Industrial Machinery & Equipment

With the UDS module the Traco Power supplier can be extended to a perfect DC- UPS with automatic battery- backup. This function is very often required in applications where a time delayed shutdown of a system is necessary. To monitor and control the power supply a signal module can be installed. For parallel operation with active power sharing a redundancy option is available. This flexibility makes the TIS series power supplies a cost effective solution for many industrial applications. SPECIFICATIONS Output Voltage：24 VDC Output Adjustment 1：24-28 VDC Output Current：6000 mA Power Rating：150 W Number of Output：single Input Voltage：93-132 and 187-264 VAC Housing Type：Metal Case Mounting Type：DIN-Rail Mount Connection Type：Screw Terminal Length：157 mm Width：56.7 mm Depth：114.6 mm Efficiency：85 % Maximum Temperature：70 °C Minimum Temperature：-25 °C Weight：800 g Ripple and Noise：50 mVp-p max. Remote On/Off：No Safety Approvals：EN 60950-1, EN 62368-1, UL 508 Insulation System：Reinforced Insulation I/O Isolation Voltage：3000 VDC We, a Industrial Control Instrument supplier, also offer the following products, such as ISOPAD, Reotemp, SPONSLER and so on. Welcome to get in touch with us, as a Special equipment and dedicated accessories distributor, Bingde is prepared to help you with qualified products.

Model number: M120-1798/ M120-2023 Designed for Rugged Outdoor Use Positive Spring to Center or Friction Drive Mechanical Safety Lock Standard Corrosion Resistant Over 1,000 Variations Available Product Introduction： Commonly used for throttling and many other applications, the Model 120 joystick may also be used in any application where single axis control is required. Here are the qualification of a PQ Controls supplier can offer: SPECIFICATIONS Electrical Data Supply Voltage：Potentiometer-based (determined by config) Output：Proportional or switched (specify) Mechanical Data Mechanical Life：10,000,000 cycles maximum (sinusoidal) Travel：Bi-Directional + 33.5°, Uni-Directional +67° Environmental Data Operating Temperature：-40 - 85 degrees (C) Protection：Heavy Duty High Cycle Life Environment Resistance：Humidity, Rain/Water, Sun/UV Exposure Engine oil, Coolant, Phosphate Cleaners We, an Industrial Control Instrument supplier, also offer the following products, such as Allen-Bradley, DNFT, MTL. Welcome to get in touch with us, as a Special equipment and dedicated accessories distributor, Bingde is prepared to help you with qualified products.

Magnetic belt conveyors offer a low-maintenance option for the transportation of ferrous materials, including small chips, fines, small components, and stamped blocks. These conveyors are designed with a fully enclosed, submersible, and waterproof structure. The magnets positioned beneath the stainless steel skids effectively attract ferrous materials and particles, transporting them up the incline. With no external moving parts, magnetic conveyors present a safe and easy-to- maintain solution. The magnetic force of the strong magnetic field generated by the permanent magnet material is used to adsorb the chips on the working magnetic plate of the chip removal machine, or the iron chips in the oil and the emulsion in the form of particles, powders and the length of ≤100 mm are adsorbed and separated, and transported to the specified chip collecting box. It is the most suitable model for conveying small debris such as short roll chips, fine iron chips and cast iron chips. The amount of chip removal can be adjusted by changing the conveying speed and magnetic plate width. Production can be customized according to customer needs. Metal Chip Conveyor Features Ideal for ferrous chips/fine chips, small parts and stampings Submersible waterproof construction Fully enclosed with no moving external parts Special design for difficult wet fine particle applications Self-adjusting chain tensioner Heavy-duty stainless steel skids Transport wet or dry materials at steep angles Safety/Maintenance Friendly Minimal maintenance required Customized Heavy-duty stainless steel top cover/sliding plate Completely enclosed, no moving parts or belts to replace Self-adjusting chain tensioner Carries wet or dry material at a steep angle Submersible waterproof construction APPLICATIONS Machine Tool Chip Removal  Parts Handling Stamping Scrap Handling Sawing

Cable drag chains, or “energy chains”, are mechanical components in automation technology. They consist of a chain that can only be moved in one direction. In conventional applications, drag chains are made of plastic elements. At the top, there is a flap that can be opened at any time. If opened in this way, any type of cable can be inserted. After securing the cable and closing the flap, the cable is permanently fixed without damage or drilling. Typical applications Drag chain is used for reciprocating motion occasions, the built-in cable, oil pipe, gas pipe, water pipe, etc. to play a traction, protection. Drag chain has been widely used in CNC machine tools, electronic equipment, glass machinery, injection molding machine robot, handling machinery, plastic machinery, lifting equipment, woodworking machinery, automotive industry, industrial vehicles, metal processing machinery, machine tools, casting machinery, port equipment, etc.. Features 1.Designed for horizontally moving loaders and large cranes. 2.Modular design with fewer components, greatly reducing installation time. 3. Reasonable price, various materials and specifications. 4. Includes a complete set of brackets, guide channels, snaps, etc. 5. Drag chains or cables can be inserted directly into the guide channel, which can flexibly meet the consumers' installation needs in any environment.

Way covers are protective components used on milling machines and other types of CNC machinery to protect the machine's guideways, ball screws, and other sensitive parts from dust, debris, metal shavings, and coolant splashes. They help ensure that moving parts are shielded from contamination, which can prolong machine life, enhance precision, and reduce maintenance requirements.  Beam steel telescopic cover Application Protection from Contaminants: Way covers shield critical machine components, like guideways and ball screws, from debris, coolant, and dust. This keeps the machine running smoothly and reduces wear on these parts. Enhanced Precision: By keeping debris off the machine’s moving parts, way covers help maintain accuracy in milling operations, as contaminants can affect alignment and movement. Reduced Maintenance: Way covers minimize the need for frequent cleaning and repairs by preventing buildup on critical components. This helps to lower maintenance costs and machine downtime. Extended Machine Life: By protecting against wear and environmental factors, way covers can significantly extend the machine's operational life, making them essential for machines in heavy or high-speed applications. https://www.machine-protect.com/

The installation of bellows and covers on machinery can significantly minimize or even eliminate expensive maintenance and downtime. It is advisable to safeguard exposed leadscrews, ballscrews, splines, shafts, and other machine components with LIONSHELL bellows and covers. LIONSHELL provides a comprehensive range of both standard and custom bellows and covers. These products can be tailored into various shapes, including round, square, rectangular, C-shape, or U-shape, with options for collar or flanged ends. Additionally, curtain bellows and platform skirts are available. The bellows and covers are constructed from coated fabrics, which offer enhanced durability and abrasion resistance compared to molded boots. Rubber Protective Cover Product Feature It has excellent impact resistance,as well as excellent wear resistance and high tensile strength. Used on sleeve bearing,wear-resistant plate,conveyor roller,roller and other parts,it has the characteristics of reducig weight,reducing noise and improving wear.

The vertical bellow cover is composed of flame retardant cloth or nylon cloth, PVC board, metal or non-metal connecting plate, which can have the functions of flame retardant, dust proof, oil resistance, acid and alkali resistance, etc., and has the characteristics of simple structure, long stroke, small compression, long life, good sealing, low noise, light weight and fast running speed. Production can be customized according to customer needs. Machine way covers are guards that are used to protect machine rails, guideways and linear tracks from contaminants such as dust, debris, coolant and other debris. They help prevent damage to critical components, thereby extending the life and performance of the machine.

2 months ago in early February, AAK customized a PV72-30AM Proportional Valve Assembly for a European customer. The valve assembly includes a HydraForce solenoid operated, pressure compensated, spool type, normally closed, proportional priority flow control valve PV72-30AM-0-N-12DG, and a HydraForce CV08 series Check Valve, assembled to an aluminum block. This is just very similar to a valve and block assembly that we shipped to a customer in Russia before, and we finished it in 15 days and a/f’d it to customer by end February. 2 weeks ago in early April, we received email from customer that they are happy with test result and are willing to place order for another batch – part of them to be shipped by air and remaining to be shipped by railway or sea. This batch is now in production and will be ready by end April. PV72-30 proportional valve is one of our best sellers and is usually in stock shortage. Last week, we just shipped a test order to a customer in Belarus. There are several hydraulic cartridge valve manufacturers in Ningbo China who can offer PV72-30 model, but AAK is the top choice in combining the price, quality, fast delivery and efficient customizing service. If you are also in need of this model, do not hesitate to contact us. You will not be disappointed. AAK HYDRAULIC VALVES (845) 2025-04-15

Minimum Order: 1 bags

Which is also known as RV gears or cycloidal reducers, are a type of mechanical transmission device that has gained widespread use in various industrial applications due to their unique combination of performance characteristics. These reducers are known for their high precision, efficiency, and durability, making them a popular choice for precise motion control and power transmission. China Manufacture Robot arm gearbox RV gearbox Color: Silver Type:RV Series Place of Origin:zhejiang, China Brand Name:Arcsec Drive Applicable Industries: Hotels, Garment Shops, Building Material Shops, Manufacturing. Less than 1 arc-min Backlash Component in-line version for greater design and space saving flexibility Very compact with high torsional rigidity Integrated Angular bearings for large thrust & overhung moment capacity High Ratio availability(up to 185:1)without increasing gearbox size Torque capacity up to 5X rated torque(E-Stop) Size:20,40,80,110,160,320,450 Combinative structure of RV reducer RV reducer include:Shaft,Case, Pin,  Cycloidal gear,Main bearing, Hold flange ,Eccentric shaft, Planetary gear.RV  slow down in two levels, The first stage is the gradient open planetary gear deceleration mechanism，The second stage is the pendulum needle wheel deceleration mechanism.

The planetary gearbox is designed in overall square. Three integrated designs, the front housing gear ring with integrated design, the output shaft planetary frame with integrated design, the input shaft sun gear with integrated design, combine planetary features. It can be used in frequent reciprocating motion and acceleration and deceleration motion. Factory directly wholesale high quality straight tooth planetary reducer The planetary gearbox is designed in overall square. Three integrated designs, the front housing gear ring with integrated design, the output shaft planetary frame with integrated design, the input shaft sun gear with integrated design, combine planetary features. It can be used in frequent reciprocating motion and acceleration and deceleration motion. Advantages High performance High rigidity High torque High efficiency Low noise Low backlash Wide application Easy installation Main Used Are Of Planetary Gearbox Industrial robot Service Robots Humanoid robot Metal Machine Tools Medical Devices Analysis,Test Equipment Energy Related equipment Paper making Equipment Printed circuit manufacturing equipment Wood light metal,plastic machine tools Semiconductor manufacturing equipment FPD manufacturing equipment Space equipment

Which is a compact structure mechanism including three main parts as wave generator, flex-spline and circular spline, combined with high rigidity cross roller bearing is a very robust and easy to use gear-head solution, widely applied for industrial robot and precision machinery. Arcsec Drive Harmonic Drive Solutions Arcsec Drive Harmonic Drive Solutions (strain wave gearing) offers the ultimate in precision motion control technology. Our harmonic drive product range includes gearheads and component sets. Harmonic drive gearing is low to zero backlash by design. It provides high transmission accuracy and can support a high ratio reduction in a single stage with lower inertia. The highly accurate, torque dense design makes harmonic gears a great solution for robotic and positioning applications. We manufacture a wide range of harmonic drive gearing options in our line of Arcsec Drive Harmonic Drive Solutions. Advantages 1,High Precision Gear Many teeth in the position of the two 180-degree symmetry Joggle.Gear tooth pitch error and the cumulative influence of pitch error on rotation accuracy is average. Very high position accuracy and running accuracy can be obtained. 2,High Ratio Single harmonic drive gear ratio of up to i=30 to 500. Simple structure, three basic components on the shaft can be achieved with high reduction ratios. 3,High Load Capacity Harmonic drive, tooth and meshing of the teeth is the contact, together with colleagues more meshing number of teeth, thus the load per unit area is small. Higher load capacity than other forms of transmission. 4,Small Volume and Light Weight 5,High Transmission Efficiency and Long Service Life 6,Stable Transmission and Low Noise ADH series A combination product that with large diameter hollow hole,flat shape,which is easy to operate ADHN series Light weight product,20%lighter than standard products. ADHG series High torque.Compare with standard products,LHG series torque capacity is 30%higher And the service life is increased by 43%,with high load capacity and higher liability Main Used Are Of ADH Series Harmonic Drive Industrial robot Service Robots Humanoid robot Metal Machine Tools Medical Devices Analysis,Test Equipment Energy Related equipment Paper making Equipment Printed circuit manufacturing equipment Wood light metal,plastic machine tools Semiconductor manufacturing equipment FPD manufacturing equipment Space equipment

CRA-RI30-40-PRO-51-B Features: Tiny and Precise Outer diameter: 40mm Length:51.6mm without brake /67.3mm with brake Weight:0.17kg / 0.23kg Max.Torque:2.8N.m Max.Speed:45RPM , value encoder Compact structure Volume(same torque) is extremely optimized Smallest volume and lightest weight PRO serial robot joint modules is a standardized joint module product launched by our team on the basis of FOC control board , high-precision multi-turn absolute encoder, frameless torque motor, precision harmonic reducer and other main components. Mini size 40,size 52,size 60 is available. It is suitable for high-end application scenarios such as humanoid robots, exoskeleton robots, and collaborative robots https://www.arcsecdrive.com/

Features: Tiny and Precise Outer diameter: 70mm Length:60.4mm without brake /67.7mm with brake Weight:0.77kg / 0.83kg Max.Torque:35N.m Max.Speed:60RPM e , Rob 70F has an outer diameter of only 70mm, a height of 60.4mm and a through- hole of 18mm.770g super light weight, Rated torque up to 5.4N.m. This eRob series robot joint modules is a standardized joint module product based on our own servo drives and absolute encoders based on years of experience in serving customers, making robot development easier, faster, safer. This eRob series robot joint modules include eRob70, eRob80, eRob90, eRob110, eRob142, eRob170, etc., with exquisite design and compact structure. The compact size includes servo drivers, motor side absolute value encoder, output side absolute value encoder, and frameless torque motors, brakes, precision harmonic reducers and other main components, which save customers hundreds of mechanical and electronic components selection, design, procurement, assembly labor and time costs. Four communication is available for this actuator: CANopen, CAN Bus, EtherCAT, Modbus.

YC160W wheel excavator is a new generation of full hydraulic wheel excavator independently developed by YUCHAl heavy industry. ltadopts high-power and low fuel consumption national three standard engine to ensure the strong power and power reserve of the wholemachine. The accurate matching of high-eficiency hydraulic system and bridge box ensures the random switching of working state andwalking state. The hydraulic system of the whole machine is matched with imported hydraulic components, which has thecharacteristics of "high reliability, high reliability and high relability’ At the same time, it can provide a variety of specialconfigurations to meet the needs of different countries and customers.