Solar Energy Products

OS-HM72-525W~550W MONO Half Cell Solar panel solar panel suppliers in china 550w solar panel wholesale TYPE OS-HM72-525W OS-HM72-535W OS-HM72-550W Rated Maximum Power (Pmax )[W] 525 535 550 Open Circuit Voltage(Voc)[V] 49.15 49.45 49.9 Maximum  Power Voltage (Vmp) [V] 41.15 41.41 41.96 Short Circuit Current (Isc) [A] 13.65 13.79 14 Maximum Power Current (Imp) [A] 12.76 12.9 13.11 Maximum system voltage 1500VDC Junction Box Protection IP67 Cables 4mm2 Connector MC4 Max wind load 2400Pa Max snow load 5400Pa Operating Temperature -40℃~+85℃ Power Tolerance ±3% Company profile Hebei Oushang Photovoltaic Technology Co., Ltd has focus on solar panel production in China since 2014.The auto production is able to supply 3 containers per day. We have shipped thousands of containers of solar panels to all over the world. Our products are exported to Europe, Middle East, South America, Southeast Asian and Africa. The factory and products are qualified by TUV. Product description: Half cell modules have higher power output, better temperature-dependent performance, less shading effect, and low risk of hot spot.    Half cell advantage: Half cell modules consist of half cells that cut from the ordinary whole cell. One whole sell is cut into two half pieces. Half cell modules have better performance in partial shadow condition. In half cell panels, the power loss is less than that in entire cell panel, since the bypass diodes restrict the loss of power. The by pass diodes creates a substitute path for the current to travel in the unshaded area instead of passing through the shaded parts. How half cell modules work: If an entire solar cell is cut into two half pieces, one half piece produce half as much current and one fourth resistance of the whole piece. Thus, the quantity of cells will be double. If they are wired up to work like a full cell panel, the current will be the same but with half the resistance. The electrical losses would be less due to the lower resistance.   Cells connection type But if the half cut cells were wired together as in a standard full cell panel, they would produce twice the voltage and half the current. To make the output like standard full cell panels, the type of the half cells connection is different. There are two lots of half quantity series-connected cells. These two lots are connected in parallel. Voltages in parallel stay the same and the half cell panel remains the same voltage as the full cell panel. OS SOLAR is a leading solar panel suppliers in china. Its hot selling products include: 72 cells solar panel, 60 cells solar panel, 36 cells solar panel, and provide customized solar panel. the factory has strict quality control, please contact us! https://www.oushangsolar.com/products/o , s-hm72-525w-550w.html

OS-M36-150W~175W Monocrystalline Photovoltaic Module 175w solar panel wholesale customized solar panel Key Parameters Cell MONO No. of cells 36 (4*9) Rated Maximum Power (Pmax)  150W~175W Junction Box IP67 Maximum System Voltage 1000V DC Operating Temperature -40℃～+85℃ Connectors  MC4 Hebei Oushang Photovoltaic Technology Co., Ltd is one of the top solar panel china manufacturers and has been engaged in the research and development, we have advanced automated production lines. If you are interested in customized solar panels, please click here to learn more. https://www.oushangsolar.com/prod , ucts/os-m36-150w-175w.html

OS-P60-250W~270W Polycrystalline Photovoltaic Panel Photovoltaic modules from China Product Description Key Parameters Cell Poly No. of cells 60 Rated Maximum Power (Pmax)  250W~270W Junction Box IP67 Maximum System Voltage 1000V DC Operating Temperature -40℃～+85℃ Connectors MC4 Production We have engaged in photovoltaic modules since 2014. Our factory ships over 150 containers of solar panels to all over the world, Europe, America, Middle east, Southeast Asia and Africa . With years of experience, our strict QC ensure our products to work well under different sunshine condition globally. Hebei Oushang Photovoltaic Technology Co., Ltd is one of the top solar panel china manufacturers and has been engaged in the research and development, we have advanced automated production lines. If you are interested in customized solar panels, please click here to learn more. https://www.oushangsolar.com/prod , ucts/os-p60-250w-270w.html

OS-M60-250W~280W Monocrystalline Photovoltaic Module 60 cells solar panel manufacturer Key Parameters Cell Mono No. of cells 60 Rated Maximum Power (Pmax)  250W~280W Junction Box IP67 Maximum System Voltage 1000V DC Operating Temperature -40℃～+85℃ Connectors  MC4   Model OS-M60-250 OS-M60-270 OS-M60-280 Cell MONO MONO MONO Max Power 250W 270W 280W Max Power Voltage 30.5V 31.5V 31.5V Max Power Current 8.20A 8.57A 8.89A Open Circuit Voltage 36V 38.05V 38.86V Short Circuit Current 9.02A 9.08A 9.22A Number of Cells 60(6*10) 60(6*10) 60(6*10） Size of Cells (mm) 156*156 156*156 156*156 Dimensions(mm) 1640*992*35 1640*992*35 1640*992*35 Maximum system voltage 1000VDC Junction Box Protection IP67 Cables 4mm2 Connector MC4 Max wind load 2400Pa Max snow load 5400Pa Operating Temperature -40℃~+85℃ Power Tolerance ±3%   Hebei Oushang Photovoltaic Technology Co., Ltd has focus on solar panel production in China since 2014.The auto production is able to supply three containers per day. We have shipped thousands of containers of solar panels to all over the world. Our products are exported to Europe, Middle East, South America, Southeast Asia and Africa. The factory and products are qualified by TUV. https://www.oushangsolar.com/products/ , os-m60-250w-280w.html

OS-M72-300W~350W Monocrystalline Photovoltaic Module monocrystalline solar panel supplier 72 cells solar panel Description Key Parameters Cell Mono No. of cells 72 Rated Maximum Power (Pmax)  300W~350W Junction Box IP67 Maximum System Voltage 1000V DC Operating Temperature -40℃～+85℃ Connectors MC4         The factory has more than 7 years solar panel production experience. We shipped thousands of containers of solar panels to all over the world. All the panels are working well under different circumstance globally since our quality control strictly follows ISO9001 standard.         9BB, MBB are both available. Size 156,166 and 182 cells are all available. Our factory is able to do OEM and ODM. We can make the solar panels to meet customers' requirement. Specifications and Details Model OS-M72-300 OS-M72-330 OS-M72-350 Cell MONO MONO MONO Max Power 300W 330W 350W Max Power Voltage 36V 37.8V 37.8V Max Power Current 8.33A 8.73A 9.25A Open Circuit Voltage 43.2V 44.5V 45.6V Short Circuit Current 8.83A 9.40A 9.71A Number of Cells 72(6*12) 72(6*12) 72(6*12) Size of Cells (mm) 156*156 156*156 156*156 Dimensions(mm) 1955*992*35 1955*992*35 1955*992*35 Maximum system voltage 1000VDC Junction Box Protection IP67 Cables 4mm2 Connector MC4 Max wind load 2400Pa Max snow load  5400Pa Operating Temperature -40℃~+85℃ Power Tolerance ±3% OS SOLAR is a leading solar panel suppliers in china. Its hot selling products include: 72 cells solar panel, 60 cells solar panel, 36 cells solar panel, and provide customized solar panel. the factory has strict quality control, please contact us! https://www.oushangsolar.com/products/o , s-m72-300w.html

OS-P72-300W~315W Polycrystalline Photovoltaic Panel PV modules from China poly solar panel supplier Product Description Key Parameters Cell Poly No. of cells 72 Rated Maximum Power (Pmax)  300W~315W Junction Box IP67 Maximum System Voltage 1000V DC Operating Temperature -40℃～+85℃ Connectors  MC4   Model OS-P72-300 OS-P72-310 OS-P72-315 Cell POLY POLY POLY Max Power 300W 310W 315W Max Power Voltage 36V 36.5V 36.8V Max Power Current 8.33A 8.49A 8.56A Open Circuit Voltage 43.2V 43.5V 43.8V Short Circuit Current 8.83A 8.92A 9.07A Number of Cells 72(6*12) 72(6*12) 72(6*12) Size of Cells (mm) 156*156 156*156 156*156 Dimensions(mm) 1955*992*35 1955*992*35 1955*992*35 Maximum system voltage 1000VDC Junction Box Protection IP67 Cables 4mm2 Connector MC4 Max wind load 2400Pa Max snow load  5400Pa Operating Temperature -40℃~+85℃ Power Tolerance ±3% Hebei Oushang Photovoltaic Technology Co., Ltd has focus on solar panel production  since 2014. Our factory is a professional PV modules manufacturer in China. We have shipped thousands of containers of solar panels to all over the world. Our products are all working well under different sunshine conditions. FAQ Question: Is your company manufacturer or trade company? Answer: Manufacturer.   Question: Is sample order available? Answer: Yes.   Question: Is OEM and ODM available? Answer: Yes.   Question: What is your production lead time? Answer: Around 2~3 weeks. OUSHANG SOLAR has engaged R&D, production and sales of solar module products many years. The power range of our solar panels is from 5W to 500W. Products cover monocrystalline solar panel, polycrystalline solar panel, half cell solar modules, solar controller, solar inverter, solar gel battery, solar flood light, solar street light, solar monitor system and etc. We offer OEM service. https://www.oushangsolar.com/produ , cts/os-p72-300w-315w.html

10W～30W Solar Panels solar panel OEM solar panel factory in China custom solar panel manufacturer Product Description We are able to manufacture PV modules according to clients' requirements. All the things about the panel can be customized, cells, frame, color, backsheets, cables, junction boxes, dimensions, connectors, power and etc. The customized solar panels are widely used all over the world, for mobile system, small family solar system, garden solar system and etc.   APPLICATION: Customized Solar panels with small power capacity is widely applied in auto-mobile, traffic control, garden camping and etc. We have customized 10W-30W solar panel types as following:   Model OS-M36-10 OS-M36-20 OS-M36-30 Cell MONO MONO MONO Max Power 10w 20w 30w Max Power Voltage 18.0V 18.0V 18.0V Max Power Current 0.56A 1.11A 1.67A Open Circuit Voltage 21.5V 21.6V 21.9V Short Circuit Current 0.60A 1.17A 1.77A Number of Cells 36(4*9） 36(4*9） 36(2*18） Size of Cells (mm) 52*39 78*52 156*31.2 Dimensions(mm) 260*350*17 350*520*20 650*350*25 Maximum system voltage 1000VDC Junction Box Protection IP67 IP67 IP67 Cables 2.5mm2 2.5mm2 2.5mm2 Connector MC4 MC4 MC4 Max wind load 2400Pa 2400Pa 2400Pa Max snow load 5400Pa 5400Pa 5400Pa Operating Temperature -40℃~+85℃ Power Tolerance ±3%   Model OS-P36-10 OS-P36-20 OS-P36-30 Cell POLY POLY POLY Max Power 10w 20w 30w Max Power Voltage 18.0V 18.0V 18.0V Max Power Current 0.56A 1.11A 1.67A Open Circuit Voltage 21.5V 21.6V 21.9V Short Circuit Current 0.60A 1.17A 1.77A Number of Cells 36(4*9） 36(2*18） 36(2*18） Size of Cells (mm) 52*39 78*52 156*31.2 Dimensions(mm) 260*350*17 350*520*20 650*350*20 Maximum system voltage 1000VDC Junction Box Protection IP67 IP67 IP67 Cables 2.5mm2 2.5mm2 2.5mm2 Connector MC4 MC4 MC4 Max wind load 2400Pa 2400Pa 2400Pa Max snow load 5400Pa 5400Pa 5400Pa Operating Temperature -40℃~+85℃ Power Tolerance ±3% OS SOLAR is a leading solar panel suppliers in china. Its hot selling products include: 72 cells solar panel, 60 cells solar panel, 36 cells solar panel, and provide customized solar panel. the factory has strict quality control, please contact us! https://www.oushangsolar.com/products/1 , 0w-30w-solar-panels.html

Customized Solar Panels custom solar panel manufacturer solar panel manufacturers in china Customized Pv Panels Description We are able to manufacture PV modules according to clients' requirements. All the things about the panel can be customized, cells, frame, color, backsheets, cables, junction boxes, dimensions, connectors, power and etc. The customized solar panels are widely used all over the world, for mobile system, small family solar system, garden solar system and etc. Hebei Oushang photovoltaic technology Co., Ltd is one of top photovoltaic module manufacturer in China and has annual production capacity of 500MW. Our factory is located in Hebei Province, China and covers 20000 square meters land. OUSHANG SOLAR has engaged R&D, production and sales of solar module products many years. The power range of our solar panels is from 5W to 500W. Products cover monocrystalline solar panel, polycrystalline solar panel, half cell solar modules, solar controller, solar inverter, solar gel battery, solar flood light, solar street light, solar monitor system and etc. We offer OEM service.    We welcome you to send your requirements of solar panels. We will try our best to meet all your products standard. https://www.oushangsolar.com/prod , ucts/customized-solar-panels.html

The Melo Series LED street lights from YIBAI LED LIGHTING to provide a guaranteed 7 years of superior illumination with a minimum total cost of ownership. The roadway luminaires are designed to address the full range of outdoor lighting challenges in municipal lighting, from walkways, bike paths, car parks, residential streets to public roadways. This product family provides an illumination coverage of up to three lanes (and adjacent pedestrian areas) with high uniformity and a maximum spacing between columns. The Melo Series LED luminaires to operate at 25, 35, 55, 60, 90, 120, 120, 150, 180, or 200 watts of electrical power with lumen output ranging from 3125 to 26000 lm. intelligent roadway lighting management system

Minimum Order: 10 long tons

bodivis BCA-2A bodivis Bioimpedance BMR Body Composition Analyzer BCA-2A With 5 testing frequencies and premium accuracy, BCA-2A is a reliable body impedance analysis machine to be used in medical or health care applications. It goes beyond traditional body composition analysis, measuring fat, muscle, and total body water. Total body water data can be divided into intracellular water and extracellular water, values important for understanding a user's fluid distribution in medical, wellness and fitness contexts. Bia body impedance analysis At present, most of the various AC bioelectrical advanced body composition analysis models on the market are only used to indirectly measure body water and estimate body fat content. Our body impedance analyzer uses alternating current as the most commonly used testing method. The complexity and design of various measurement systems are very different, and their intensity, frequency and current are also very different. For patients, electricity to the body is generally undetectable and far from damaging cells or tissues. Once the current reaches or exceeds 50 kHz, they must pass through the extracellular and intracellular space, which has been confirmed by various alternating current bioelectrical impedance analyses. Once the current is sent to the active tactile electrode at a frequency of 50 KHz, its intensity causes the system to measure the reactance and resistance between the other two passive tactile electrodes (quadrupole mode).

Minimum Order: 1 bags

We are a steel structure producer for many international solar EPC contractors. We mainly produce their steel profiles as an OEM manufacturer. We produce the following profile types. C Profile C+ Profile Z Profile U Strut Purlin Profile Binder Profile Omega Profile Kabelon is looking for buyers from worldwide. Please contact us if you are interested.

Minimum Order: 1000

JAYUAN is not only a solar products supplier, but also an electric car charger manufacturer that JAYUAN can use the solar system to charge electric cars as well as to run home appliances. The cable conforms to the IEC Standard (EU) of EV Charging, which suits Electric Vehicles manufactured in European Countries. One end with sheath connects to the EV while The other end connects to the Charging Station. The other option is type 2 to type 1 cable/ev type 2 to type 1 converter, it saves more space when stocking, nice solution for charging. Features of Jayuan Type 2 to Type 2 Charging Cable Matching IEC 62196-2 2010 and SAE J1772 2010. Ergonomic Design. Convenient Connector. Advanced Craft shows a Nice Appearance. Longer Lifespan and Better Bending thanks to XLPO & TPU Material. IP55 for Plug. Specifications of Type 2 to Type 2 Cable Electrical Environment Materials Mechanical Insulation Resistance: >1000MΩ (DC500V) Operating Temperature: -30℃~50℃ Shell (Thermoplastic): UL94-V Flame Retardent Life: no-load plug>10000times Pins Temperature Rise: <50K Waterproof IP Grade: IP66/IP55 Pin: Copper Alloy, Silver Plated External Force: 1meters Drop and 2tons vehicle run over pressure affordable. Withstand Voltage: 2500V / / / / Insertion Force: <100N Contact Impedance: 0.5mΩMax / / / / / /

JAYUAN is not only a solar products supplier, but also an electric car charger manufacturer that JAYUAN can use the solar system to charge electric cars as well as to run home appliances. The cable conforms to IEC & SAE Standard (EU & USA) of EV Charging, suits Electric Vehicles manufactured in European Countries and America. The Type 1 end (with sheath) connect to the EV while The Type 2 end connects to the Charging Station. The other option is Cable Spiral Type, it saves more space when stocking, nice solution for charging. Features of Jayuan Type 2 to Type 1 Charging Cable Matching IEC 62196-2 2010 and SAE J1772 2010. Ergonomic Design. Convenient Connector. Advanced Craft shows a Nice Appearance. Longer Lifespan and Better Bending thanks to XLPO & TPU Material. IP65 for Plug. Specifications of Type2-Type1 EV Charging Cable Electrical Environment Materials Mechanical Insulation Resistance: >1000MΩ (DC500V) Operating Temperature: -30℃~50℃ Shell (Thermoplastic): UL94-VO       Flame Retardent Life: no-load plug>10000times Pins Temperature Rise: <50K Waterproof IP Grade: IP66/IP55 Pin: Copper Alloy, Silver Plated External Force: 1meters Drop and 2tons vehicle run over pressure affordable. Withstand Voltage: 2500V / / / / Insertion Force: <100N Contact Impedance: 0.5mΩMax / / / / / /

JAYUAN is not only a solar products supplier, but also an electric car charger manufacturer that JAYUAN can use the solar system to charge electric cars as well as to run home appliances. Optic Fiber Cable/Fiber Optic Cable is a kind of communication line, which is composed of a certain number of optical fibers in a certain way and is covered with a sheath or an outer sheath, to realize the transmission of optical signals. The basic structure of fiber optic line is generally made up of cable core, reinforcing steel wire, filling material and sheath, and other components such as a waterproof layer, the buffer layer and insulating metal wire according to the need. As one of the leading fiber optic cable manufacturers, our company also provide custom fiber optic cable types depending on customers' requirements. If you want to know fiber optic cable price/cost of fiber optic cable, please contact us.