1.0mpa RO Water Treatment System , 12m3/H RO Water Filter Plant

Reverse osmosis system

Introduction:Reverse osmosis is a membrane separation operation that uses pressure
difference as driving force to separate solvent from solution. Because it is
opposite to the direction of natural penetration, it is called reverse osmosis.
According to the different osmotic pressure of different materials, the method of
reverse osmosis pressure greater than osmotic pressure, that is, reverse osmosis
method, can be used to achieve the purpose of separation, extraction, purification
and concentration.





Reverse osmosis membrane is an artificial semi-permeable membrane with certain
characteristics made by simulating biological semi-permeable membrane, and it is
the core component of reverse osmosis technology. The principle of reverse osmosis
technology is that under the pressure greater than the osmotic pressure of the
solution, other substances can not pass through the semi-permeable membrane to
separate these substances from water. The membrane pore size of the reverse osmosis
membrane is very small, so it can effectively remove dissolved salts, colloids,
microorganisms, and organic matter in the water. The system has the advantages of
good water quality, low energy consumption, no pollution, simple process and easy
operation.
Reverse osmosis membranes are classified into RO (reverse osmosis) membranes and NF
(nanofiltration) membranes according to different filter pore sizes.


Application:

1. It is used for the preparation of pure water and high-purity water. It has been
widely used in many industrial fields such as medicine, chemical industry,
electronics, coating, beverage and medium and high pressure boiler feed water.
2. It is used in the pre-treatment of boilers, thermal power stations, chemical
industry, light industry, textiles, medicine, biology, electronics, atomic energy
and pure water treatment. It can also be used in the occasions of hard water
softening and deionized water preparation in industrial production. Decolorization
and purification of food and drugs, recovery of precious metals and chemical raw
materials, treatment of electroplating wastewater, etc.
1.0mpa RO Water Treatment System , 12m3/H RO Water Filter Plant 0

Equipment description:

1. Two control modes of manual and automatic can be realized. The trigger
conditions of automatic mode are liquid level, flow, conductivity, running time,
etc.
2. There are single-stage and multi-stage design methods, designed according to
specific conditions.
3 There are two operating mechanisms, single-level and double-level, designed
according to specific conditions.
4. Membrane elements with multiple functions and uses, adapted according to
operating requirements.
5. There are single-level pressurization and multi-level inter-stage
pressurization, designed according to water inlet conditions.

Click to Enlarge