Industrial Machinery & Equipment

1. Adoption of 32-bit DSP, pure sine wave subdivision technology 2. Low-noise, low-vibration and low temperature rising 3. Voltage 24-80VDC,or 20-60VAC 4. With 8 stalls output current setting, peak current 7.2A 5. With16 stalls microstep subdivision setting 6. Automatic half current, self-test, over voltage, under voltage, over current protection 7. Internal optical isolation, highest frequency response 200KHZ. 8. Suitable for current range 2.4-7.2A 2,4-phase nema23, nema34 Hybird stepper motor

Product Description High speed non-stop vertical turrent rewinder with auto core loading system The machine is Euro technical auto core loading system, automatic turrent rewind system, automatic unloading system can realize machine non stop working . 4 rewinding shafts Main Technical Specification: Max. material width 450mm Max. rewinding diameter 350mm Power voltage 380V,3 phase(or can make according to your request) Total power 8KW speed 5-120m/min Overall dimension 1.45m*1..42m*1.7m Machine weight 3000kg

Descriptions of induction heat treatment equipment: Induction heating machine is a method of heating a conductor material such as a metal material. It is mainly used for metal thermal processing, heat treatment, welding and melting. Induction heating machine is the use of electromagnetic induction to generate electricity in the interior of the material being heated, relying on the energy of these eddy currents for heating purposes. The basic components of an induction heating system include induction coils, AC power and work-pieces. The coils can be made into different shapes depending on the heating target. The coil is connected to a power source that supplies an alternating current to the coil, and the alternating current flowing through the coil produces an alternating magnetic field that passes through the work-piece, which causes the work-piece to vortex to heat. Technical parameters of induction heat treatment equipment : Control Mode All Digital Circuit Control Working Mode Manual Mode/Automatic Mode Number of Heating Current Setting 5-stage The number of stored workpiece parameters 10/Mode Content of Working status Time, Current Alarm Interface Overcurrent, overpressure, under water, undervoltage, phase loss, overheat. ect. Model PHC-S-50 Output power 5-50KVA Output frequency range 10~60KHz Length of Main Extendion Cable 2-5m Input Voltage 380V±10% Input Frequency 50/60Hz Input power factor 0.95 Min Circuit Breaker 3P-63A Max Inlet Water Temp 35℃ Water Pressure(Max/min) 4/6bar Working Environment Temp +5℃~+50℃

The Optical Coating Systems manufactured by Guotai are designed to maximize coating uniformity and production throughput, and have supported to a wide range of coating applications to include anti-reflection and highly reflective coatings, edge filters, beam splitters, optical filters, laser diodes, polarizers, gain flattening filters, and other complex non-quarter wave design including low stress and high laser damage threshold coatings. Flexible Configuration The system can be carefully tailored to support client’s specific coating application and production requirements. Chamber sizes ranges from 400mm to 2700mm, which can be used as laboratory or mass production equipment. Configuration options include Thermal Evaporation, Electron Beam Evaporation, and Electron Beam Evaporation with Ion Assist; Substrate fixturing is available in single rotation, planetary, calotte, flip planetary, and unique arrangement for specific requirements; Support front side heating or back side heating, or both. Excellent Performance and Reliability Guotai recognizes that user-friendliness and reliability of optical coating equipment is paramount to client’s success. The system incorporates proven design features based on decades of experience that produce exceptional results with easy to use software and dependable run to run consistency. We strive to continuously obtain customer feedback from coating engineers, operators, and maintenance personnel to improve design features that will minimize system downtime and increase overall productivity. Subsystem equipment of our systems are from reliable and brand manufacturers such as Baosi, Edwards, Inficon, Burkert, Omron to name a few. This allows our clients to benefit from the depths of Guotai and its vendors for the availability of service and spare parts.

Cold Forging Header Machine Metal tech cold forging header machine / bolt header machine, the function is the first molding and the second punching products, which is mainly used for forming the heads of the screw products, the work principle is line materials calibration, accessing lines, sending materials to the main mold, first punching initial forging, and second punching the formed blank materials and withdraw. The work gets done without any letup, the production capacity can be up to about 200 every minute, which belongs to the more advanced products in the current technology. Specifications of Cold Forging Header Machine Model Maximum diameter （mm） Maximum length （mm） Ram Stroke (mm) Output Rate (pcs / per min) Main Mould (mm) Cut-off Die (mm) Punch Die(mm) Cutter Size (mm) Mechanical Dimensions (mm) Main Motor (kw) Net weight (kg) SJZ12-3 4 20 40 160-190 Φ20*36 Φ13*25 Φ18*50 6*25*42 1.4*0.75*0.9 1.1 624 SJZ12-4 5 40 60 140-170 Φ32*60 Φ15*30 Φ25*65/70 10*35*72 1.8*0.85*1.5 2.2 1274 SJZ12-5 7 60 90 110-140 Φ32*80 Φ20*35 Φ30*75 10*35*72 2.3*1.08*1.25 3 2080 80 110 90-110 Φ32*100 Φ20*35 Φ30*80 10*35*72 2.4*1.15*1.35 2145 100 130 80-100 Φ35*120 Φ20*35 Φ30*80 10*35*72 2.5*1.15*1.35 2210 150 190 80-100 Φ40*180 Φ20*35 Φ35*100 10*35*72 2.6*1.15*1.35 2990 SJZ12-6 9 90 120 80-100 Φ50*120 Φ24*40 Φ35*100 12*35*77 2.7*1.4*1.6 5.5 3380 120 150 70-90 Φ50*150 Φ24*40 Φ35*100 12*35*77 2.8*1.4*1.6 3640 150 190 60-70 Φ50*180 Φ24*40 Φ35*100 12*35*77 3.0*1.4*1.6 4160 170 230 50-60 Φ50*220 Φ24*55 Φ35*120 12*35*77 3.2*1.4*1.6 4360 200 250 40-50 Φ50*240 Φ24*55 Φ35*120 12*35*77 3.65*1.4*1.65 4940 250 290 30-45 Φ50*290 Φ24*60 Φ35*140 12*35*77 3.7*1.5*1.7 5460 SJZ12-8 11 120 160 60-80 Φ60*160 Φ28*45 Φ40*120 12*42*90 3.75*1.6*1.8 7.5 4940 150 190 60-70 Φ60*190 Φ28*45 Φ40*120 12*42*90 3.9*1.6*1.8 6240 200 250 40-50 Φ60*240 Φ28*60 Φ40*150 12*42*90 4.15*1.6*1.85 6500 250 290 30-45 Φ60*290 Φ28*60 Φ40*150 12*42*90 4.3*1.6*1.9 7800 SJZ12-10 13 120 160 50-60 Φ80*160 Φ35*50 Φ50*150 16*55*115 4.8*1.8*1.32 11 8450 180 230 50-60 Φ80*220 Φ35*50 Φ50*150 16*55*115 4.8*1.8*1.32 8650 220 270 40-50 Φ80*260 Φ35*50 Φ50*150 16*55*115 5.0*1.8*1.32 9100 SJZ12-12 15 150 190 40-50 Φ80*200 Φ45*60 Φ60*180 18*60*125 5.2*1.9*1.8 18.5 14040 200 250 30-40 Φ88*260 Φ45*60 Φ60*180 18*60*125 5.2*1.9*1.8 14300 280 330 30-40 Φ88*340 Φ45*60 Φ60*180 18*60*125 5.2*1.9*1.8 15600 300 350 25-35 Φ88*360 Φ45*60 Φ60*180 18*60*125 5.2*1.9*1.8 15860 Advantages of Cold Forging Header Machine Metal tech Cold Heading Machine use high-quality material parts, strict quality management all these guarantee superior quality and long performance Cold Heading Machine life. What technology do bolt header machine and screw heading machine applied? Metal Tech's bolt header machine and screw heading machine applied the main technology is as follows: 1. Straightening: the front of the machine is equipped with a straightening mechanism, which can fully straighten the wire before forming, and also remove the dirt on the wire surface 2. Cutting: cut the wire of appropriate length through the cutting mechanism and send it to the forming mechanism 3. Forming: This is the main technology of the machine. Through two or more molds, the wire rod is formed into the final product As one of cold heading machine manufacturers, we also have types of weld mesh manufacturing machine for sale, if you have needs, please contact us. Now the price of wire drawing machine is affordable, if you have needs, please leave us a message.

Minimum Order: 1000

The GF3000 series stationary three phase electricity meter test bench is a fully automatic system that enables simultaneous, multi-position calibration and verification of three-phase electric energy meters error. FUNCTIONS: 1．Timing error test. 2．Creeping and starting test. 3．Equipped with RS232 communication port. 4．Calibration and verification of constant. 5．Standard deviation, 24 hour variation test.

Minimum Order: 1 bags

The GF1000 series multi-positions single phase kWh meter test bench can measure mechanical meters, electronic mechanical meters and electricity meter error by the way of automatic, semi-automatic or manual operation.It composes of single phase programmable power source, high precision single phase reference energy meter, meter suspension test rack, FEATURES: 1．With auto PC control software; 2．With barcode scanning function optional; 3．Meter positions can be chosen from 3 - 48; 4．Self-check and perfect protection function; 5．High resolution of voltage, current and power;

Minimum Order: 1 bags

TheGF112D is a portable one-phase power meter tester. It used for testing the error of single-phase power meter on spot. It can test harmonic,power factor,phase angle and energy. features: Accuracy:0.1% or 0.2% Range:0-300V;60mA-600A Power supply:AAA type, Li rechargeable battery, 2700mAh, 3.6V it can work 48 hours continuously Warming-up time:<2 min Frequency:40-70Hz

Minimum Order: 1 bags

The product GF112 is a handheld 1-phase electricity meter tester. It mainly used in electric power departments, electric lab or field. It can measure error,voltage ,current, power an frequency at site. Features: Accuracy: 0.2%,0.5% Warming-up time:<5min Power consumption:<5VA Range: 0-3--V;0-120A Store:500sets data Communication port: RS232

Minimum Order: 1 bags

GF312B2 portable three phase reference meter high accuracy 0.02%, with all kinds of optional clamp on ct and smart optical sampler. It can be applied in electrical laboratory or on site. it will be ensured by a combination of measures such as the use of 24bit A/D converter. APPLICATION: 1．Power plant; 2．Electrical laboratory; 3．Energy meter R & D; 4．Watt-hour meter factory; 5．Metrological service center; 6．Electricity power bureau & power company;

Minimum Order: 1 bags

GF312B portable three phase electricity meter calibrator with printer is used to calibrate three phase, single phase, active and reactive energy meters error. The instrument has a micro printer and portable design. It is very suitable for on-site calibration of electric energy meters. Feature: 1.accuracy:0.05%,0.1%,0.2%< , br>2.Test range:0-600V; 3.With printer 4.Harmonic:2-64times 5.Weight: 12kg 6.IP65

Minimum Order: 1 bags

GF312D1 is a handheld three-phase electricity meter calibrator.It mainly used on site. It has portable design and it can work 10 hours continuously when use Li- polymer battery. Features: 1.accuracy：0.05%，0.1% , ，0.2% 2.Portable design 3.Three power supply modes 4.Protection level: IP51 5.Weight:10.6

Minimum Order: 1 bags

GF312V2 is mainly used to test the error of single-phase electricity meter,three-phase kWH meter and Various active and reactive energy meters. The the instrument adopted high-speed A/D conversion and sends it to DSP for digital processing,which greatly improves the accuracy and stability of measurement. Features: 1.accuracy: 0.02%,0.05%,0.1% 2.Portable design 3.Power recovery 4.Can measure two meters at the same time 5.Range: 0-600V; 0-120A 6.7 inch TFT color LCD 7.Three power supply modes 8.Harmonic: 2-51 9.Power consumption:≤13VA 10.Weight: 1.8kg

Minimum Order: 1 bags

This instrument is a high precision DC electricity meter test equipment.The highest accuracy is 0.02%. And it has wide test range 0-115V and 0-600A. It mainly test the DC electricity meter error. Features: 1.test all kinds of DC energy meter,DC power meter 2.Accuracy: 0.02%,0.05% 3.Portable design 4.Can store 10000pcs meter data 5.Overload, short circuit,open circuit protection

Minimum Order: 1 bags