RoHS 1.2W/MK Thermal Conductive Pad 20 Shore OO Hardness For EV Battery

TP 120 is an extremely soft gap filler pad, design to be a versatile thermal
workhorse. With a shore hardness of 20 (00), and thermal conductivity of 1.2 W/
mK, TP 120 will not overstress applications and provide low contact resistance
even in the most varying of applications.



Battery management system is an important part of electric vehicle power
battery system. On the one hand, it detects, collects and preliminarily
calculates the real-time state parameters of the battery, and controls the on-
off of the power supply circuit according to the comparison between the
detected value and the allowable value; On the other hand, report the collected
key data to the vehicle controller, receive the instructions from the
controller, and coordinate with other systems on the vehicle.



In order to improve the utilization of battery, prolong the service life of
battery and monitor the status of battery in real time, the corresponding
battery management system is also gradually upgraded. The battery management
system needs a lot of calculation and signal control during operation. With its
development towards simplification and miniaturization, the temperature of its
internal components will continue to rise. Excessive temperature will affect
the performance of electronic devices, lead to transistor damage, and then
affect the normal operation of the battery management system, battery pack and
even supporting equipment. Through the protective plate and MOS tube assembly
in the battery management system, a heat conducting sheet is set between the
upper shell and the lower shell to conduct heat to the upper and lower shells
for heat dissipation.



Due to the excellent compressibility, plasticity and softness of the thermal
conductive interface material, the above problems can be well solved. The
thermal conductive pad can be well used to cover very uneven surfaces. It has
low stress on the structure, plays a role of buffer protection, shows small
thermal resistance under low pressure, and can be cut into different shapes
according to customer needs. It is resistant to high and low temperatures and
oxidation. The product performance is stable and reliable after long-term use.

Click to Enlarge