QZL-2/155 Aluminum Round Wire

1. The temperature index test shall be carried out on the unimpregnated
enameled wire specimen with a nominal diameter of 1.000 mm and a grade 2 film
thickness in accordance with GB/T4074.7-2009.
2. The temperature index shall not be less than the specified value of the
relevant product standard, and the failure time at the lowest test temperature
shall be not less than 5000h.
3. When requested by the user, the manufacturer shall provide proof that the
enameled wire meets the temperature index requirements.
4. Note: The temperature index for the extrapolated life of 20000h is only for
unimpregnated enameled wire samples, not as part of the insulation system. The
Celsius temperature relative to the temperature index is not the recommended
enameled wire use temperature because the temperature of use is related to many
factors, including the type of equipment involved.
See the requirements of the relevant product standards for refrigerant
resistance.
Straight weldability is not applicable.
Thermal bonding can be found in the relevant product standards.
The dielectric loss factor can be found in the relevant product standard.
https://www.fd-enameledwire.com/produ , ct/aluminum-enamelled-wire/qzl-2-155-
polyester , -enameled-aluminum-round-wire.html

Minimum Order: 100 dozens