight -

Pin Definition of 0.96 Inch LCD Display 128*64 4 Lane SPI Interface

PIN NO. PIN DEF. FUNCTION DECS.
1 GND Ground
2 LED-K POWER SUPPLY- FOR BACKLIGHT CATHODE
3 LED-A POWER SUPPLY+ FOR BACKLIGHT ANODE
4 VCC(3.3V) Power Supply for Analog, VCC 3.3V.
5 GND Ground
6 GND Ground
7 D/C Display data/command selection pin in 4-line serial interface.
8 CS Chip selection pin; Low enable, High disable.
9 SCL This pin is used to be serial interface clock.
10 SDA SPI interface input/output pin. The data is latched on the
rising edge of the SCL signal.
11 RESET(3.3V) This signal will reset the device and it must be
applied to properly initialize the chip. Signal is active low.
12 GND Ground

As a professional china lcd display supplier, Zhunyi has high-quality china lcd
display module for sale. Welcome to contact us if needed.

Minimum Order: 1 pieces

Click to Enlarge