Overhead Line Automatic Splices

Main Character：
1.No special tools required for installation, no need crimping operation.
2.Automatic Splice is tension-dependent device that the line must have at least 10%
of the rated breaking strength during installation to ensure
reliable electrical connection.
3.The current passes through the wire to the metal crucible, flows through the metal
crucible to pass the current to the outer casing, and the outer casing transmits the
current to the metal crucible, which is transmitted from the metal crucible to the
conductor.
4.The loop resistance of the Automatic Splice is not more than 1.1 times the loop
resistance of the isometric conductor. The metal crucible can penetrate the residual
oxide layer on the surface of the conductor ,so that electrical conductivity is
Reliable.

Minimum Order: 1 pieces

Click to Enlarge