Hot oil circulating pump for thermal fluids heating system

RY Hot oil circulating pump for thermal fluids heating system Horizontal, Single
stage single suction cantilever foot support structure, the inlet of pump is axial
suction, the outlet is vertical upward. The pump is installed on the baseplate
together with the motor. Double end ball bearing support with the front end with
lubricating oil and the rear end lubricated with lubricating grease. There is a
guide pipe in the middle for observing the sealing recovering thermal oil, Air-
cooled for natural heating dissipation The combination of packing seal and
mechanical seal is adopted. High-temperature resistant packing seal and hard alloy
mechanical seal for the good sealing under high temperature conditions. PTFE lip
seal. The pump is used to transfer high temperature liquids without solid
particles. The fluids temperature up 350 degrees Celsius. Pump material: cast iron,
stainless steel etc. Application Widely used in hot oil furnace oil supply
circulation systems and hot oil heating circulation systems in industries such as
petroleum, chemical, rubber, plastics, pharmaceuticals, textiles, printing and
dyeing, road construction, food, and machinery etc.

Minimum Order: 1 sets

Click to Enlarge